kernel/linux.git/drivers/net/usb/cdc-phonet.c, branch linux-4.16.y

net: usb: cdc-phonet: constify usb_device_id

2017-08-09T00:47:58+00:00

usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav Signed-off-by: David S. Miller

networking: introduce and use skb_put_data()

2017-06-16T15:48:37+00:00

A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

net: Fix inconsistent teardown and release of private netdev state.

2017-06-07T19:53:24+00:00

Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller

net: use core MTU range checking in USB NIC drivers

2016-10-20T18:51:08+00:00

usbnet: - Remove stale new_mtu <= 0 check in usbnet.c - Set min_mtu = 0, max_mtu = 65535 (sub-drivers must set their own max_mtu and/or min_mtu as needed) r8152: - Set appropriate max_mtu for different variants (1500 or 9194) lan78xx: - Set max_mtu = 9000 asix_driver: - max_mtu = 16384 for ax88178 variant ax88179: - max_mtu = 4088 cdc_ncm: - max_mtu from hardware cdc-phonet: - min_mtu = 6, max_mtu = 65541 sierra_net: - max_mtu = 1500, call usbnet_change_mtu directly - sierra_net_change_mtu checked for MTU > 1500, then called usbnet_change_mtu, but if we set max_mtu to let the network core handle the range check, then we can simply call usbnet_change_mtu directly smsc75xx: - max_mtu = 9000 CC: netdev@vger.kernel.org CC: Woojung Huh CC: Microchip Linux Driver Support CC: Hayes Wang CC: Oliver Neukum CC: Steve Glendinning Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller

cdc-phonet: use common parser

2015-09-15T19:43:49+00:00

This moves cdc-phonet to the common parser for CDC users to reduce code duplication. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller

phonet: Replace calls to __skb_alloc_page with __dev_alloc_page

2014-11-12T05:00:14+00:00

Replace the calls to __skb_alloc_page that are passed NULL with calls to __dev_alloc_page. In addition remove __GFP_COLD flag from allocations as we only want it for the Rx buffer which is taken care of by __dev_alloc_skb, not for any secondary allocations such as the queue element transmit descriptors. Cc: Oliver Neukum Cc: Felipe Balbi Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller

net: set name_assign_type in alloc_netdev()

2014-07-15T23:12:48+00:00

Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen Reviewed-by: David Herrmann Signed-off-by: David S. Miller

net: cdc-phonet: Staticize usbpn_probe

2013-09-20T18:41:02+00:00

'usbpn_probe' is referenced only in this file. Make it static. Signed-off-by: Sachin Kamat Acked-by: Rémi Denis-Courmont Cc: Rémi Denis-Courmont Signed-off-by: David S. Miller

cdc-phonet: Don't leak in usbpn_open

2012-08-08T23:04:47+00:00

We allocate memory for 'req' with usb_alloc_urb() and then test 'if (!req || rx_submit(pnd, req, GFP_KERNEL | __GFP_COLD))'. If we enter that branch due to '!req' then there is no problem. But if we enter the branch due to 'req' being != 0 and the 'rx_submit()' call being false, then we'll leak the memory we allocated. Deal with the leak by always calling 'usb_free_urb(req)' when entering the branch. If 'req' happens to be 0 then the call is harmless, if it is not 0 then we free the memory we allocated but don't need. Signed-off-by: Jesper Juhl Acked-by: Rémi Denis-Courmont Signed-off-by: David S. Miller

netvm: propagate page->pfmemalloc from skb_alloc_page to skb

2012-08-01T01:42:46+00:00

The skb->pfmemalloc flag gets set to true iff during the slab allocation of data in __alloc_skb that the the PFMEMALLOC reserves were used. If page splitting is used, it is possible that pages will be allocated from the PFMEMALLOC reserve without propagating this information to the skb. This patch propagates page->pfmemalloc from pages allocated for fragments to the skb. It works by reintroducing and expanding the skb_alloc_page() API to take an skb. If the page was allocated from pfmemalloc reserves, it is automatically copied. If the driver allocates the page before the skb, it should call skb_propagate_pfmemalloc() after the skb is allocated to ensure the flag is copied properly. Failure to do so is not critical. The resulting driver may perform slower if it is used for swap-over-NBD or swap-over-NFS but it should not result in failure. [davem@davemloft.net: API rename and consistency] Signed-off-by: Mel Gorman Acked-by: David S. Miller Cc: Neil Brown Cc: Peter Zijlstra Cc: Mike Christie Cc: Eric B Munson Cc: Eric Dumazet Cc: Sebastian Andrzej Siewior Cc: Mel Gorman Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds