kernel/linux.git/drivers/net/usb/cdc_ether.c, branch v3.15.2

qmi_wwan/cdc_ether: move Novatel E371 (1410:9011) to qmi_wwan

2014-03-31T20:06:11+00:00

This device provides QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the device in cdc_ether and add its IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Yegor Yefremov Signed-off-by: David S. Miller

r8152: disable the ECM mode

2014-03-06T01:40:24+00:00

There are known issues for switching the drivers between ECM mode and vendor mode. The interrup transfer may become abnormal. The hardware may have the opportunity to die if you change the configuration without unloading the current driver first, because all the control transfers of the current driver would fail after the command of switching the configuration. Although to use the ecm driver and vendor driver independently is fine, it may have problems to change the driver from one to the other by switching the configuration. Additionally, now the vendor mode driver is more powerful than the ECM driver. Thus, disable the ECM mode driver, and let r8152 to set the configuration to vendor mode and reset the device automatically. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller

drivers/net: delete non-required instances of include

2014-01-16T19:53:26+00:00

None of these files are actually using any __init type directives and hence don't need to include . Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller

r8152: ecm and vendor modes coexist

2014-01-15T02:48:54+00:00

Remove the limitation that the ecm and r8152 drivers couldn't coexist. - Remove the devices from the blacklist of relative drivers. - Remove usb_driver_set_configuration() from r8152 driver. - Modify the id_table of the r8152 driver for the vendor mode only. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller

r8152: support RTL8153

2014-01-02T03:54:15+00:00

Support new chip RTL8153 which is the USB 3.0 giga ethernet adapter. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller

usb: Fix FSF address in file headers

2013-12-06T17:37:55+00:00

Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL so that we do not have to keep updating the header comments anytime the address changes. CC: Oliver Neukum CC: Steve Glendinning CC: Oliver Neukum Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller

net: usb: cdc_ether: use usb.h macros whenever possible

2013-09-17T01:38:00+00:00

Use USB_DEVICE_AND_INTERFACE_INFO and USB_VENDOR_AND_INTERFACE_INFO macros to reduce boilerplate. Signed-off-by: Fabio Porcedda Acked-by: Oliver Neukum Signed-off-by: David S. Miller

net: usb: cdc_ether: fix checkpatch errors and warnings

2013-09-17T01:38:00+00:00

Signed-off-by: Fabio Porcedda Acked-by: Oliver Neukum Signed-off-by: David S. Miller

net: usb: cdc_ether: Use wwan interface for Telit modules

2013-09-17T01:38:00+00:00

Signed-off-by: Fabio Porcedda Cc: # 3.0+ as far back as it applies cleanly Acked-by: Oliver Neukum Signed-off-by: David S. Miller

net/usb: add relative mii functions for r815x

2013-07-12T00:11:01+00:00

Base on cdc_ether, add the mii functions for RTL8152 and RTL8153. The RTL8152 and RTL8153 support ECM mode which use the driver of cdc_ether. Add the mii functions. Then, the basic PHY access is possible. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller