kernel/linux.git/drivers/net/wireless/airo.c, branch linux-2.6.18.y

[PATCH] irq-flags: drivers/net: Use the new IRQF_ constants

2006-07-02T20:58:51+00:00

Signed-off-by: Thomas Gleixner Cc: Ingo Molnar Cc: "David S. Miller" Cc: Benjamin Herrenschmidt Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Remove obsolete #include

2006-06-30T17:25:36+00:00

Signed-off-by: Jörn Engel Signed-off-by: Adrian Bunk

[PATCH] wireless/airo: minimal WPA awareness

2006-05-05T21:10:39+00:00

Running Linux 2.6.17-rc3-mm1 which has this patch included I get this interesting message: airo(eth0): WPA unsupported (only firmware versions 5.30.17 and greater support WPA. Detected 5.30.17) airo_test_wpa_capable assumes that the softSubVer part of the firmware version number is coded in BCD. Apparently, that's not true. I have firmware version 5.30.17 and cap_rid.softSubVer is 0x11==17. Signed-off-by: Michal Schmidt Signed-off-by: John W. Linville

[PATCH] wireless/airo: minimal WPA awareness

2006-04-24T20:26:14+00:00

airo cards with firmware versions of 5.30.17 and higher support WPA. This patch recognizes WPA-capable firmware versions and adds support for retrieving the WPA and RSN information elements from the card's scan results. The JOB and FLAG fields are now independent, since there was no space left in the FLAG field for FLAG_WPA_CAPABLE. Signed-off-by: matthieu castet Signed-off-by: Dan Williams Signed-off-by: John W. Linville

[PATCH] wireless/airo: clean up WEXT association and scan events

2006-04-19T21:25:37+00:00

Airo firmware versions >= 5.30.17 send re-association events to the driver that are currently unrecognized, causing spurious disassociation events to be sent to user space. Loss of sync due to scan requests also results in disassociation events sent to user space. This patch traps those two events; suppressing sync-loss on scan, and sending the correct association event on re-association notifications. Signed-off-by: Dan Williams Signed-off-by: John W. Linville

[PATCH] wireless/airo: cache wireless scans

2006-03-23T21:13:58+00:00

Observed problems when multiple processes request scans and subsequently scan results. This causes a scan result request to hit card registers before the scan is complete, returning an incomplete scan list and possibly making the card very angry. Instead, cache the results of a wireless scan and serve result requests from the cache, rather than hitting the hardware for them. Signed-off-by: Dan Williams Signed-off-by: John W. Linville

[PATCH] wireless/airo: define default MTU

2006-03-23T21:13:58+00:00

The number 2312 was used all over the place to refer to the card's default MTU. Make it a #define and use that everywhere rather than the number. Signed-off-by: Dan Williams Signed-off-by: John W. Linville

[PATCH] wireless/airo: clean up printk usage to print device name

2006-03-23T21:13:58+00:00

Show the specific device that driver messages are about. Signed-off-by: Dan Williams Signed-off-by: John W. Linville

[PATCH] wireless/airo: Remove 'Setting transmit key' info messages

2006-02-28T01:14:58+00:00

These messages end up polluting logs when things like NetworkManager or wpa_supplicant are controlling the driver. They aren't really that useful, and no other drivers output messages like this when the user fiddles with encryption keys. Users can use iwconfig and other wireless-tools methods to determine and change the current transmit key if they wish to do so manually. Therefore, remove the messages. Signed-off-by: Dan Williams Signed-off-by: John W. Linville

[PATCH] wireless/airo: fix setting TX key index plus key in ENCODEEXT

2006-02-17T13:17:00+00:00

The previous patch that added ENCODEEXT and AUTH support to the airo driver contained a slight error which would cause setting the TX key index ignore a valid key-set request at the same time. This patch allows any combination of setting the TX key index and setting an encryption key. Signed-off-by: Dan Williams Signed-off-by: John W. Linville