Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v6.1.2 2022-11-23T13:46:42+00:00 2022-11-23T13:46:42+00:00 Santiago Ruano Rincón santiago.ruano-rincon@imt-atlantique.fr 2022-11-21T20:53:05+00:00 urn:sha1:748064b54c99418f615aabff5755996cd9816969 ZLP for DisplayLink ethernet devices was enabled in 6.0: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices"). The related driver_info should be the "same as cdc_ncm_info, but with FLAG_SEND_ZLP". However, set_rx_mode that enables handling multicast traffic was missing in the new cdc_ncm_zlp_info. usbnet_cdc_update_filter rx mode was introduced in linux 5.9 with: e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast traffic") Without this hook, multicast, and then IPv6 SLAAC, is broken. Fixes: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices") Signed-off-by: Santiago Ruano Rincón <santiago.ruano-rincon@imt-atlantique.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 2022-11-23T12:47:54+00:00 Davide Tronchin davide.tronchin.94@gmail.com 2022-11-21T12:54:55+00:00 urn:sha1:a487069e11b6527373f7c6f435d8998051d0b5d9 Add RmNet support for LARA-L6. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In RmNet mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 2022-11-17T09:38:37+00:00 Alexandru Tachici alexandru.tachici@analog.com 2022-11-15T11:44:34+00:00 urn:sha1:809ff97a677ff85dfb7ce2b63be261d1633dcf29 An external PHY needs settling time after power up or reset. In the bind() function an mdio bus is registered. If at this point the external PHY is still initialising, no valid PHY ID will be read and on phy_find_first() the bind() function will fail. If an external PHY is present, wait the maximum time specified in 802.3 45.2.7.1.1. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 2022-11-17T09:13:40+00:00 Enrico Sau enrico.sau@gmail.com 2022-11-15T10:58:59+00:00 urn:sha1:e103ba33998d0f25653cc8ebe745b68d1ee10cda Add the following Telit LE910C4-WWX composition: 0x103a: rmnet Signed-off-by: Enrico Sau <enrico.sau@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 2022-10-07T23:36:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-10-07T23:36:24+00:00 urn:sha1:6181073dd6a7e5deafc60e7981bd765b6c93da8c Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ... 2022-10-04T00:44:18+00:00 Jakub Kicinski kuba@kernel.org 2022-10-04T00:44:18+00:00 urn:sha1:e52f7c1ddf3e47243c330923ea764e7ccfbe99f7 Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2022-10-03T23:48:31+00:00 Andrew Gaul gaul@gaul.org 2022-10-02T03:41:28+00:00 urn:sha1:93e2be344a7db169b7119de21ac1bf253b8c6907 My system shows almost 10 million of these messages over a 24-hour period which pollutes my logs. Signed-off-by: Andrew Gaul <gaul@google.com> Link: https://lore.kernel.org/r/20221002034128.2026653-1-gaul@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2022-09-29T21:30:51+00:00 Jakub Kicinski kuba@kernel.org 2022-09-29T21:30:51+00:00 urn:sha1:accc3b4a572bba903a801a393532272727f83f5b No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2022-09-29T01:57:14+00:00 Jakub Kicinski kuba@kernel.org 2022-09-27T13:27:53+00:00 urn:sha1:b48b89f9c189d24eb5e2b4a0ac067da5a24ee86d We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2022-09-27T14:32:11+00:00 Frank Wunderlich frank-w@public-files.de 2022-09-26T15:07:40+00:00 urn:sha1:797666cd5af041ffb66642fff62f7389f08566a2 Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Cc: stable@vger.kernel.org Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220926150740.6684-3-linux@fw-web.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>