kernel/linux.git/drivers/net/phy/phy_device.c, branch v5.9.12

net: phy: Avoid NPD upon phy_detach() when driver is unbound

2020-09-17T23:55:35+00:00

If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: call phy_disable_interrupts() in phy_attach_direct() instead

2020-09-10T19:57:08+00:00

Since the micrel phy driver calls phy_init_hw() as a workaround, the commit 9886a4dbd2aa ("net: phy: call phy_disable_interrupts() in phy_init_hw()") disables the interrupt unexpectedly. So, call phy_disable_interrupts() in phy_attach_direct() instead. Otherwise, the phy cannot link up after the ethernet cable was disconnected. Note that other drivers (like at803x.c) also calls phy_init_hw(). So, perhaps, the driver caused a similar issue too. Fixes: 9886a4dbd2aa ("net: phy: call phy_disable_interrupts() in phy_init_hw()") Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

net: phy: fix memory leak in device-create error path

2020-08-08T21:11:42+00:00

A recent commit introduced a late error path in phy_device_create() which fails to release the device name allocated by dev_set_name(). Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Cc: Heiner Kallweit Signed-off-by: Johan Hovold Signed-off-by: David S. Miller

net: phy: fix check in get_phy_c45_ids

2020-07-23T00:01:36+00:00

After the patch below, the iteration through the available MMDs is completely short-circuited, and devs_in_pkg remains set to the initial value of zero. Due to devs_in_pkg being zero, the rest of get_phy_c45_ids() is short-circuited too: the following loop never reaches below this point either (it executes "continue" for every device in package, failing to retrieve PHY ID for any of them): /* Now probe Device Identifiers for each device present. */ for (i = 1; i < num_ids; i++) { if (!(devs_in_pkg & (1 << i))) continue; So c45_ids->device_ids remains populated with zeroes. This causes an Aquantia AQR412 PHY (same as any C45 PHY would, in fact) to be probed by the Generic PHY driver. The issue seems to be a case of submitting partially committed work (and therefore testing something other than was submitted). The intention of the patch was to delay exiting the loop until one more condition is reached (the devs_in_pkg read from hardware is either 0, OR mostly f's). So fix the patch to reflect that. Tested with traffic on a LS1028A-QDS, the PHY is now probed correctly using the Aquantia driver. The devs_in_pkg bit field is set to 0xe000009a, and the MMDs that are present have the following IDs: [ 5.600772] libphy: get_phy_c45_ids: device_ids[1]=0x3a1b662 [ 5.618781] libphy: get_phy_c45_ids: device_ids[3]=0x3a1b662 [ 5.630797] libphy: get_phy_c45_ids: device_ids[4]=0x3a1b662 [ 5.654535] libphy: get_phy_c45_ids: device_ids[7]=0x3a1b662 [ 5.791723] libphy: get_phy_c45_ids: device_ids[29]=0x3a1b662 [ 5.804050] libphy: get_phy_c45_ids: device_ids[30]=0x3a1b662 [ 5.816375] libphy: get_phy_c45_ids: device_ids[31]=0x0 [ 7.690237] mscc_felix 0000:00:00.5: PHY [0.5:00] driver [Aquantia AQR412] (irq=POLL) [ 7.704739] mscc_felix 0000:00:00.5: PHY [0.5:01] driver [Aquantia AQR412] (irq=POLL) [ 7.718918] mscc_felix 0000:00:00.5: PHY [0.5:02] driver [Aquantia AQR412] (irq=POLL) [ 7.733044] mscc_felix 0000:00:00.5: PHY [0.5:03] driver [Aquantia AQR412] (irq=POLL) Fixes: bba238ed037c ("net: phy: continue searching for C45 MMDs even if first returned ffff:ffff") Reported-by: Colin King Reported-by: Ioana Ciornei Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: continue searching for C45 MMDs even if first returned ffff:ffff

2020-07-17T17:22:50+00:00

At the time of introduction, in commit bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK"), support for the Lynx PCS inside Felix was relying, for USXGMII support, on the fact that get_phy_device() is able to parse the Lynx PCS "device-in-package" registers for this C45 MDIO device and identify it correctly. However, this was actually working somewhat by mistake (in the sense that, even though it was detected, it was detected for the wrong reasons). The get_phy_c45_ids() function works by iterating through all MMDs starting from 1 (MDIO_MMD_PMAPMD) and stops at the first one which returns a non-zero value in the "device-in-package" register pair, proceeding to see what that non-zero value is. For the Felix PCS, the first MMD (1, for the PMA/PMD) returns a non-zero value of 0xffffffff in the "device-in-package" registers. There is a code branch which is supposed to treat this case and flag it as wrong, and normally, this would have caught my attention when adding initial support for this PCS: if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) { /* If mostly Fs, there is no device there, then let's probe * MMD 0, as some 10G PHYs have zero Devices In package, * e.g. Cortina CS4315/CS4340 PHY. */ However, this code never actually kicked in, it seems, because this snippet from get_phy_c45_devs_in_pkg() was basically sabotaging itself, by returning 0xfffffffe instead of 0xffffffff: /* Bit 0 doesn't represent a device, it indicates c22 regs presence */ *devices_in_package &= ~BIT(0); Then the rest of the code just carried on thinking "ok, MMD 1 (PMA/PMD) says that there are 31 devices in that package, each having a device id of ffff:ffff, that's perfectly fine, let's go ahead and probe this PHY device". But after cleanup commit 320ed3bf9000 ("net: phy: split devices_in_package"), this got "fixed", and now devs_in_pkg is no longer 0xfffffffe, but 0xffffffff. So now, get_phy_device is returning -ENODEV for the Lynx PCS, because the semantics have remained mostly unchanged: the loop stops at the first MMD that returns a non-zero value, and that is MMD 1. But the Lynx PCS is simply a clause 37 PCS which implements the required MAC-side functionality for USXGMII (when operated in C45 mode, which is where C45 devices-in-package detection is relevant to). Of course it will fail the PMD/PMA test (MMD 1), since it is not a PHY. But it does implement detection for MDIO_MMD_PCS (3): - MDIO_DEVS1=0x008a, MDIO_DEVS2=0x0000, - MDIO_DEVID1=0x0083, MDIO_DEVID2=0xe400 Let get_phy_c45_ids() continue searching for valid MMDs, and don't assume that every phy_device has a PMA/PMD MMD implemented. Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: Define PHY statistics ethtool_phy_ops

2020-07-08T19:39:05+00:00

Extend ethtool_phy_ops to include the 3 function pointers necessary for implementing PHY statistics. In a subsequent change we will uninline those functions. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: Register ethtool PHY operations

2020-07-07T22:41:04+00:00

Utilize ethtool_set_ethtool_phy_ops to register a suitable set of PHY ethtool operations in a dynamic fashion such that ethtool will no longer directy reference PHY library symbols. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: Make phy_10gbit_fec_features_array static

2020-07-07T19:47:10+00:00

This array is not used outside of phy_device.c, so make it static. Reviewed-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: Properly define genphy_c45_driver

2020-07-07T19:47:10+00:00

Avoid the W=1 warning that symbol 'genphy_c45_driver' was not declared. Should it be static? Declare it on the phy header file. Reviewed-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller