kernel/linux.git/drivers/net/tun.c, branch v4.19.16

tun: forbid iface creation with rtnl ops

2018-12-17T08:24:28+00:00

[ Upstream commit 35b827b6d06199841a83839e8bb69c0cd13a28be ] It's not supported right now (the goal of the initial patch was to support 'ip link del' only). Before the patch: $ ip link add foo type tun [ 239.632660] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [snip] [ 239.636410] RIP: 0010:register_netdevice+0x8e/0x3a0 This panic occurs because dev->netdev_ops is not set by tun_setup(). But to have something usable, it will require more than just setting netdev_ops. Fixes: f019a7a594d9 ("tun: Implement ip link del tunXXX") CC: Eric W. Biederman Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tuntap: fix multiqueue rx

2018-11-23T07:17:03+00:00

[ Upstream commit 8ebebcba559a1bfbaec7bbda64feb9870b9c58da ] When writing packets to a descriptor associated with a combined queue, the packets should end up on that queue. Before this change all packets written to any descriptor associated with a tap interface end up on rx-0, even when the descriptor is associated with a different queue. The rx traffic can be generated by either of the following. 1. a simple tap program which spins up multiple queues and writes packets to each of the file descriptors 2. tx from a qemu vm with a tap multiqueue netdev The queue for rx traffic can be observed by either of the following (done on the hypervisor in the qemu case). 1. a simple netmap program which opens and reads from per-queue descriptors 2. configuring RPS and doing per-cpu captures with rxtxcpu Alternatively, if you printk() the return value of skb_get_rx_queue() just before each instance of netif_receive_skb() in tun.c, you will get 65535 for every skb. Calling skb_record_rx_queue() to set the rx queue to the queue_index fixes the association between descriptor and rx queue. Signed-off-by: Matthew Cover Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tun: Consistently configure generic netdev params via rtnetlink

2018-11-13T19:08:21+00:00

[ Upstream commit df52eab23d703142c766ac00bdb8db19d71238d0 ] Configuring generic network device parameters on tun will fail in presence of IFLA_INFO_KIND attribute in IFLA_LINKINFO nested attribute since tun_validate() always return failure. This can be visualized with following ip-link(8) command sequences: # ip link set dev tun0 group 100 # ip link set dev tun0 group 100 type tun RTNETLINK answers: Invalid argument with contrast to dummy and veth drivers: # ip link set dev dummy0 group 100 # ip link set dev dummy0 type dummy # ip link set dev veth0 group 100 # ip link set dev veth0 group 100 type veth Fix by returning zero in tun_validate() when @data is NULL that is always in case since rtnl_link_ops->maxtype is zero in tun driver. Fixes: f019a7a594d9 ("tun: Implement ip link del tunXXX") Signed-off-by: Serhey Popovych Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tun: napi flags belong to tfile

2018-10-02T06:27:28+00:00

Since tun->flags might be shared by multiple tfile structures, it is better to make sure tun_get_user() is using the flags for the current tfile. Presence of the READ_ONCE() in tun_napi_frags_enabled() gave a hint of what could happen, but we need something stronger to please syzbot. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13647 Comm: syz-executor5 Not tainted 4.19.0-rc5+ #59 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427 Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4 RSP: 0018:ffff8801c400f410 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325 RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0 RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000 R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358 R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004 FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: napi_gro_frags+0x3f4/0xc90 net/core/dev.c:5715 tun_get_user+0x31d5/0x42a0 drivers/net/tun.c:1922 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1967 call_write_iter include/linux/fs.h:1808 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6b8/0x9f0 fs/read_write.c:487 vfs_write+0x1fc/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457579 Code: 1d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe003614c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457579 RDX: 0000000000000012 RSI: 0000000020000000 RDI: 000000000000000a RBP: 000000000072c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0036156d4 R13: 00000000004c5574 R14: 00000000004d8e98 R15: 00000000ffffffff Modules linked in: RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427 Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4 RSP: 0018:ffff8801c400f410 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325 RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0 RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000 R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358 R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004 FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller

tun: initialize napi_mutex unconditionally

2018-10-02T06:27:28+00:00

This is the first part to fix following syzbot report : console output: https://syzkaller.appspot.com/x/log.txt?x=145378e6400000 kernel config: https://syzkaller.appspot.com/x/.config?x=443816db871edd66 dashboard link: https://syzkaller.appspot.com/bug?extid=e662df0ac1d753b57e80 Following patch is fixing the race condition, but it seems safer to initialize this mutex at tfile creation anyway. Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Eric Dumazet Reported-by: syzbot+e662df0ac1d753b57e80@syzkaller.appspotmail.com Signed-off-by: David S. Miller

tun: remove unused parameters

2018-10-02T06:27:28+00:00

tun_napi_disable() and tun_napi_del() do not need a pointer to the tun_struct Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

tun: remove ndo_poll_controller

2018-09-24T04:55:25+00:00

As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. tun uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2018-08-21T20:47:29+00:00

Pull core signal handling updates from Eric Biederman: "It was observed that a periodic timer in combination with a sufficiently expensive fork could prevent fork from every completing. This contains the changes to remove the need for that restart. This set of changes is split into several parts: - The first part makes PIDTYPE_TGID a proper pid type instead something only for very special cases. The part starts using PIDTYPE_TGID enough so that in __send_signal where signals are actually delivered we know if the signal is being sent to a a group of processes or just a single process. - With that prep work out of the way the logic in fork is modified so that fork logically makes signals received while it is running appear to be received after the fork completes" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits) signal: Don't send signals to tasks that don't exist signal: Don't restart fork when signals come in. fork: Have new threads join on-going signal group stops fork: Skip setting TIF_SIGPENDING in ptrace_init_task signal: Add calculate_sigpending() fork: Unconditionally exit if a fatal signal is pending fork: Move and describe why the code examines PIDNS_ADDING signal: Push pid type down into complete_signal. signal: Push pid type down into __send_signal signal: Push pid type down into send_signal signal: Pass pid type into do_send_sig_info signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task signal: Pass pid type into group_send_sig_info signal: Pass pid and pid type into send_sigqueue posix-timers: Noralize good_sigevent signal: Use PIDTYPE_TGID to clearly store where file signals will be sent pid: Implement PIDTYPE_TGID pids: Move the pgrp and session pid pointers from task_struct to signal_struct kvm: Don't open code task_pid in kvm_vcpu_ioctl pids: Compute task_tgid using signal->leader_pid ...

tun: not use hardcoded mask value

2018-08-04T20:15:11+00:00

0x3ff in tun_hashfn is mask of TUN_NUM_FLOW_ENTRIES, instead of hardcode, define a macro to setup the relationship with TUN_NUM_FLOW_ENTRIES Signed-off-by: Li RongQing Signed-off-by: David S. Miller

signal: Use PIDTYPE_TGID to clearly store where file signals will be sent

2018-07-21T15:43:12+00:00

When f_setown is called a pid and a pid type are stored. Replace the use of PIDTYPE_PID with PIDTYPE_TGID as PIDTYPE_TGID goes to the entire thread group. Replace the use of PIDTYPE_MAX with PIDTYPE_PID as PIDTYPE_PID now is only for a thread. Update the users of __f_setown to use PIDTYPE_TGID instead of PIDTYPE_PID. For now the code continues to capture task_pid (when task_tgid would really be appropriate), and iterate on PIDTYPE_PID (even when type == PIDTYPE_TGID) out of an abundance of caution to preserve existing behavior. Oleg Nesterov suggested using the test to ensure we use PIDTYPE_PID for tgid lookup also be used to avoid taking the tasklist lock. Suggested-by: Oleg Nesterov Signed-off-by: "Eric W. Biederman"