kernel/linux.git/drivers/net/phy, branch v4.14.263

net: phy: marvell: configure RGMII delays for 88E1118

2022-01-27T08:00:57+00:00

[ Upstream commit f22725c95ececb703c3f741e8f946d23705630b7 ] Corentin Labbe reports that the SSI 1328 does not work when allowing the PHY to operate at gigabit speeds, but does work with the generic PHY driver. This appears to be because m88e1118_config_init() writes a fixed value to the MSCR register, claiming that this is to enable 1G speeds. However, this always sets bits 4 and 5, enabling RGMII transmit and receive delays. The suspicion is that the original board this was added for required the delays to make 1G speeds work. Add the necessary configuration for RGMII delays for the 88E1118 to bring this into line with the requirements for RGMII support, and thus make the SSI 1328 work. Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502. Reported-by: Corentin Labbe Tested-by: Corentin Labbe Signed-off-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: mdio: Demote probed message to debug print

2022-01-27T08:00:56+00:00

[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ] On systems with large numbers of MDIO bus/muxes the message indicating that a given MDIO bus has been successfully probed is repeated for as many buses we have, which can eat up substantial boot time for no reason, demote to a debug print. Reported-by: Maxime Bizon Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: phylink: avoid mvneta warning when setting pause parameters

2021-11-26T10:40:32+00:00

[ Upstream commit fd8d9731bcdfb22d28e45bce789bcb211c868c78 ] mvneta does not support asymetric pause modes, and it flags this by the lack of AsymPause in the supported field. When setting pause modes, we check that pause->rx_pause == pause->tx_pause, but only when pause autoneg is enabled. When pause autoneg is disabled, we still allow pause->rx_pause != pause->tx_pause, which is incorrect when the MAC does not support asymetric pause, and causes mvneta to issue a warning. Fix this by removing the test for pause->autoneg, so we always check that pause->rx_pause == pause->tx_pause for network devices that do not support AsymPause. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King (Oracle) Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

phy: micrel: ksz8041nl: do not use power down mode

2021-11-26T10:40:31+00:00

[ Upstream commit 2641b62d2fab52648e34cdc6994b2eacde2d27c1 ] Some Micrel KSZ8041NL PHY chips exhibit continuous RX errors after using the power down mode bit (0.11). If the PHY is taken out of power down mode in a certain temperature range, the PHY enters a weird state which leads to continuously reporting RX errors. In that state, the MAC is not able to receive or send any Ethernet frames and the activity LED is constantly blinking. Since Linux is using the suspend callback when the interface is taken down, ending up in that state can easily happen during a normal startup. Micrel confirmed the issue in errata DS80000700A [*], caused by abnormal clock recovery when using power down mode. Even the latest revision (A4, Revision ID 0x1513) seems to suffer that problem, and according to the errata is not going to be fixed. Remove the suspend/resume callback to avoid using the power down mode completely. [*] https://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf Fixes: 1a5465f5d6a2 ("phy/micrel: Add suspend/resume support to Micrel PHYs") Signed-off-by: Stefan Agner Acked-by: Marcel Ziswiler Signed-off-by: Francesco Dolcini Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

Revert "net: mdiobus: Fix memory leak in __mdiobus_register"

2021-11-02T17:25:11+00:00

commit 10eff1f5788b6ffac212c254e2f3666219576889 upstream. This reverts commit ab609f25d19858513919369ff3d9a63c02cd9e2e. This patch is correct in the sense that we _should_ call device_put() in case of device_register() failure, but the problem in this code is more vast. We need to set bus->state to UNMDIOBUS_REGISTERED before calling device_register() to correctly release the device in mdiobus_free(). This patch prevents us from doing it, since in case of device_register() failure put_device() will be called 2 times and it will cause UAF or something else. Also, Reported-by: tag in revered commit was wrong, since syzbot reported different leak in same function. Link: https://lore.kernel.org/netdev/20210928092657.GI2048@kadam/ Acked-by: Yanfei Xu Signed-off-by: Pavel Skripkin Link: https://lore.kernel.org/r/f12fb1faa4eccf0f355788225335eb4309ff2599.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: mdiobus: Fix memory leak in __mdiobus_register

2021-10-27T07:51:41+00:00

commit ab609f25d19858513919369ff3d9a63c02cd9e2e upstream. Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it will cause memory leak. BUG: memory leak unreferenced object 0xffff888114032e00 (size 256): comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................ 08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve..... backtrace: [] kmalloc include/linux/slab.h:591 [inline] [] kzalloc include/linux/slab.h:721 [inline] [] device_private_init drivers/base/core.c:3203 [inline] [] device_add+0x89b/0xdf0 drivers/base/core.c:3253 [] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537 [] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [] call_driver_probe drivers/base/dd.c:517 [inline] [] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [] really_probe drivers/base/dd.c:558 [inline] [] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [] __device_attach+0x122/0x260 drivers/base/dd.c:969 [] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [] device_add+0x5fb/0xdf0 drivers/base/core.c:3359 [] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170 [] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 BUG: memory leak unreferenced object 0xffff888116f06900 (size 32): comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s) hex dump (first 32 bytes): 75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kstrdup+0x36/0x70 mm/util.c:60 [] kstrdup_const+0x53/0x80 mm/util.c:83 [] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48 [] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289 [] dev_set_name+0x63/0x90 drivers/base/core.c:3147 [] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535 [] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [] call_driver_probe drivers/base/dd.c:517 [inline] [] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [] really_probe drivers/base/dd.c:558 [inline] [] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [] __device_attach+0x122/0x260 drivers/base/dd.c:969 Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Signed-off-by: Yanfei Xu Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: bcm7xxx: Fixed indirect MMD operations

2021-10-17T08:08:33+00:00

commit d88fd1b546ff19c8040cfaea76bf16aed1c5a0bb upstream. When EEE support was added to the 28nm EPHY it was assumed that it would be able to support the standard clause 45 over clause 22 register access method. It turns out that the PHY does not support that, which is the very reason for using the indirect shadow mode 2 bank 3 access method. Implement {read,write}_mmd to allow the standard PHY library routines pertaining to EEE querying and configuration to work correctly on these PHYs. This forces us to implement a __phy_set_clr_bits() function that does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd functions are always called with that lock held. Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY") [florian: adjust locking since phy_{read,write}_mmd are called with no PHYLIB locks held] Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

phy: mdio: fix memory leak

2021-10-17T08:08:32+00:00

[ Upstream commit ca6e11c337daf7925ff8a2aac8e84490a8691905 ] Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. Link: https://lore.kernel.org/netdev/YVMRWNDZDUOvQjHL@shell.armlinux.org.uk/ Fixes: 46abc02175b3 ("phylib: give mdio buses a device tree presence") Reported-and-tested-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Reviewed-by: Dan Carpenter Signed-off-by: Pavel Skripkin Link: https://lore.kernel.org/r/eceae1429fbf8fa5c73dd2a0d39d525aa905074d.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: mdio: introduce a shutdown method to mdio device drivers

2021-10-09T12:09:45+00:00

[ Upstream commit cf9579976f724ad517cc15b7caadea728c7e245c ] MDIO-attached devices might have interrupts and other things that might need quiesced when we kexec into a new kernel. Things are even more creepy when those interrupt lines are shared, and in that case it is absolutely mandatory to disable all interrupt sources. Moreover, MDIO devices might be DSA switches, and DSA needs its own shutdown method to unlink from the DSA master, which is a new requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"). So introduce a ->shutdown method in the MDIO device driver structure. Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ptp: dp83640: don't define PAGE0

2021-09-22T09:45:33+00:00

commit 7366c23ff492ad260776a3ee1aaabba9fc773a8b upstream. Building dp83640.c on arch/parisc/ produces a build warning for PAGE0 being redefined. Since the macro is not used in the dp83640 driver, just make it a comment for documentation purposes. In file included from ../drivers/net/phy/dp83640.c:23: ../drivers/net/phy/dp83640_reg.h:8: warning: "PAGE0" redefined 8 | #define PAGE0 0x0000 from ../drivers/net/phy/dp83640.c:11: ../arch/parisc/include/asm/page.h:187: note: this is the location of the previous definition 187 | #define PAGE0 ((struct zeropage *)__PAGE_OFFSET) Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by: Randy Dunlap Reported-by: Geert Uytterhoeven Cc: Richard Cochran Cc: John Stultz Cc: Heiner Kallweit Cc: Russell King Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20210913220605.19682-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman