kernel/linux.git/drivers/net/usb, branch v4.14.2

net: cdc_ncm: GetNtbFormat endian fix

2017-11-24T07:37:03+00:00

[ Upstream commit 6314dab4b8fb8493d810e175cb340376052c69b6 ] The GetNtbFormat and SetNtbFormat requests operate on 16 bit little endian values. We get away with ignoring this most of the time, because we only care about USB_CDC_NCM_NTB16_FORMAT which is 0x0000. This fails for USB_CDC_NCM_NTB32_FORMAT. Fix comparison between LE value from device and constant by converting the constant to LE. Reported-by: Ben Hutchings Fixes: 2b02c20ce0c2 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Cc: Enrico Mioso Cc: Christian Panton Signed-off-by: Bjørn Mork Acked-By: Enrico Mioso Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: usb: asix: fill null-ptr-deref in asix_suspend

2017-11-09T00:22:13+00:00

When asix_suspend() is called dev->driver_priv might not have been assigned a value, so we need to check that it's not NULL. Similar issue is present in asix_resume(), this patch fixes it as well. Found by syzkaller. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc4-43422-geccacdd69a8c #400 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bb36300 task.stack: ffff88006bba8000 RIP: 0010:asix_suspend+0x76/0xc0 drivers/net/usb/asix_devices.c:629 RSP: 0018:ffff88006bbae718 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff880061ba3b80 RCX: 1ffff1000c34d644 RDX: 0000000000000001 RSI: 0000000000000402 RDI: 0000000000000008 RBP: ffff88006bbae738 R08: 1ffff1000d775cad R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800630a8b40 R13: 0000000000000000 R14: 0000000000000402 R15: ffff880061ba3b80 FS: 0000000000000000(0000) GS:ffff88006c600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff33cf89000 CR3: 0000000061c0a000 CR4: 00000000000006f0 Call Trace: usb_suspend_interface drivers/usb/core/driver.c:1209 usb_suspend_both+0x27f/0x7e0 drivers/usb/core/driver.c:1314 usb_runtime_suspend+0x41/0x120 drivers/usb/core/driver.c:1852 __rpm_callback+0x339/0xb60 drivers/base/power/runtime.c:334 rpm_callback+0x106/0x220 drivers/base/power/runtime.c:461 rpm_suspend+0x465/0x1980 drivers/base/power/runtime.c:596 __pm_runtime_suspend+0x11e/0x230 drivers/base/power/runtime.c:1009 pm_runtime_put_sync_autosuspend ./include/linux/pm_runtime.h:251 usb_new_device+0xa37/0x1020 drivers/usb/core/hub.c:2487 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: 8d 7c 24 20 48 89 fa 48 c1 ea 03 80 3c 02 00 75 5b 48 b8 00 00 00 00 00 fc ff df 4d 8b 6c 24 20 49 8d 7d 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 34 4d 8b 6d 08 4d 85 ed 74 0b e8 26 2b 51 fd 4c RIP: asix_suspend+0x76/0xc0 RSP: ffff88006bbae718 ---[ end trace dfc4f5649284342c ]--- Signed-off-by: Andrey Konovalov Signed-off-by: David S. Miller

Revert "net: usb: asix: fill null-ptr-deref in asix_suspend"

2017-11-09T00:21:44+00:00

This reverts commit baedf68a068ca29624f241426843635920f16e1d. There is an updated version of this fix which covers the problem more thoroughly. Signed-off-by: David S. Miller

qmi_wwan: Add missing skb_reset_mac_header-call

2017-11-08T07:10:30+00:00

When we receive a packet on a QMI device in raw IP mode, we should call skb_reset_mac_header() to ensure that skb->mac_header contains a valid offset in the packet. While it shouldn't really matter, the packets have no MAC header and the interface is configured as-such, it seems certain parts of the network stack expects a "good" value in skb->mac_header. Without the skb_reset_mac_header() call added in this patch, for example shaping traffic (using tc) triggers the following oops on the first received packet: [ 303.642957] skbuff: skb_under_panic: text:8f137918 len:177 put:67 head:8e4b0f00 data:8e4b0eff tail:0x8e4b0fb0 end:0x8e4b1520 dev:wwan0 [ 303.655045] Kernel bug detected[#1]: [ 303.658622] CPU: 1 PID: 1002 Comm: logd Not tainted 4.9.58 #0 [ 303.664339] task: 8fdf05e0 task.stack: 8f15c000 [ 303.668844] $ 0 : 00000000 00000001 0000007a 00000000 [ 303.674062] $ 4 : 8149a2fc 8149a2fc 8149ce20 00000000 [ 303.679284] $ 8 : 00000030 3878303a 31623465 20303235 [ 303.684510] $12 : ded731e3 2626a277 00000000 03bd0000 [ 303.689747] $16 : 8ef62b40 00000043 8f137918 804db5fc [ 303.694978] $20 : 00000001 00000004 8fc13800 00000003 [ 303.700215] $24 : 00000001 8024ab10 [ 303.705442] $28 : 8f15c000 8fc19cf0 00000043 802cc920 [ 303.710664] Hi : 00000000 [ 303.713533] Lo : 74e58000 [ 303.716436] epc : 802cc920 skb_panic+0x58/0x5c [ 303.721046] ra : 802cc920 skb_panic+0x58/0x5c [ 303.725639] Status: 11007c03 KERNEL EXL IE [ 303.729823] Cause : 50800024 (ExcCode 09) [ 303.733817] PrId : 0001992f (MIPS 1004Kc) [ 303.737892] Modules linked in: rt2800pci rt2800mmio rt2800lib qcserial ppp_async option usb_wwan rt2x00pci rt2x00mmio rt2x00lib rndis_host qmi_wwan ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2i Process logd (pid: 1002, threadinfo=8f15c000, task=8fdf05e0, tls=77b3eee4) [ 303.962509] Stack : 00000000 80408990 8f137918 000000b1 00000043 8e4b0f00 8e4b0eff 8e4b0fb0 [ 303.970871] 8e4b1520 8fec1800 00000043 802cd2a4 6e000045 00000043 00000000 8ef62000 [ 303.979219] 8eef5d00 8ef62b40 8fea7300 8f137918 00000000 00000000 0002bb01 793e5664 [ 303.987568] 8ef08884 00000001 8fea7300 00000002 8fc19e80 8eef5d00 00000006 00000003 [ 303.995934] 00000000 8030ba90 00000003 77ab3fd0 8149dc80 8004d1bc 8f15c000 8f383700 [ 304.004324] ... [ 304.006767] Call Trace: [ 304.009241] [<802cc920>] skb_panic+0x58/0x5c [ 304.013504] [<802cd2a4>] skb_push+0x78/0x90 [ 304.017783] [<8f137918>] 0x8f137918 [ 304.021269] Code: 00602825 0c02a3b4 24842888 <000c000d> 8c870060 8c8200a0 0007382b 00070336 8c88005c [ 304.031034] [ 304.032805] ---[ end trace b778c482b3f0bda9 ]--- [ 304.041384] Kernel panic - not syncing: Fatal exception in interrupt [ 304.051975] Rebooting in 3 seconds.. While the oops is for a 4.9-kernel, I was able to trigger the same oops with net-next as of yesterday. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Signed-off-by: Kristian Evensen Acked-by: Bjørn Mork Signed-off-by: David S. Miller

net: qmi_wwan: fix divide by 0 on bad descriptors

2017-11-08T04:42:43+00:00

A CDC Ethernet functional descriptor with wMaxSegmentSize = 0 will cause a divide error in usbnet_probe: divide error: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc8-44453-g1fdc1a82c34f #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bef5c00 task.stack: ffff88006bf60000 RIP: 0010:usbnet_update_max_qlen+0x24d/0x390 drivers/net/usb/usbnet.c:355 RSP: 0018:ffff88006bf67508 EFLAGS: 00010246 RAX: 00000000000163c8 RBX: ffff8800621fce40 RCX: ffff8800621fcf34 RDX: 0000000000000000 RSI: ffffffff837ecb7a RDI: ffff8800621fcf34 RBP: ffff88006bf67520 R08: ffff88006bef5c00 R09: ffffed000c43f881 R10: ffffed000c43f880 R11: ffff8800621fc406 R12: 0000000000000003 R13: ffffffff85c71de0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe9c0d6dac CR3: 00000000614f4000 CR4: 00000000000006f0 Call Trace: usbnet_probe+0x18b5/0x2790 drivers/net/usb/usbnet.c:1783 qmi_wwan_probe+0x133/0x220 drivers/net/usb/qmi_wwan.c:1338 usb_probe_interface+0x324/0x940 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x522/0x740 drivers/base/dd.c:557 Fix by simply ignoring the bogus descriptor, as it is optional for QMI devices anyway. Fixes: 423ce8caab7e ("net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices") Reported-by: Andrey Konovalov Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

net: cdc_ether: fix divide by 0 on bad descriptors

2017-11-08T04:42:01+00:00

Setting dev->hard_mtu to 0 will cause a divide error in usbnet_probe. Protect against devices with bogus CDC Ethernet functional descriptors by ignoring a zero wMaxSegmentSize. Signed-off-by: Bjørn Mork Acked-by: Oliver Neukum Signed-off-by: David S. Miller

net: usb: asix: fill null-ptr-deref in asix_suspend

2017-11-04T13:42:09+00:00

When asix_suspend() is called dev->driver_priv might not have been assigned a value, so we need to check that it's not NULL. Found by syzkaller. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc4-43422-geccacdd69a8c #400 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bb36300 task.stack: ffff88006bba8000 RIP: 0010:asix_suspend+0x76/0xc0 drivers/net/usb/asix_devices.c:629 RSP: 0018:ffff88006bbae718 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff880061ba3b80 RCX: 1ffff1000c34d644 RDX: 0000000000000001 RSI: 0000000000000402 RDI: 0000000000000008 RBP: ffff88006bbae738 R08: 1ffff1000d775cad R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800630a8b40 R13: 0000000000000000 R14: 0000000000000402 R15: ffff880061ba3b80 FS: 0000000000000000(0000) GS:ffff88006c600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff33cf89000 CR3: 0000000061c0a000 CR4: 00000000000006f0 Call Trace: usb_suspend_interface drivers/usb/core/driver.c:1209 usb_suspend_both+0x27f/0x7e0 drivers/usb/core/driver.c:1314 usb_runtime_suspend+0x41/0x120 drivers/usb/core/driver.c:1852 __rpm_callback+0x339/0xb60 drivers/base/power/runtime.c:334 rpm_callback+0x106/0x220 drivers/base/power/runtime.c:461 rpm_suspend+0x465/0x1980 drivers/base/power/runtime.c:596 __pm_runtime_suspend+0x11e/0x230 drivers/base/power/runtime.c:1009 pm_runtime_put_sync_autosuspend ./include/linux/pm_runtime.h:251 usb_new_device+0xa37/0x1020 drivers/usb/core/hub.c:2487 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: 8d 7c 24 20 48 89 fa 48 c1 ea 03 80 3c 02 00 75 5b 48 b8 00 00 00 00 00 fc ff df 4d 8b 6c 24 20 49 8d 7d 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 34 4d 8b 6d 08 4d 85 ed 74 0b e8 26 2b 51 fd 4c RIP: asix_suspend+0x76/0xc0 RSP: ffff88006bbae718 ---[ end trace dfc4f5649284342c ]--- Signed-off-by: Andrey Konovalov Signed-off-by: David S. Miller

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2017-11-02T17:04:46+00:00

Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman " * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

cdc_ether: flag the Huawei ME906/ME909 as WWAN

2017-10-24T09:32:54+00:00

The Huawei ME906 (12d1:15c1) comes with a standard ECM interface that requires management via AT commands sent over one of the control TTYs (e.g. connected with AT^NDISDUP). Signed-off-by: Aleksander Morgado Signed-off-by: David S. Miller