kernel/linux.git/drivers/net/phy, branch v4.19.112

net: phy: fix MDIO bus PM PHY resuming

2020-03-18T06:14:17+00:00

[ Upstream commit 611d779af7cad2b87487ff58e4931a90c20b113c ] So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends") Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: Avoid multiple suspends

2020-03-18T06:14:10+00:00

commit 503ba7c6961034ff0047707685644cad9287c226 upstream. It is currently possible for a PHY device to be suspended as part of a network device driver's suspend call while it is still being attached to that net_device, either via phy_suspend() or implicitly via phy_stop(). Later on, when the MDIO bus controller get suspended, we would attempt to suspend again the PHY because it is still attached to a network device. This is both a waste of time and creates an opportunity for improper clock/power management bugs to creep in. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

phy: Revert toggling reset changes.

2020-03-18T06:14:10+00:00

commit 7b566f70e1bf65b189b66eb3de6f431c30f7dff2 upstream. This reverts: ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached") 8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not attached") Andrew Lunn informs me that there are alternative efforts underway to fix this more properly. Signed-off-by: David S. Miller [just take the ef1b5bf506b1 revert - gregkh] Signed-off-by: Greg Kroah-Hartman

net: phy: restore mdio regs in the iproc mdio driver

2020-03-05T15:42:16+00:00

commit 6f08e98d62799e53c89dbf2c9a49d77e20ca648c upstream. The mii management register in iproc mdio block does not have a retention register so it is lost on suspend. Save and restore value of register while resuming from suspend. Fixes: bb1a619735b4 ("net: phy: Initialize mdio clock at probe function") Signed-off-by: Arun Parameswaran Signed-off-by: Scott Branden Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: don't clear BMCR in genphy_soft_reset

2020-01-27T13:50:34+00:00

[ Upstream commit d29f5aa0bc0c321e1b9e4658a2a7e08e885da52a ] So far we effectively clear the BMCR register. Some PHY's can deal with this (e.g. because they reset BMCR to a default as part of a soft-reset) whilst on others this causes issues because e.g. the autoneg bit is cleared. Marvell is an example, see also thread [0]. So let's be a little bit more gentle and leave all bits we're not interested in as-is. This change is needed for PHY drivers to properly deal with the original patch. [0] https://marc.info/?t=155264050700001&r=1&w=2 Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Phil Reid Tested-by: liweihang Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

mdio_bus: Fix PTR_ERR() usage after initialization to constant

2020-01-27T13:50:24+00:00

[ Upstream commit 780feae7eb69388c8d8b661cda6706b0dc0f642b ] Fix coccinelle warning: ./drivers/net/phy/mdio_bus.c:51:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 ./drivers/net/phy/mdio_bus.c:52:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 fix this by using IS_ERR before PTR_ERR Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") Signed-off-by: YueHaibing Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: fixed_phy: Fix fixed_phy not checking GPIO

2020-01-27T13:50:20+00:00

[ Upstream commit 8f289805616e81f7c1690931aa8a586c76f4fa88 ] Fix fixed_phy not checking GPIO if no link_update callback is registered. In the original version all users registered a link_update callback so the issue was masked. Fixes: a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.") Reviewed-by: Andrew Lunn Signed-off-by: Moritz Fischer Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ9031

2020-01-27T13:50:13+00:00

[ Upstream commit 1d16073a326891c2a964e4cb95bc18fbcafb5f74 ] So far genphy_soft_reset was used automatically if the PHY driver didn't implement the soft_reset callback. This changed with the mentioned commit and broke KSZ9031. To fix this configure the KSZ9031 PHY driver to use genphy_soft_reset. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Reported-by: Tony Lindgren Signed-off-by: Heiner Kallweit Tested-by: Tony Lindgren Tested-by: Sekhar Nori Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: Fix not to call phy_resume() if PHY is not attached

2020-01-27T13:50:03+00:00

[ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ] This patch fixes an issue that mdio_bus_phy_resume() doesn't call phy_resume() if the PHY is not attached. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: initialise phydev speed and duplex sanely

2019-12-31T15:36:15+00:00

[ Upstream commit a5d66f810061e2dd70fb7a108dcd14e535bc639f ] When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by: Russell King Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin