kernel/linux.git/drivers/net/team, branch v4.14.263

team: protect features update by RCU to avoid deadlock

2021-02-03T22:22:23+00:00

commit f0947d0d21b219e03940b9be6628a43445c0de7a upstream. Function __team_compute_features() is protected by team->lock mutex when it is called from team_compute_features() used when features of an underlying device is changed. This causes a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device is fired due to change propagated from team driver (e.g. MTU change). It's because callbacks like team_change_mtu() or team_vlan_rx_{add,del}_vid() protect their port list traversal by team->lock mutex. Example (r8169 case where this driver disables TSO for certain MTU values): ... [ 6391.348202] __mutex_lock.isra.6+0x2d0/0x4a0 [ 6391.358602] team_device_event+0x9d/0x160 [team] [ 6391.363756] notifier_call_chain+0x47/0x70 [ 6391.368329] netdev_update_features+0x56/0x60 [ 6391.373207] rtl8169_change_mtu+0x14/0x50 [r8169] [ 6391.378457] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.387022] dev_set_mtu+0x52/0x90 [ 6391.390820] team_change_mtu+0x64/0xf0 [team] [ 6391.395683] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.399963] do_setlink+0x231/0xf50 ... In fact team_compute_features() called from team_device_event() does not need to be protected by team->lock mutex and rcu_read_lock() is sufficient there for port list traversal. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Cc: Saeed Mahameed Signed-off-by: Ivan Vecera Reviewed-by: Cong Wang Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: team: fix memory leak in __team_options_register

2020-10-14T07:51:12+00:00

commit 9a9e77495958c7382b2438bc19746dd3aaaabb8e upstream. The variable "i" isn't initialized back correctly after the first loop under the label inst_rollback gets executed. The value of "i" is assigned to be option_count - 1, and the ensuing loop (under alloc_rollback) begins by initializing i--. Thus, the value of i when the loop begins execution will now become i = option_count - 2. Thus, when kfree(dst_opts[i]) is called in the second loop in this order, (i.e., inst_rollback followed by alloc_rollback), dst_optsp[option_count - 2] is the first element freed, and dst_opts[option_count - 1] does not get freed, and thus, a memory leak is caused. This memory leak can be fixed, by assigning i = option_count (instead of option_count - 1). Fixes: 80f7c6683fe0 ("team: add support for per-port options") Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: set dev->needed_headroom in team_setup_by_port()

2020-10-14T07:51:12+00:00

commit 89d01748b2354e210b5d4ea47bc25a42a1b42c82 upstream. Some devices set needed_headroom. If we ignore it, we might end up crashing in various skb_push() for example in ipgre_header() since some layers assume enough headroom has been reserved. Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: fix hang in team_mode_get()

2020-05-02T15:24:17+00:00

[ Upstream commit 1c30fbc76b8f0c07c92a8ca4cd7c456612e17eb5 ] When team mode is changed or set, the team_mode_get() is called to check whether the mode module is inserted or not. If the mode module is not inserted, it calls the request_module(). In the request_module(), it creates a child process, which is the "modprobe" process and waits for the done of the child process. At this point, the following locks were used. down_read(&cb_lock()); by genl_rcv() genl_lock(); by genl_rcv_msc() rtnl_lock(); by team_nl_cmd_options_set() mutex_lock(&team->lock); by team_nl_team_get() Concurrently, the team module could be removed by rmmod or "modprobe -r" The __exit function of team module is team_module_exit(), which calls team_nl_fini() and it tries to acquire following locks. down_write(&cb_lock); genl_lock(); Because of the genl_lock() and cb_lock, this process can't be finished earlier than request_module() routine. The problem secenario. CPU0 CPU1 team_mode_get request_module() modprobe -r team_mode_roundrobin team <--(B) modprobe team <--(A) team_mode_roundrobin By request_module(), the "modprobe team_mode_roundrobin" command will be executed. At this point, the modprobe process will decide that the team module should be inserted before team_mode_roundrobin. Because the team module is being removed. By the module infrastructure, the same module insert/remove operations can't be executed concurrently. So, (A) waits for (B) but (B) also waits for (A) because of locks. So that the hang occurs at this point. Test commands: while : do teamd -d & killall teamd & modprobe -rv team_mode_roundrobin & done The approach of this patch is to hold the reference count of the team module if the team module is compiled as a module. If the reference count of the team module is not zero while request_module() is being called, the team module will not be removed at that moment. So that the above scenario could not occur. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Taehee Yoo Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: add missing attribute validation for array index

2020-03-20T09:54:11+00:00

[ Upstream commit 669fcd7795900cd1880237cbbb57a7db66cb9ac8 ] Add missing attribute validation for TEAM_ATTR_OPTION_ARRAY_INDEX to the netlink policy. Fixes: b13033262d24 ("team: introduce array options") Signed-off-by: Jakub Kicinski Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: add missing attribute validation for port ifindex

2020-03-20T09:54:11+00:00

[ Upstream commit dd25cb272ccce4db67dc8509278229099e4f5e99 ] Add missing attribute validation for TEAM_ATTR_OPTION_PORT_IFINDEX to the netlink policy. Fixes: 80f7c6683fe0 ("team: add support for per-port options") Signed-off-by: Jakub Kicinski Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: Add vlan tx offload to hw_enc_features

2019-08-25T08:50:29+00:00

[ Upstream commit 227f2f030e28d8783c3d10ce70ff4ba79cad653f ] We should also enable team's vlan tx offload in hw_enc_features, pass the vlan packets to the slave devices with vlan tci, let the slave handle vlan tunneling offload implementation. Fixes: 3268e5cb494d ("team: Advertise tunneling offload features") Signed-off-by: YueHaibing Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: Always enable vlan tx offload

2019-07-03T11:16:02+00:00

[ Upstream commit ee4297420d56a0033a8593e80b33fcc93fda8509 ] We should rather have vlan_tci filled all the way down to the transmitting netdevice and let it do the hw/sw vlan implementation. Suggested-by: Jiri Pirko Signed-off-by: YueHaibing Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: fix possible recursive locking when add slaves

2019-05-02T07:40:34+00:00

[ Upstream commit 925b0c841e066b488cc3a60272472b2c56300704 ] If we add a bond device which is already the master of the team interface, we will hold the team->lock in team_add_slave() first and then request the lock in team_set_mac_address() again. The functions are called like: - team_add_slave() - team_port_add() - team_port_enter() - team_modeop_port_enter() - __set_port_dev_addr() - dev_set_mac_address() - bond_set_mac_address() - dev_set_mac_address() - team_set_mac_address Although team_upper_dev_link() would check the upper devices but it is called too late. Fix it by adding a checking before processing the slave. v2: Do not split the string in netdev_err() Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Acked-by: Jiri Pirko Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

team: set slave to promisc if team is already in promisc mode

2019-04-27T07:35:34+00:00

[ Upstream commit 43c2adb9df7ddd6560fd3546d925b42cef92daa0 ] After adding a team interface to bridge, the team interface will enter promisc mode. Then if we add a new slave to team0, the slave will keep promisc off. Fix it by setting slave to promisc on if team master is already in promisc mode, also do the same for allmulti. v2: add promisc and allmulti checking when delete ports Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman