kernel/linux.git/drivers/net/phy, branch v4.14.85

net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs

2018-11-23T07:19:26+00:00

[ Upstream commit df5a8ec64eed7fe45b556cfff503acd6429ab817 ] Up until commit 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible"), the _cansleep variants of the gpio_ API was used. After that commit and the change to gpiod_ API, the _cansleep() was dropped. This then results in WARN_ON() when used with GPIO devices which do sleep. Add back the _cansleep() to avoid this. Fixes: 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible") Signed-off-by: Martin Schiller Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: phylink: ensure the carrier is off when starting phylink

2018-11-13T19:14:55+00:00

[ Upstream commit aeeb2e8fdefdd5d257a1446351c70cb3df540199 ] Phylink made an assumption about the carrier state being down when calling phylink_start(). If this assumption isn't satisfied, the internal phylink state could misbehave and a net device could end up not being functional. This patch fixes this by explicitly calling netif_carrier_off() in phylink_start(). Signed-off-by: Antoine Tenart Acked-by: Russell King Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: phy: phylink: Don't release NULL GPIO

2018-11-04T13:52:45+00:00

[ Upstream commit 3bcd47726c3b744fd08781795cca905cc59a1382 ] If CONFIG_GPIOLIB is disabled, gpiod_put() becomes a stub that produces a warning, this helped identify that we could be attempting to release a NULL pl->link_gpio GPIO descriptor, so guard against that. Fixes: daab3349ad1a ("net: phy: phylink: Release link GPIO") Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: Add general dummy stubs for MMD register access

2018-11-04T13:52:43+00:00

[ Upstream commit 5df7af85ecd88e8b5f1f31d6456c3cf38a8bbdda ] For some phy devices, even though they don't support the MMD extended register access, it does have some side effect if we are trying to read/write the MMD registers via indirect method. So introduce general dummy stubs for MMD register access which these devices can use to avoid such side effect. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: realtek: Use the dummy stubs for MMD register access for rtl8211b

2018-11-04T13:52:42+00:00

[ Upstream commit 0231b1a074c672f8c00da00a57144072890d816b ] The Ethernet on mpc8315erdb is broken since commit b6b5e8a69118 ("gianfar: Disable EEE autoneg by default"). The reason is that even though the rtl8211b doesn't support the MMD extended registers access, it does return some random values if we trying to access the MMD register via indirect method. This makes it seem that the EEE is supported by this phy device. And the subsequent writing to the MMD registers does cause the phy malfunction. So use the dummy stubs for the MMD register access to fix this issue. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: xgmiitorgmii: Check phy_driver ready before accessing

2018-10-04T00:00:51+00:00

[ Upstream commit ab4e6ee578e88a659938db8fbf33720bc048d29c ] Since a phy_device is added to the global mdio_bus list during phy_device_register(), but a phy_device's phy_driver doesn't get attached until phy_probe(). It's possible of_phy_find_device() in xgmiitorgmii will return a valid phy with a NULL phy_driver. Leading to a NULL pointer access during the memcpy(). Fixes this Oops: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.40 #1 Hardware name: Xilinx Zynq Platform task: ce4c8d00 task.stack: ce4ca000 PC is at memcpy+0x48/0x330 LR is at xgmiitorgmii_probe+0x90/0xe8 pc : [] lr : [] psr: 20000013 sp : ce4cbb54 ip : 00000000 fp : ce4cbb8c r10: 00000000 r9 : 00000000 r8 : c0c49178 r7 : 00000000 r6 : cdc14718 r5 : ce762800 r4 : cdc14710 r3 : 00000000 r2 : 00000054 r1 : 00000000 r0 : cdc14718 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xce4ca210) ... [] (memcpy) from [] (xgmiitorgmii_probe+0x90/0xe8) [] (xgmiitorgmii_probe) from [] (mdio_probe+0x28/0x34) [] (mdio_probe) from [] (driver_probe_device+0x254/0x414) [] (driver_probe_device) from [] (__device_attach_driver+0xac/0x10c) [] (__device_attach_driver) from [] (bus_for_each_drv+0x84/0xc8) [] (bus_for_each_drv) from [] (__device_attach+0xd0/0x134) [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [] (device_initial_probe) from [] (bus_probe_device+0x98/0xa0) [] (bus_probe_device) from [] (device_add+0x43c/0x5d0) [] (device_add) from [] (mdio_device_register+0x34/0x80) [] (mdio_device_register) from [] (of_mdiobus_register+0x170/0x30c) [] (of_mdiobus_register) from [] (macb_probe+0x710/0xc00) [] (macb_probe) from [] (platform_drv_probe+0x44/0x80) [] (platform_drv_probe) from [] (driver_probe_device+0x254/0x414) [] (driver_probe_device) from [] (__driver_attach+0x10c/0x118) [] (__driver_attach) from [] (bus_for_each_dev+0x8c/0xd0) [] (bus_for_each_dev) from [] (driver_attach+0x2c/0x30) [] (driver_attach) from [] (bus_add_driver+0x50/0x260) [] (bus_add_driver) from [] (driver_register+0x88/0x108) [] (driver_register) from [] (__platform_driver_register+0x50/0x58) [] (__platform_driver_register) from [] (macb_driver_init+0x24/0x28) [] (macb_driver_init) from [] (do_one_initcall+0x60/0x1a4) [] (do_one_initcall) from [] (kernel_init_freeable+0x15c/0x1f8) [] (kernel_init_freeable) from [] (kernel_init+0x18/0x124) [] (kernel_init) from [] (ret_from_fork+0x14/0x20) Code: ba000002 f5d1f03c f5d1f05c f5d1f07c (e8b151f8) ---[ end trace 3e4ec21905820a1f ]--- Signed-off-by: Brandon Maier Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: phy: xgmiitorgmii: Check read_status results

2018-10-04T00:00:51+00:00

[ Upstream commit 8d0752d11312be830c33e84dfd1016e6a47c2938 ] We're ignoring the result of the attached phy device's read_status(). Return it so we can detect errors. Signed-off-by: Brandon Maier Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: phy: Fix the register offsets in Broadcom iProc mdio mux driver

2018-09-19T20:43:39+00:00

[ Upstream commit 77fefa93bfebe4df44f154f2aa5938e32630d0bf ] Modify the register offsets in the Broadcom iProc mdio mux to start from the top of the register address space. Earlier, the base address pointed to the end of the block's register space. The base address will now point to the start of the mdio's address space. The offsets have been fixed to match this. Signed-off-by: Arun Parameswaran Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: mdio-mux: bcm-iproc: fix wrong getter and setter pair

2018-08-03T05:50:44+00:00

[ Upstream commit b0753408aadf32c7ece9e6b765017881e54af833 ] mdio_mux_iproc_probe() uses platform_set_drvdata() to store md pointer in device, whereas mdio_mux_iproc_remove() restores md pointer by dev_get_platdata(&pdev->dev). This leads to wrong resources release. The patch replaces getter to platform_get_drvdata. Fixes: 98bc865a1ec8 ("net: mdio-mux: Add MDIO mux driver for iProc SoCs") Signed-off-by: Anton Vasilyev Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: phylink: Release link GPIO

2018-08-03T05:50:35+00:00

[ Upstream commit daab3349ad1a69663ccad278ed71d55974d104b4 ] We are not releasing the link GPIO descriptor with gpiod_put() which results in subsequent probing to get -EBUSY when calling fwnode_get_named_gpiod(). Fix this by doing the release in phylink_destroy(). Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman