kernel/linux.git/drivers/net/usb, branch v5.9.12

net: usb: qmi_wwan: Set DTR quirk for MR400

2020-11-24T12:38:52+00:00

[ Upstream commit df8d85d8c69d6837817e54dcb73c84a8b5a13877 ] LTE module MR400 embedded in TL-MR6400 v4 requires DTR to be set. Signed-off-by: Filip Moc Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/20201117173631.GA550981@moc6.cz Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: usb: qmi_wwan: add Telit LE910Cx 0x1230 composition

2020-11-10T11:38:57+00:00

[ Upstream commit 5fd8477ed8ca77e64b93d44a6dae4aa70c191396 ] Add support for Telit LE910Cx 0x1230 composition: 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/20201102110108.17244-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: usb: qmi_wwan: add Cellient MPL200 card

2020-10-08T19:26:31+00:00

Add usb ids of the Cellient MPL200 card. Signed-off-by: Wilken Gottwalt Acked-by: Bjørn Mork Signed-off-by: Jakub Kicinski

net: usb: rtl8150: set random MAC address when set_ethernet_addr() fails

2020-10-06T13:10:21+00:00

When get_registers() fails in set_ethernet_addr(),the uninitialized value of node_id gets copied over as the address. So, check the return value of get_registers(). If get_registers() executed successfully (i.e., it returns sizeof(node_id)), copy over the MAC address using ether_addr_copy() (instead of using memcpy()). Else, if get_registers() failed instead, a randomly generated MAC address is set as the MAC address instead. Reported-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Tested-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Acked-by: Petko Manolov Signed-off-by: Anant Thazhemadam Signed-off-by: David S. Miller

net: usb: pegasus: Proper error handing when setting pegasus' MAC address

2020-10-02T22:18:42+00:00

v2: If reading the MAC address from eeprom fail don't throw an error, use randomly generated MAC instead. Either way the adapter will soldier on and the return type of set_ethernet_addr() can be reverted to void. v1: Fix a bug in set_ethernet_addr() which does not take into account possible errors (or partial reads) returned by its helpers. This can potentially lead to writing random data into device's MAC address registers. Signed-off-by: Petko Manolov Signed-off-by: David S. Miller

net: usb: ax88179_178a: add MCT usb 3.0 adapter

2020-09-29T01:39:05+00:00

Adds the driver_info and usb ids of the AX88179 based MCT U3-A9003 USB 3.0 ethernet adapter. Signed-off-by: Wilken Gottwalt Signed-off-by: David S. Miller

net: usb: ax88179_178a: fix missing stop entry in driver_info

2020-09-29T01:37:28+00:00

Adds the missing .stop entry in the Belkin driver_info structure. Fixes: e20bd60bf62a ("net: usb: asix88179_178a: Add support for the Belkin B2B128") Signed-off-by: Wilken Gottwalt Signed-off-by: David S. Miller

net: usb: ax88179_178a: add Toshiba usb 3.0 adapter

2020-09-26T00:07:25+00:00

Adds the driver_info and usb ids of the AX88179 based Toshiba USB 3.0 ethernet adapter. Signed-off-by: Wilken Gottwalt Signed-off-by: David S. Miller

rndis_host: increase sleep time in the query-response loop

2020-09-14T21:39:59+00:00

Some WinCE devices face connectivity issues via the NDIS interface. They fail to register, resulting in -110 timeout errors and failures during the probe procedure. In this kind of WinCE devices, the Windows-side ndis driver needs quite more time to be loaded and configured, so that the linux rndis host queries to them fail to be responded correctly on time. More specifically, when INIT is called on the WinCE side - no other requests can be served by the Client and this results in a failed QUERY afterwards. The increase of the waiting time on the side of the linux rndis host in the command-response loop leaves the INIT process to complete and respond to a QUERY, which comes afterwards. The WinCE devices with this special "feature" in their ndis driver are satisfied by this fix. Signed-off-by: Olympia Giannou Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-09-04T01:50:48+00:00

Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...