kernel/linux.git/drivers/net/pse-pd, branch v6.18.21

net: pse-pd: tps23881: Fix current measurement scaling

2025-10-08T01:30:53+00:00

The TPS23881 improves on the TPS23880 with current sense resistors reduced from 255 mOhm to 200 mOhm. This has a direct impact on the scaling of the current measurement. However, the latest TPS23881 data sheet from May 2023 still shows the scaling of the TPS23880 model. Fixes: 7f076ce3f1733 ("net: pse-pd: tps23881: Add support for power limit and measurement features") Signed-off-by: Thomas Wismer Acked-by: Kory Maincent Link: https://patch.msgid.link/20251006204029.7169-2-thomas@wismer.xyz Signed-off-by: Jakub Kicinski

net: pse-pd: Add Si3474 PSE controller driver

2025-08-28T12:41:59+00:00

Add a driver for the Skyworks Si3474 I2C Power Sourcing Equipment controller. Driver supports basic features of Si3474 IC: - get port status, - get port power, - get port voltage, - enable/disable port power. Only 4p configurations are supported at this moment. Signed-off-by: Piotr Kubik Reviewed-by: Kory Maincent Link: https://patch.msgid.link/9b72c8cd-c8d3-4053-9c80-671b9481d166@adtran.com Signed-off-by: Paolo Abeni

net: pse-pd: pd692x0: Skip power budget configuration when undefined

2025-08-21T14:56:08+00:00

If the power supply's power budget is not defined in the device tree, the current code still requests power and configures the PSE manager with a 0W power limit, which is undesirable behavior. Skip power budget configuration entirely when the budget is zero, avoiding unnecessary power requests and preventing invalid 0W limits from being set on the PSE manager. Fixes: 359754013e6a ("net: pse-pd: pd692x0: Add support for PSE PI priority feature") Signed-off-by: Kory Maincent Acked-by: Oleksij Rempel Link: https://patch.msgid.link/20250820133321.841054-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski

net: pse-pd: pd692x0: Fix power budget leak in manager setup error path

2025-08-21T14:55:40+00:00

Fix a resource leak where manager power budgets were freed on both success and error paths during manager setup. Power budgets should only be freed on error paths after regulator registration or during driver removal. Refactor cleanup logic by extracting OF node cleanup and power budget freeing into separate helper functions for better maintainability. Fixes: 359754013e6a ("net: pse-pd: pd692x0: Add support for PSE PI priority feature") Signed-off-by: Kory Maincent Link: https://patch.msgid.link/20250820132708.837255-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski

net: pse-pd: pd692x0: reduce stack usage in pd692x0_setup_pi_matrix

2025-07-11T01:05:36+00:00

The pd692x0_manager array in this function is really too big to fit on the stack, though this never triggered a warning until a recent patch made it slightly bigger: drivers/net/pse-pd/pd692x0.c: In function 'pd692x0_setup_pi_matrix': drivers/net/pse-pd/pd692x0.c:1210:1: error: the frame size of 1584 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] Change the function to dynamically allocate the array here. Fixes: 359754013e6a ("net: pse-pd: pd692x0: Add support for PSE PI priority feature") Signed-off-by: Arnd Bergmann Reviewed-by: Kory Maincent Link: https://patch.msgid.link/20250709153210.1920125-1-arnd@kernel.org Signed-off-by: Jakub Kicinski

net: pse-pd: tps23881: Add support for static port priority feature

2025-06-19T02:00:18+00:00

This patch enhances PSE callbacks by introducing support for the static port priority feature. It extends interrupt management to handle and report detection, classification, and disconnection events. Additionally, it introduces the pi_get_pw_req() callback, which provides information about the power requested by the Powered Devices. Interrupt support is essential for the proper functioning of the TPS23881 controller. Without it, after a power-on (PWON), the controller will no longer perform detection and classification. This could lead to potential hazards, such as connecting a non-PoE device after a PoE device, which might result in magic smoke. Signed-off-by: Kory Maincent (Dent Project) Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-12-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski

net: pse-pd: pd692x0: Add support for controller and manager power supplies

2025-06-19T02:00:18+00:00

Add support for managing the VDD and VDDA power supplies for the PD692x0 PSE controller, as well as the VAUX5 and VAUX3P3 power supplies for the PD6920x PSE managers. Signed-off-by: Kory Maincent (Dent Project) Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-10-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski

net: pse-pd: pd692x0: Add support for PSE PI priority feature

2025-06-19T02:00:17+00:00

This patch extends the PSE callbacks by adding support for the newly introduced pi_set_prio() callback, enabling the configuration of PSE PI priorities. The current port priority is now also included in the status information returned to users. Signed-off-by: Kory Maincent (Dent Project) Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-9-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski

net: pse-pd: Add support for budget evaluation strategies

2025-06-19T02:00:17+00:00

This patch introduces the ability to configure the PSE PI budget evaluation strategies. Budget evaluation strategies is utilized by PSE controllers to determine which ports to turn off first in scenarios such as power budget exceedance. The pis_prio_max value is used to define the maximum priority level supported by the controller. Both the current priority and the maximum priority are exposed to the user through the pse_ethtool_get_status call. This patch add support for two mode of budget evaluation strategies. 1. Static Method: This method involves distributing power based on PD classification. It’s straightforward and stable, the PSE core keeping track of the budget and subtracting the power requested by each PD’s class. Advantages: Every PD gets its promised power at any time, which guarantees reliability. Disadvantages: PD classification steps are large, meaning devices request much more power than they actually need. As a result, the power supply may only operate at, say, 50% capacity, which is inefficient and wastes money. Priority max value is matching the number of PSE PIs within the PSE. 2. Dynamic Method: To address the inefficiencies of the static method, vendors like Microchip have introduced dynamic power budgeting, as seen in the PD692x0 firmware. This method monitors the current consumption per port and subtracts it from the available power budget. When the budget is exceeded, lower-priority ports are shut down. Advantages: This method optimizes resource utilization, saving costs. Disadvantages: Low-priority devices may experience instability. Priority max value is set by the PSE controller driver. For now, budget evaluation methods are not configurable and cannot be mixed. They are hardcoded in the PSE driver itself, as no current PSE controller supports both methods. Signed-off-by: Kory Maincent (Dent Project) Acked-by: Oleksij Rempel Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-7-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski

net: pse-pd: Add helper to report hardware enable status of the PI

2025-06-19T02:00:17+00:00

Refactor code by introducing a helper function to retrieve the hardware enabled state of the PI, avoiding redundant implementations in the future. Signed-off-by: Kory Maincent (Dent Project) Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-6-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski