kernel/linux.git/drivers/net/wan, branch v6.1.168

net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean()

2026-03-04T12:20:54+00:00

[ Upstream commit 36bd7d5deef936c4e1e3cd341598140e5c14c1d3 ] The priv->rx_buffer and priv->tx_buffer are alloc'd together as contiguous buffers in uhdlc_init() but freed as two buffers in uhdlc_memclean(). Change the cleanup to only call dma_free_coherent() once on the whole buffer. Reviewed-by: Christophe Leroy (CS GROUP) Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC") Cc: Signed-off-by: Thomas Fourier Link: https://patch.msgid.link/20260206085334.21195-2-fourier.thomas@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets

2026-03-04T12:20:41+00:00

[ Upstream commit bae8a5d2e759da2e0cba33ab2080deee96a09373 ] When the FarSync T-series card is being detached, the fst_card_info is deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task may still be running or pending, leading to use-after-free bugs when the already freed fst_card_info is accessed in fst_process_tx_work_q() or fst_process_int_work_q(). A typical race condition is depicted below: CPU 0 (cleanup) | CPU 1 (tasklet) | fst_start_xmit() fst_remove_one() | tasklet_schedule() unregister_hdlc_device()| | fst_process_tx_work_q() //handler kfree(card) //free | do_bottom_half_tx() | card-> //use The following KASAN trace was captured: ================================================================== BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00 Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32 ... Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcb/0x5d0 ? do_bottom_half_tx+0xb88/0xd00 kasan_report+0xb8/0xf0 ? do_bottom_half_tx+0xb88/0xd00 do_bottom_half_tx+0xb88/0xd00 ? _raw_spin_lock_irqsave+0x85/0xe0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx___hrtimer_run_queues+0x10/0x10 fst_process_tx_work_q+0x67/0x90 tasklet_action_common+0x1fa/0x720 ? hrtimer_interrupt+0x31f/0x780 handle_softirqs+0x176/0x530 __irq_exit_rcu+0xab/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ... Allocated by task 41 on cpu 3 at 72.330843s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 __kasan_kmalloc+0x7f/0x90 fst_add_one+0x1a5/0x1cd0 local_pci_probe+0xdd/0x190 pci_device_probe+0x341/0x480 really_probe+0x1c6/0x6a0 __driver_probe_device+0x248/0x310 driver_probe_device+0x48/0x210 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x101/0x190 __device_attach+0x198/0x3a0 device_initial_probe+0x78/0xa0 pci_bus_add_device+0x81/0xc0 pci_bus_add_devices+0x7e/0x190 enable_slot+0x9b9/0x1130 acpiphp_check_bridge.part.0+0x2e1/0x460 acpiphp_hotplug_notify+0x36c/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... Freed by task 41 on cpu 1 at 75.138639s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x135/0x410 fst_remove_one+0x2ca/0x540 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0x364/0x530 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device+0xd/0x20 disable_slot+0x116/0x260 acpiphp_disable_and_eject_slot+0x4b/0x190 acpiphp_hotplug_notify+0x230/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... The buggy address belongs to the object at ffff88800aad1000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 28 bytes inside of freed 1024-byte region The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x100000000000040(head|node=0|zone=1) page_type: f5(slab) raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88800aad1000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88800aad1080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800aad1100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fix this by ensuring that both fst_tx_task and fst_int_task are properly canceled before the fst_card_info is released. Add tasklet_kill() in fst_remove_one() to synchronize with any pending or running tasklets. Since unregister_hdlc_device() stops data transmission and reception, and fst_disable_intr() prevents further interrupts, it is appropriate to place tasklet_kill() after these calls. The bugs were identified through static analysis. To reproduce the issue and validate the fix, a FarSync T-series card was simulated in QEMU and delays(e.g., mdelay()) were introduced within the tasklet handler to increase the likelihood of triggering the race condition. Fixes: 2f623aaf9f31 ("net: farsync: Fix kmemleak when rmmods farsync") Signed-off-by: Duoming Zhou Reviewed-by: Jijie Shao Link: https://patch.msgid.link/20260219124637.72578-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close()

2023-10-10T20:00:40+00:00

[ Upstream commit a59addacf899b1b21a7b7449a1c52c98704c2472 ] Process the result of hdlc_open() and call uhdlc_close() in case of an error. It is necessary to pass the error code up the control flow, similar to a possible error in request_irq(). Also add a hdlc_close() call to the uhdlc_close() because the comment to hdlc_close() says it must be called by the hardware driver when the HDLC device is being closed Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by: Alexandra Diupina Reviewed-by: Christophe Leroy Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: lapbether: only support ethernet devices

2023-06-21T14:01:02+00:00

[ Upstream commit 9eed321cde22fc1afd76eac563ce19d899e0d6b2 ] It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Martin Schiller Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: wan: Add checks for NULL for utdm in undo_uhdlc_init and unmap_si_regs

2023-02-01T07:34:17+00:00

[ Upstream commit 488e0bf7f34af3d42d1d5e56f7a5a7beaff188a3 ] If uhdlc_priv_tsa != 1 then utdm is not initialized. And if ret != NULL then goto undo_uhdlc_init, where utdm is dereferenced. Same if dev == NULL. Found by Astra Linux on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8d68100ab4ad ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm") Signed-off-by: Esina Ekaterina Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ru Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: farsync: Fix kmemleak when rmmods farsync

2022-12-31T12:32:26+00:00

[ Upstream commit 2f623aaf9f31de968dea6169849706a2f9be444c ] There are two memory leaks reported by kmemleak: unreferenced object 0xffff888114b20200 (size 128): comm "modprobe", pid 4846, jiffies 4295146524 (age 401.345s) hex dump (first 32 bytes): e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff .bW......bW..... 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmalloc_trace+0x22/0x60 [] __hw_addr_add_ex+0x198/0x6c0 [] dev_addr_init+0x13d/0x230 [] alloc_netdev_mqs+0x10d/0xe50 [] alloc_hdlcdev+0x2e/0x80 [] fst_add_one+0x601/0x10e0 [farsync] ... unreferenced object 0xffff88810b85b000 (size 1024): comm "modprobe", pid 4846, jiffies 4295146523 (age 401.346s) hex dump (first 32 bytes): 00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff .........p...... 00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00 ................ backtrace: [] kmalloc_trace+0x22/0x60 [] fst_add_one+0x154/0x10e0 [farsync] [] local_pci_probe+0xd3/0x170 ... The root cause is traced to the netdev and fst_card_info are not freed when removes one fst in fst_remove_one(), which may trigger oom if repeated insmod and rmmod module. Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as the operations on the error handling path in fst_add_one(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Li Zetao Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: lapbether: fix issue of invalid opcode in lapbeth_open()

2022-11-08T11:47:36+00:00

If lapb_register() failed when lapb device goes to up for the first time, the NAPI is not disabled. As a result, the invalid opcode issue is reported when the lapb device goes to up for the second time. The stack info is as follows: [ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442! [ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0 [ 1958.332310][T11356] Call Trace: [ 1958.332817][T11356] [ 1958.336135][T11356] lapbeth_open+0x18/0x90 [ 1958.337446][T11356] __dev_open+0x258/0x490 [ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0 [ 1958.345325][T11356] dev_change_flags+0x93/0x160 [ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0 [ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0 [ 1958.349638][T11356] sock_ioctl+0x5d1/0x750 [ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790 [ 1958.365594][T11356] do_syscall_64+0x35/0x80 [ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1958.377381][T11356] Fixes: 514e1150da9c ("net: x25: Queue received packets in the drivers instead of per-CPU queues") Signed-off-by: Zhengchao Shao Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni

net: lapbether: fix issue of dev reference count leakage in lapbeth_device_event()

2022-11-07T09:31:26+00:00

When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, lapbeth_device_event() receives the message and creates a new lapbeth device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, lapbeth_device_event() will not put the dev reference count. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao Signed-off-by: David S. Miller

WAN: Fix syntax errors in comments

2022-06-07T08:45:25+00:00

Delete the redundant word 'the'. Signed-off-by: Xiang wangx Link: https://lore.kernel.org/r/20220604040917.8926-1-wangxiang@cdjrlc.com Signed-off-by: Paolo Abeni

net: wan: switch to netif_napi_add_weight()

2022-05-08T10:33:57+00:00

A handful of WAN drivers use custom napi weights, switch them to the new API. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller