kernel/linux.git/drivers/net/usb, branch v6.18.34

net: usb: rtl8150: free skb on usb_submit_urb() failure in xmit

2026-05-23T11:07:09+00:00

[ Upstream commit adbe2cdf75461891e50dbe11896ac78e9af1f874 ] When rtl8150_start_xmit() fails to submit the tx URB, the URB is never handed to the USB core and write_bulk_callback() will not run. The driver returns NETDEV_TX_OK, which tells the networking stack that the skb has been consumed, but nothing actually frees the skb on this error path: dev->tx_skb = skb; ... if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) { ... /* no kfree_skb here */ } return NETDEV_TX_OK; This leaks the skb on every submit failure and also leaves dev->tx_skb pointing at memory that the driver itself may later free, which is fragile. Free the skb with dev_kfree_skb_any() in the error path and clear dev->tx_skb so no stale pointer is left behind. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Andrew Lunn Signed-off-by: Morduan Zang Link: https://patch.msgid.link/E7D3E1C013C5A859+20260424015517.9574-1-zhangdandan@uniontech.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit()

2026-05-23T11:07:09+00:00

[ Upstream commit 23f0e34c64acba15cad4d23e50f41f533da195fa ] syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit() when accessing skb->len for tx statistics after usb_submit_urb() has been called: BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760 drivers/net/usb/rtl8150.c:712 Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226 The URB completion handler write_bulk_callback() frees the skb via dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU in softirq context before usb_submit_urb() returns in the submitter, so by the time the submitter reads skb->len the skb has already been queued to the per-CPU completion_queue and freed by net_tx_action(): CPU A (xmit) CPU B (USB completion softirq) ------------ ------------------------------ dev->tx_skb = skb; usb_submit_urb() --+ |-------> write_bulk_callback() | dev_kfree_skb_irq(dev->tx_skb) | net_tx_action() | napi_skb_cache_put() <-- free netdev->stats.tx_bytes | += skb->len; <-- UAF read Fix it by caching skb->len before submitting the URB and using the cached value when updating the tx_bytes counter. The pre-existing tx_bytes semantics are preserved: the counter tracks the original frame length (skb->len), not the ETH_ZLEN/USB-alignment padded "count" value that is handed to the device. Changing that would be a user-visible accounting change and is out of scope for this UAF fix. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+3f46c095ac0ca048cb71@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/69e69ee7.050a0220.24bfd3.002b.GAE@google.com/ Closes: https://syzkaller.appspot.com/bug?extid=3f46c095ac0ca048cb71 Reviewed-by: Andrew Lunn Signed-off-by: Zhan Jun Link: https://patch.msgid.link/809895186B866C10+20260423004913.136655-1-zhangdandan@uniontech.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

r8152: fix incorrect register write to USB_UPHY_XTAL

2026-05-23T11:06:29+00:00

[ Upstream commit 48afd5124fd6129c46fd12cb06155384b1c4a0c4 ] The old code used ocp_write_byte() to clear the OOBS_POLLING bit (BIT(8)) in the USB_UPHY_XTAL register, but this doesn't correctly clear a bit in the upper byte of the 16-bit register. Fix this by using ocp_write_word() instead. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Chih Kai Hsu Reviewed-by: Hayes Wang Link: https://patch.msgid.link/20260326073925.32976-454-nic_swsd@realtek.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()

2026-04-22T11:22:25+00:00

commit 600dc40554dc5ad1e6f3af51f700228033f43ea7 upstream. A malicious USB device claiming to be a CDC Phonet modem can overflow the skb_shared_info->frags[] array by sending an unbounded sequence of full-page bulk transfers. Drop the skb and increment the length error when the frag limit is reached. This matches the same fix that commit f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") did for the t7xx driver. Cc: Andrew Lunn Cc: "David S. Miller" Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: stable Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026041134-dreamboat-buddhism-d1ec@gregkh Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver") Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net: usb: r8152: add TRENDnet TUC-ET2G

2026-04-02T11:22:57+00:00

[ Upstream commit 15fba71533bcdfaa8eeba69a5a5a2927afdf664a ] The TRENDnet TUC-ET2G is a RTL8156 based usb ethernet adapter. Add its vendor and product IDs. Signed-off-by: Valentin Spreckels Link: https://patch.msgid.link/20260226195409.7891-2-valentin@spreckels.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: usb: aqc111: Do not perform PM inside suspend callback

2026-03-25T10:10:41+00:00

[ Upstream commit 069c8f5aebe4d5224cf62acc7d4b3486091c658a ] syzbot reports "task hung in rpm_resume" This is caused by aqc111_suspend calling the PM variant of its write_cmd routine. The simplified call trace looks like this: rpm_suspend() usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING aqc111_suspend() - called for the usb device interface aqc111_write32_cmd() usb_autopm_get_interface() pm_runtime_resume_and_get() rpm_resume() - here we call rpm_resume() on our parent rpm_resume() - Here we wait for a status change that will never happen. At this point we block another task which holds rtnl_lock and locks up the whole networking stack. Fix this by replacing the write_cmd calls with their _nopm variants Reported-by: syzbot+48dc1e8dfc92faf1124c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=48dc1e8dfc92faf1124c Fixes: e58ba4544c77 ("net: usb: aqc111: Add support for wake on LAN by MAGIC packet") Signed-off-by: Nikola Z. Ivanov Link: https://patch.msgid.link/20260313141643.1181386-1-zlatistiv@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check

2026-03-25T10:10:41+00:00

[ Upstream commit 77914255155e68a20aa41175edeecf8121dac391 ] The same bounds-check bug fixed for NDP16 in the previous patch also exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated against the total skb length without accounting for ndpoffset, allowing out-of-bounds reads when the NDP32 is placed near the end of the NTB. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. Compile-tested only. Fixes: 0fa81b304a79 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block") Signed-off-by: Tobi Gaertner Link: https://patch.msgid.link/20260314054640.2895026-3-tob.gaertner@me.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check

2026-03-25T10:10:41+00:00

[ Upstream commit 2aa8a4fa8d5b7d0e1ebcec100e1a4d80a1f4b21a ] cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE entries fit within the skb. The first check correctly accounts for ndpoffset: if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len) but the second check omits it: if ((sizeof(struct usb_cdc_ncm_ndp16) + ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len) This validates the DPE array size against the total skb length as if the NDP were at offset 0, rather than at ndpoffset. When the NDP is placed near the end of the NTB (large wNdpIndex), the DPE entries can extend past the skb data buffer even though the check passes. cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating the DPE array. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. Fixes: ff06ab13a4cc ("net: cdc_ncm: splitting rx_fixup for code reuse") Signed-off-by: Tobi Gaertner Link: https://patch.msgid.link/20260314054640.2895026-2-tob.gaertner@me.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

qmi_wwan: allow max_mtu above hard_mtu to control rx_urb_size

2026-03-19T15:08:42+00:00

commit 55f854dd5bdd8e19b936a00ef1f8d776ac32c7b0 upstream. Commit c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu") capped net->max_mtu to the device's hard_mtu in usbnet_probe(). While this correctly prevents oversized packets on standard USB network devices, it breaks the qmi_wwan driver. qmi_wwan relies on userspace (e.g. ModemManager) setting a large MTU on the wwan0 interface to configure rx_urb_size via usbnet_change_mtu(). QMI modems negotiate USB transfer sizes of 16,383 or 32,767 bytes, and the USB receive buffers must be sized accordingly. With max_mtu capped to hard_mtu (~1500 bytes), userspace can no longer raise the MTU, the receive buffers remain small, and download speeds drop from >300 Mbps to ~0.8 Mbps. Introduce a FLAG_NOMAXMTU driver flag that allows individual usbnet drivers to opt out of the max_mtu cap. Set this flag in qmi_wwan's driver_info structures to restore the previous behavior for QMI devices, while keeping the safety fix in place for all other usbnet drivers. Fixes: c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/CAPh3n803k8JcBPV5qEzUB-oKzWkAs-D5CU7z=Vd_nLRCr5ZqQg@mail.gmail.com/ Reported-by: Koen Vandeputte Tested-by: Daniele Palmas Signed-off-by: Laurent Vivier Link: https://patch.msgid.link/20260304134338.1785002-1-lvivier@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: usb: lan78xx: skip LTM configuration for LAN7850

2026-03-19T15:08:23+00:00

commit d9cc0e440f0664f6f3e2c26e39ab9dd5f3badba7 upstream. Do not configure Latency Tolerance Messaging (LTM) on USB 2.0 hardware. The LAN7850 is a High-Speed (USB 2.0) only device and does not support SuperSpeed features like LTM. Currently, the driver unconditionally attempts to configure LTM registers during initialization. On the LAN7850, these registers do not exist, resulting in writes to invalid or undocumented memory space. This issue was identified during a port to the regmap API with strict register validation enabled. While no functional issues or crashes have been observed from these invalid writes, bypassing LTM initialization on the LAN7850 ensures the driver strictly adheres to the hardware's valid register map. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel Link: https://patch.msgid.link/20260305143429.530909-4-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman