kernel/linux.git/drivers/net/vxlan, branch v6.1.124

vxlan: Handle error of rtnl_register_module().

2024-10-17T13:22:23+00:00

[ Upstream commit 78b7b991838a4a6baeaad934addc4db2c5917eb8 ] Since introduced, vxlan_vnifilter_init() has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Signed-off-by: Kuniyuki Iwashima Reviewed-by: Nikolay Aleksandrov Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

vxlan: Fix regression when dropping packets due to invalid src addresses

2024-06-21T12:35:34+00:00

[ Upstream commit 1cd4bc987abb2823836cbb8f887026011ccddc8a ] Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c1e5b9 for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") Signed-off-by: Daniel Borkmann Cc: David Bauer Cc: Ido Schimmel Cc: Nikolay Aleksandrov Cc: Martin KaFai Lau Reviewed-by: Ido Schimmel Reviewed-by: Nikolay Aleksandrov Reviewed-by: David Bauer Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vxlan: Fix regression when dropping packets due to invalid src addresses

2024-06-16T11:41:32+00:00

commit 1cd4bc987abb2823836cbb8f887026011ccddc8a upstream. Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c1e5b9 for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") Signed-off-by: Daniel Borkmann Cc: David Bauer Cc: Ido Schimmel Cc: Nikolay Aleksandrov Cc: Martin KaFai Lau Reviewed-by: Ido Schimmel Reviewed-by: Nikolay Aleksandrov Reviewed-by: David Bauer Signed-off-by: David S. Miller [ Backport note: vxlan snooping/learning not supported in 6.8 or older, so commit is simply a revert. ] Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman

vxlan: Pull inner IP header in vxlan_rcv().

2024-05-17T09:56:01+00:00

[ Upstream commit f7789419137b18e3847d0cc41afd788c3c00663d ] Ensure the inner IP header is part of skb's linear data before reading its ECN bits. Otherwise we might read garbage. One symptom is the system erroneously logging errors like "vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx". Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see commit 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") for example). So let's reuse the same code structure for consistency. Maybe we'll can add a common helper in the future. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault Reviewed-by: Ido Schimmel Reviewed-by: Eric Dumazet Reviewed-by: Nikolay Aleksandrov Reviewed-by: Sabrina Dubroca Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

vxlan: drop packets from invalid src-address

2024-05-02T14:29:23+00:00

[ Upstream commit f58f45c1e5b92975e91754f5407250085a6ae7cf ] The VXLAN driver currently does not check if the inner layer2 source-address is valid. In case source-address snooping/learning is enabled, a entry in the FDB for the invalid address is created with the layer3 address of the tunnel endpoint. If the frame happens to have a non-unicast address set, all this non-unicast traffic is subsequently not flooded to the tunnel network but sent to the learnt host in the FDB. To make matters worse, this FDB entry does not expire. Apply the same filtering for packets as it is done for bridges. This not only drops these invalid packets but avoids them from being learnt into the FDB. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Suggested-by: Ido Schimmel Signed-off-by: David Bauer Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

neighbour: annotate lockless accesses to n->nud_state

2023-10-10T20:00:42+00:00

[ Upstream commit b071af523579df7341cabf0f16fc661125e9a13f ] We have many lockless accesses to n->nud_state. Before adding another one in the following patch, add annotations to readers and writers. Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Reviewed-by: Martin KaFai Lau Signed-off-by: Jakub Kicinski Stable-dep-of: 5baa0433a15e ("neighbour: fix data-races around n->output") Signed-off-by: Sasha Levin

drivers: vxlan: vnifilter: free percpu vni stats on error path

2023-08-16T16:27:27+00:00

commit b1c936e9af5dd08636d568736fc6075ed9d1d529 upstream. In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the allocated percpu vni stats are not freed on the error path. Introduce vxlan_vni_free() which would work as a nice wrapper to free vxlan_vni_node resources properly. Found by Linux Verification Center (linuxtesting.org). Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats") Suggested-by: Ido Schimmel Signed-off-by: Fedor Pchelkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vxlan: fix GRO with VXLAN-GPE

2023-08-03T08:23:59+00:00

[ Upstream commit b0b672c4d0957e5897685667fc848132b8bd2d71 ] In VXLAN-GPE, there may not be an Ethernet header following the VXLAN header. But in GRO, the vxlan driver calls eth_gro_receive unconditionally, which means the following header is incorrectly parsed as Ethernet. Introduce GPE specific GRO handling. For better performance, do not check for GPE during GRO but rather install a different set of functions at setup time. Fixes: e1e5314de08ba ("vxlan: implement GPE") Reported-by: Paolo Abeni Signed-off-by: Jiri Benc Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vxlan: generalize vxlan_parse_gpe_hdr and remove unused args

2023-08-03T08:23:59+00:00

[ Upstream commit 17a0a64448b568442a101de09575f81ffdc45d15 ] The vxlan_parse_gpe_hdr function extracts the next protocol value from the GPE header and marks GPE bits as parsed. In order to be used in the next patch, split the function into protocol extraction and bit marking. The bit marking is meaningful only in vxlan_rcv; move it directly there. Rename the function to vxlan_parse_gpe_proto to reflect what it now does. Remove unused arguments skb and vxflags. Move the function earlier in the file to allow it to be called from more places in the next patch. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller Stable-dep-of: b0b672c4d095 ("vxlan: fix GRO with VXLAN-GPE") Signed-off-by: Sasha Levin

vxlan: calculate correct header length for GPE

2023-08-03T08:23:59+00:00

[ Upstream commit 94d166c5318c6edd1e079df8552233443e909c33 ] VXLAN-GPE does not add an extra inner Ethernet header. Take that into account when calculating header length. This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is cached. In the collect_md mode (which is the only mode that VXLAN-GPE supports), there's no magic auto-setting of the tunnel interface MTU. It can't be, since the destination and thus the underlying interface may be different for each packet. So, the administrator is responsible for setting the correct tunnel interface MTU. Apparently, the administrators are capable enough to calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36). They set the tunnel interface MTU to 1464. If you run a TCP stream over such interface, it's then segmented according to the MTU 1464, i.e. producing 1514 bytes frames. Which is okay, this still fits the lower MTU. However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as the header size and thus incorrectly calculates the frame size to be 1528. This leads to ICMP too big message being generated (locally), PMTU of 1450 to be cached and the TCP stream to be resegmented. The fix is to use the correct actual header size, especially for skb_tunnel_check_pmtu calculation. Fixes: e1e5314de08ba ("vxlan: implement GPE") Signed-off-by: Jiri Benc Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin