kernel/linux.git/drivers/net/phy, branch v3.18.62

net: phy: fix marvell phy status reading

2017-06-29T07:12:24+00:00

commit 898805e0cdf7fd860ec21bf661d3a0285a3defbd upstream. The Marvell driver incorrectly provides phydev->lp_advertising as the logical and of the link partner's advert and our advert. This is incorrect - this field is supposed to store the link parter's unmodified advertisment. This allows ethtool to report the correct link partner auto-negotiation status. Fixes: be937f1f89ca ("Marvell PHY m88e1111 driver fix") Signed-off-by: Russell King Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

net: phy: handle state correctly in phy_stop_machine

2017-05-08T05:44:08+00:00

[ Upstream commit 49d52e8108a21749dc2114b924c907db43358984 ] If the PHY is halted on stop, then do not set the state to PHY_UP. This ensures the phy will be restarted later in phy_start when the machine is started again. Fixes: 00db8189d984 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.") Signed-off-by: Nathan Sullivan Signed-off-by: Brad Mouring Acked-by: Xander Huff Acked-by: Kyle Roeschley Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

broadcom: fix PHY_ID_BCM5481 entry in the id table

2015-12-14T17:19:26+00:00

[ Upstream commit 3c25a860d17b7378822f35d8c9141db9507e3beb ] Commit fcb26ec5b18d ("broadcom: move all PHY_ID's to header") updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0 with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting the original). Fix that. Fixes: fcb26ec5b18d ("broadcom: move all PHY_ID's to header") Signed-off-by: Aaro Koskinen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: fix phy link up when limiting speed via device tree

2015-07-05T14:13:00+00:00

[ Upstream commit eb686231fce3770299760f24fdcf5ad041f44153 ] When limiting phy link speed using "max-speed" to 100mbps or less on a giga bit phy, phy never completes auto negotiation and phy state machine is held in PHY_AN. Fixing this issue by comparing the giga bit advertise though phydev->supported doesn't have it but phy has BMSR_ESTATEN set. So that auto negotiation is restarted as old and new advertise are different and link comes up fine. Signed-off-by: Mugunthan V N Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dp83640: fix improper double spin locking.

2015-06-15T18:26:51+00:00

[ Upstream commit adbe088f6f8b0b7701fe07f51fe6f2bd602a6665 ] A pair of nested spin locks was introduced in commit 63502b8d0 "dp83640: Fix receive timestamp race condition". Unfortunately the 'flags' parameter was reused for the inner lock, clobbering the originally saved IRQ state. This patch fixes the issue by changing the inner lock to plain spin_lock without irqsave. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dp83640: reinforce locking rules.

2015-06-15T18:26:51+00:00

[ Upstream commit a935865c828c8cd20501f618c69f659a5b6d6a5f ] Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dp83640: fix broken calibration routine.

2015-06-15T18:26:51+00:00

[ Upstream commit 397a253af5031de4a4612210055935309af4472c ] Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: Allow EEE for all RGMII variants

2015-06-15T18:26:49+00:00

[ Upstream commit 7e14069651591c81046ffaec13c3dac8cb70f5fb ] RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: Fix verification of EEE support in phy_init_eee

2015-03-14T19:37:11+00:00

[ Upstream commit 54da5a8be3c1e924c35480eb44c6e9b275f6444e ] phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex) to find a valid entry in the settings array for the given speed and duplex value. For full duplex 1000baseT, this will return the first matching entry, which is the entry for 1000baseKX_Full. If the phy eee does not support 1000baseKX_Full, this entry will not match, causing phy_init_eee to fail for no good reason. Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support") Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array") Cc: Giuseppe Cavallaro Signed-off-by: Guenter Roeck Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ptp: fix time stamp matching logic for VLAN packets.

2014-11-12T20:06:17+00:00

Commit ae5c6c6d "ptp: Classify ptp over ip over vlan packets" changed the code in two drivers that matches time stamps with PTP frames, with the goal of allowing VLAN tagged PTP packets to receive hardware time stamps. However, that commit failed to account for the VLAN header when parsing IPv4 packets. This patch fixes those two drivers to correctly match VLAN tagged IPv4/UDP PTP messages with their time stamps. This patch should also be applied to v3.17. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller