kernel/linux.git/drivers/net/wan/Kconfig, branch v5.10.264

wan: ds26522: select CONFIG_BITREVERSE

2021-01-17T13:17:04+00:00

commit 69931e11288520c250152180ecf9b6ac5e6e40ed upstream. Without this, the driver runs into a link failure arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe': slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write': slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table' Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

docs: networking: convert framerelay.txt to ReST

2020-04-28T21:39:46+00:00

- add SPDX header; - add a document title; - adjust identation, whitespaces and blank lines; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: David S. Miller

net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware

2020-03-29T13:37:53+00:00

As far as I understood from the Kconfig help text, this build rule is used to rebuild the driver firmware, which runs on an old m68k-based chip. So, you need m68k tools for the firmware rebuild. wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI. So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other words, ifeq ($(ARCH),m68k) is false here. I am keeping the dead code for now, but rebuilding the firmware requires 'as68k' and 'ld68k', which I do not have in hand. Instead, the kernel.org m68k GCC [1] successfully built it. Allowing a user to pass in CROSS_COMPILE_M68K= is handier. [1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz Suggested-by: Geert Uytterhoeven Signed-off-by: Masahiro Yamada

wan: ixp4xx_hss: prepare compile testing

2020-01-12T20:59:52+00:00

The ixp4xx_hss driver needs the platform data definition and the system clock rate to be compiled. Move both into a new platform_data header file. This is a prerequisite for compile testing, but turning on compile testing requires further patches to isolate the SoC headers. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij Signed-off-by: Jakub Kicinski

net/wan: dscc4: remove broken dscc4 driver

2019-09-16T07:14:41+00:00

Using static analysis, I discovered that the "dpriv->pci_priv->pdev" pointer is always NULL. This pointer was supposed to be initialized during probe and is essential for the driver to work. It would be easy to add a "ppriv->pdev = pdev;" to dscc4_found1() but this driver has been broken since before we started using git and no one has complained so probably we should just remove it. Signed-off-by: Dan Carpenter Acked-by: Francois Romieu Signed-off-by: David S. Miller

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: wan: slic_ds26522: Allow driver to built if COMPILE_TEST is enabled

2016-10-14T14:11:49+00:00

The driver only has runtime but no build time dependency with FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE. So it can be built for testing purposes if the COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that the driver is not affected by changes that could cause build regressions. Signed-off-by: Javier Martinez Canillas Signed-off-by: David S. Miller

Maxim/driver: Add driver for maxim ds26522

2016-06-29T08:05:14+00:00

Signed-off-by: Zhao Qiang Signed-off-by: David S. Miller

drivers/net: support hdlc function for QE-UCC

2016-06-07T22:56:31+00:00

The driver add hdlc support for Freescale QUICC Engine. It support NMSI and TSA mode. Signed-off-by: Zhao Qiang Signed-off-by: David S. Miller