kernel/linux.git/drivers/net/phy/phy_device.c, branch v4.19.112

net: phy: fix MDIO bus PM PHY resuming

2020-03-18T06:14:17+00:00

[ Upstream commit 611d779af7cad2b87487ff58e4931a90c20b113c ] So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends") Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: Avoid multiple suspends

2020-03-18T06:14:10+00:00

commit 503ba7c6961034ff0047707685644cad9287c226 upstream. It is currently possible for a PHY device to be suspended as part of a network device driver's suspend call while it is still being attached to that net_device, either via phy_suspend() or implicitly via phy_stop(). Later on, when the MDIO bus controller get suspended, we would attempt to suspend again the PHY because it is still attached to a network device. This is both a waste of time and creates an opportunity for improper clock/power management bugs to creep in. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

phy: Revert toggling reset changes.

2020-03-18T06:14:10+00:00

commit 7b566f70e1bf65b189b66eb3de6f431c30f7dff2 upstream. This reverts: ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached") 8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not attached") Andrew Lunn informs me that there are alternative efforts underway to fix this more properly. Signed-off-by: David S. Miller [just take the ef1b5bf506b1 revert - gregkh] Signed-off-by: Greg Kroah-Hartman

net: phy: don't clear BMCR in genphy_soft_reset

2020-01-27T13:50:34+00:00

[ Upstream commit d29f5aa0bc0c321e1b9e4658a2a7e08e885da52a ] So far we effectively clear the BMCR register. Some PHY's can deal with this (e.g. because they reset BMCR to a default as part of a soft-reset) whilst on others this causes issues because e.g. the autoneg bit is cleared. Marvell is an example, see also thread [0]. So let's be a little bit more gentle and leave all bits we're not interested in as-is. This change is needed for PHY drivers to properly deal with the original patch. [0] https://marc.info/?t=155264050700001&r=1&w=2 Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Phil Reid Tested-by: liweihang Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: Fix not to call phy_resume() if PHY is not attached

2020-01-27T13:50:03+00:00

[ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ] This patch fixes an issue that mdio_bus_phy_resume() doesn't call phy_resume() if the PHY is not attached. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: initialise phydev speed and duplex sanely

2019-12-31T15:36:15+00:00

[ Upstream commit a5d66f810061e2dd70fb7a108dcd14e535bc639f ] When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by: Russell King Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: phy: Check against net_device being NULL

2019-07-26T07:14:02+00:00

[ Upstream commit 82c76aca81187b3d28a6fb3062f6916450ce955e ] In general, we don't want MAC drivers calling phy_attach_direct with the net_device being NULL. Add checks against this in all the functions calling it: phy_attach() and phy_connect_direct(). Signed-off-by: Ioana Ciornei Suggested-by: Andrew Lunn Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: consider latched link-down status in polling mode

2019-04-05T20:33:10+00:00

[ Upstream commit 93c0970493c71f264e6c3c7caf1ff24a9e1de786 ] The link status value latches link-down events. To get the current status we read the register twice in genphy_update_link(). There's a potential risk that we miss a link-down event in polling mode. This may cause issues if the user e.g. connects his machine to a different network. On the other hand reading the latched value may cause issues in interrupt mode. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up and triggers an interrupt. Interrupt handler reads link status, means it reads the latched "link is down" info. But there won't be another interrupt as long as link stays up, therefore phylib will never recognize that link is up. Deal with both scenarios by reading the register twice in interrupt mode only. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: Fix the issue that netif always links up after resuming

2019-01-09T16:38:32+00:00

[ Upstream commit 8742beb50f2db903d3b6d69ddd81d67ce9914453 ] Even though the link is down before entering hibernation, there is an issue that the network interface always links up after resuming from hibernation. If the link is still down before enabling the network interface, and after resuming from hibernation, the phydev->state is forcibly set to PHY_UP in mdio_bus_phy_restore(), and the link becomes up. In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend() calls phy_stop_machine(), and mdio_bus_phy_resume() calls phy_start_machine(). In resume sequence, it's enough to do the same as mdio_bus_phy_resume() because the state has been preserved. This patch fixes the issue by calling phy_start_machine() in mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume(). Fixes: bc87922ff59d ("phy: Move PHY PM operations into phy_device") Suggested-by: Heiner Kallweit Signed-off-by: Kunihiko Hayashi Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: don't allow __set_phy_supported to add unsupported modes

2018-12-17T08:24:27+00:00

[ Upstream commit d2a36971ef595069b7a600d1144c2e0881a930a1 ] Currently __set_phy_supported allows to add modes w/o checking whether the PHY supports them. This is wrong, it should never add modes but only remove modes we don't want to support. The commit marked as fixed didn't do anything wrong, it just copied existing functionality to the helper which is being fixed now. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman