kernel/linux.git/drivers/net/team/team.c, branch v6.3

Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"

2023-01-19T04:32:44+00:00

This reverts commit 0aa64df30b382fc71d4fb1827d528e0eb3eff854. Currently IFF_NO_ADDRCONF is used to prevent all ipv6 addrconf for the slave ports of team, bonding and failover devices and it means no ipv6 packets can be sent out through these slave ports. However, for team device, "nsna_ping" link_watch requires ipv6 addrconf. Otherwise, the link will be marked failure. This patch removes the IFF_NO_ADDRCONF flag set for team port, and we will fix the original issue in another patch, as Jakub suggested. Fixes: 0aa64df30b38 ("net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf") Signed-off-by: Xin Long Link: https://lore.kernel.org/r/63e09531fc47963d2e4eff376653d3db21b97058.1673980932.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski

net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf

2022-12-12T23:18:25+00:00

This patch is to use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf for Team port. This flag will be set in team_port_enter(), which is called before dev_open(), and cleared in team_port_leave(), called after dev_close() and the err path in team_port_add(). Signed-off-by: Xin Long Signed-off-by: Jakub Kicinski

net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).

2022-10-29T03:13:54+00:00

Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Acked-by: Peter Zijlstra (Intel) Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-09-22T20:02:10+00:00

drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski

net: team: Unsync device addresses on ndo_stop

2022-09-16T13:34:01+00:00

Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller

net: move from strlcpy with unused retval to strscpy

2022-08-31T21:11:07+00:00

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Acked-by: Marc Kleine-Budde # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski

genetlink: start to validate reserved header bytes

2022-08-29T11:47:15+00:00

We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski Acked-by: Paul Moore (NetLabel) Signed-off-by: David S. Miller

team: adopt u64_stats_t

2022-06-10T04:53:12+00:00

As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type") we should use u64_stats_t and related accessors to avoid load/store tearing. Signed-off-by: Eric Dumazet Signed-off-by: Jakub Kicinski

teaming: deliver link-local packets with the link they arrive on

2022-02-18T11:40:52+00:00

skb is ignored if team port is disabled. We want the skb to be delivered if it's an link layer packet. Issue is already fixed for bonding in commit b89f04c61efe ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") changelog: v2: change LLDP -> link layer in comments/commit descrip, comment format Signed-off-by: jeffreyji Signed-off-by: David S. Miller

net: use dev_addr_set()

2021-10-09T10:55:01+00:00

Use dev_addr_set() instead of writing directly to netdev->dev_addr in various misc and old drivers. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller