kernel/linux.git/drivers/net/wireless/ath, branch v2.6.32

ath9k: set ps_default as false

2009-11-23T21:17:21+00:00

Copied from original one-line patch here: http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26 Signed-off-by: John W. Linville

ath5k: add LED definition for BenQ Joybook R55v

2009-11-10T21:21:14+00:00

Setup the GPIOs for the BenQ Joybook netbook. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville

ath5k: add LED support for HP Compaq CQ60

2009-11-10T21:21:13+00:00

Add GPIO configuration for the Compaq CQ60 laptop Reported-by: David Dreggors Signed-off-by: Bob Copeland Signed-off-by: John W. Linville

ath5k: don't reset mcast filter when configuring the mode

2009-11-10T21:21:13+00:00

We should not zero out the multicast hash when configuring the operating mode, since a zero value means all multicast frames will get dropped. Also, ath5k_mode_setup() gets called after any reset, so the hash already set up in configure_filter() is lost. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville

ath9k: fix misplaced semicolon on rate control

2009-10-30T19:50:25+00:00

The patch e43419f9: ath9k: downgrade assert in rc.c for invalid rate downgraded an ASSERT to a WARN_ON() but also misplaced a semicolon at the end of the second check. What this did was force the rate control code to always return the rate even if we should have warned about it. Since this should not have happened anymore anyway this fix isn't critical as the proper rate would have been returned anyway. Cc: stable@kernel.org Reported-by: Jiri Slaby Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville

ar9170: fix bug in iq-auto calibration value calculation

2009-09-29T21:25:16+00:00

This patch fixes a embarrassing bug which was introduced by: "[PATCH] ar9170: implement frequency calibration for one-stage/openfw" The phy_data variable initialization has to done outside the for-loop scope. This is because the for-loop uses u32 phy_data variable more like a 4-byte field. But in each run only a single byte is calculated. Therefore phy_data content needs to stay the same for at least 3 more iterations, before the complete set can be uploaded. Reported-by: Andrew Morton Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville

Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

2009-09-24T22:13:11+00:00

Conflicts: drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/cpc-usb/TODO drivers/staging/cpc-usb/cpc-usb_drv.c drivers/staging/cpc-usb/cpc.h drivers/staging/cpc-usb/cpc_int.h drivers/staging/cpc-usb/cpcusb.h

ath9k: Initialize txgain and rxgain for newer AR9287 chipsets.

2009-09-23T15:35:54+00:00

Signed-off-by: Vivek Natarajan Signed-off-by: John W. Linville

ath9k: Fix RFKILL bugs

2009-09-23T15:35:54+00:00

This patch fixes 2 issues in RFKILL: * Calling wiphy_rfkill_stop_polling() in ath9k_stop would mean that the driver cannot report HW status when the radio is re-enabled. Move this to ath_detach(). * Calling ath_radio_{enable/disable} without checking the current state results in ath_radio_enable() being called repeatedly for every invocation of rfkill_poll(). This is not needed in any case since wiphy_rfkill_set_hw_state() would call ->stop() if the radio has been disabled. Signed-off-by: Sujith Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville

ar9170usb: add usbid for TP-Link TL-WN821N v2

2009-09-23T15:35:53+00:00

This patch adds the usbid for TP-Link TL-WN821N v2. Cc: stable@kernel.org Reported-by: Fabian Lenz Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville