kernel/linux.git/drivers/net/thunderbolt.c, branch v5.19

net: thunderbolt: use eth_hw_addr_set()

2021-10-28T00:13:36+00:00

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Acked-by: Mika Westerberg Link: https://lore.kernel.org/r/20211026175547.3198242-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: thunderbolt: Align the driver to the USB4 networking spec

2021-03-18T15:25:31+00:00

The USB4 networking spec (USB4NET) recommends different timeouts, and also suggest that the driver sets the 64k frame support flag in the properties block. Make the networking driver to honor this. Signed-off-by: Mika Westerberg

thunderbolt: Allow multiple DMA tunnels over a single XDomain connection

2021-03-18T15:25:31+00:00

Currently we have had an artificial limitation of a single DMA tunnel per XDomain connection. However, hardware wise there is no such limit and software based connection manager can take advantage of all the DMA rings available on the host to establish tunnels. For this reason make the tb_xdomain_[enable|disable]_paths() to take the DMA ring and HopID as parameter instead of storing them in the struct tb_xdomain. We also add API functions to allocate input and output HopIDs of the XDomain connection that the service drivers can use instead of hard-coding. Also convert the two existing service drivers over to this API. Signed-off-by: Mika Westerberg

Merge tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-12-15T21:54:56+00:00

Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ...

net: thunderbolt: convert comma to semicolon

2020-12-10T00:23:08+00:00

Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun Acked-by: Mika Westerberg Signed-off-by: David S. Miller

thunderbolt: Add support for end-to-end flow control

2020-11-11T07:20:16+00:00

USB4 spec defines end-to-end (E2E) flow control that can be used between hosts to prevent overflow of a RX ring. We previously had this partially implemented but that code was removed with commit 53f13319d131 ("thunderbolt: Get rid of E2E workaround") with the idea that we add it back properly if there ever is need. Now that we are going to add DMA traffic test driver (in subsequent patches) this can be useful. For this reason we modify tb_ring_alloc_rx/tx() so that they accept RING_FLAG_E2E and configure the hardware ring accordingly. The RX side also requires passing TX HopID (e2e_tx_hop) used in the credit grant packets. Signed-off-by: Mika Westerberg Acked-by: Yehezkel Bernat Reviewed-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-08-06T03:13:21+00:00

Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...

net: thunderbolt: Add comment clarifying prtcstns flags

2020-06-24T03:36:02+00:00

ThunderboltIP protocol currently has two flags from which we only support and set match frags ID. The first flag is reserved for full E2E flow control. Add a comment that clarifies them. Suggested-by: Yehezkel Bernat Signed-off-by: Mika Westerberg Reviewed-by: Yehezkel Bernat Signed-off-by: David S. Miller

thunderbolt: Get rid of E2E workaround

2020-06-22T16:58:06+00:00

The end-to-end (E2E) workaround is needed for Falcon Ridge (TBT 2) controller when E2E is enabled for both ends of the host-to-host connection. However, we never supported full E2E in the first place so this code is not necessary at the moment. Further this allows us to use all available rings for data except ring 0 which is reserved for the control path. The complete E2E flow control is explained in the USB4 spec so we may add it back later if needed but at least the networking driver seems to work fine without, and the higher level stack, like TCP will retransmit lost packets anyway. Signed-off-by: Mika Westerberg

net: Use skb_frag_off accessors

2019-07-30T21:21:32+00:00

Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon Signed-off-by: David S. Miller