kernel/linux.git/drivers/net/phy/phy_device.c, branch v4.14.2

net: phy: Fix truncation of large IRQ numbers in phy_attached_print()

2017-09-22T03:35:17+00:00

Given NR_IRQS is 2048 on sparc64, and even 32784 on alpha, 3 digits is not enough to represent interrupt numbers on all architectures. Hence PHY interrupt numbers may be truncated during printing. Increase the buffer size from 4 to 8 bytes to fix this. Fixes: 5e369aefdce4818c ("net: stmmac: Delete dead code for MDIO registration") Signed-off-by: Geert Uytterhoeven Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: stmmac: Delete dead code for MDIO registration

2017-09-05T21:36:18+00:00

This code is no longer used, the logging function was changed by commit fbca164776e4 ("net: stmmac: Use the right logging function in stmmac_mdio_register"). It was previously showing information about the type of the IRQ, if it's polled, ignored or a normal interrupt. As we don't want information loss, I have moved this code to phy_attached_print(). Fixes: fbca164776e4 ("net: stmmac: Use the right logging function in stmmac_mdio_register") Signed-off-by: Romain Perier Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-09-02T00:42:05+00:00

Three cases of simple overlapping changes. Signed-off-by: David S. Miller

net: phy: Deal with unbound PHY driver in phy_attached_print()

2017-08-22T21:49:06+00:00

Priit reported that stmmac was crashing with the trace below. This is because phy_attached_print() is called too early right after the PHY device has been found, but before it has a driver attached, since that is only done in phy_probe() which occurs later. Fix this by dealing with a possibly NULL phydev->drv point since that can happen here, but could also happen if we voluntarily did an unbind of the PHY device with the PHY driver. sun7i-dwmac 1c50000.ethernet: PTP uses main clock sun7i-dwmac 1c50000.ethernet: no reset control found sun7i-dwmac 1c50000.ethernet: no regulator found sun7i-dwmac 1c50000.ethernet: Ring mode enabled sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported sun7i-dwmac 1c50000.ethernet: Normal descriptors libphy: stmmac: probed Unable to handle kernel NULL pointer dereference at virtual address 00000048 pgd = c0004000 [00000048] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc6-00318-g0065bd7fa384 #1 Hardware name: Allwinner sun7i (A20) Family task: ee868000 task.stack: ee85c000 PC is at phy_attached_print+0x1c/0x8c LR is at stmmac_mdio_register+0x12c/0x200 pc : [] lr : [] psr: 60000013 sp : ee85ddc8 ip : 00000000 fp : c07dfb5c r10: ee981210 r9 : 00000001 r8 : eea73000 r7 : eeaa6dd0 r6 : eeb49800 r5 : 00000000 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eeb49800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xee85c210) Stack: (0xee85ddc8 to 0xee85e000) ddc0: 00000000 00000002 eeb49400 eea72000 00000000 eeb49400 dde0: c045e6b4 00000000 ffffffff eeab0810 00000000 c08051f8 ee9292c0 c016d480 de00: eea725c0 eea73000 eea72000 00000001 eea726c0 c0457d0c 00000040 00000020 de20: 00000000 c045b850 00000001 00000000 ee981200 eeab0810 eeaa6ed0 ee981210 de40: 00000000 c094a4a0 00000000 c0465180 eeaa7550 f08d0000 c9ffb90c 00000032 de60: fffffffa 00000032 ee981210 ffffffed c0a46620 fffffdfb c0a46620 c03f7be8 de80: ee981210 c0a9a388 00000000 00000000 c0a46620 c03f63e0 ee981210 c0a46620 dea0: ee981244 00000000 00000007 000000c6 c094a4a0 c03f6534 00000000 c0a46620 dec0: c03f6490 c03f49ec ee828a58 ee9217b4 c0a46620 eeaa4b00 c0a43230 c03f59fc dee0: c08051f8 c094a49c c0a46620 c0a46620 00000000 c091c668 c093783c c03f6dfc df00: ffffe000 00000000 c091c668 c010177c eefe0938 eefe0935 c085e200 000000c6 df20: 00000005 c0136bc8 60000013 c080b3a4 00000006 00000006 c07ce7b4 00000000 df40: c07d7ddc c07cef28 eefe0938 eefe093e c0a0b2f0 c0a641c0 c0a641c0 c0a641c0 df60: c0937834 00000007 000000c6 c094a4a0 00000000 c0900d88 00000006 00000006 df80: 00000000 c09005a8 00000000 c060ecf4 00000000 00000000 00000000 00000000 dfa0: 00000000 c060ecfc 00000000 c0107738 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffdeffff ffffffff [] (phy_attached_print) from [] (stmmac_mdio_register+0x12c/0x200) [] (stmmac_mdio_register) from [] (stmmac_dvr_probe+0x850/0x96c) [] (stmmac_dvr_probe) from [] (sun7i_gmac_probe+0x120/0x180) [] (sun7i_gmac_probe) from [] (platform_drv_probe+0x50/0xac) [] (platform_drv_probe) from [] (driver_probe_device+0x234/0x2e4) [] (driver_probe_device) from [] (__driver_attach+0xa4/0xa8) [] (__driver_attach) from [] (bus_for_each_dev+0x4c/0x9c) [] (bus_for_each_dev) from [] (bus_add_driver+0x190/0x214) [] (bus_add_driver) from [] (driver_register+0x78/0xf4) [] (driver_register) from [] (do_one_initcall+0x44/0x168) [] (do_one_initcall) from [] (kernel_init_freeable+0x144/0x1d0) [] (kernel_init_freeable) from [] (kernel_init+0x8/0x110) [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) Code: e59021c8 e59d401c e590302c e3540000 (e5922048) ---[ end trace 39ae87c7923562d0 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Tested-By: Priit Laes Fixes: fbca164776e4 ("net: stmmac: Use the right logging function in stmmac_mdio_register") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

phylink: add phylink infrastructure

2017-08-07T03:55:29+00:00

The link between the ethernet MAC and its PHY has become more complex as the interface evolves. This is especially true with serdes links, where the part of the PHY is effectively integrated into the MAC. Serdes links can be connected to a variety of devices, including SFF modules soldered down onto the board with the MAC, a SFP cage with a hotpluggable SFP module which may contain a PHY or directly modulate the serdes signals onto optical media with or without a PHY, or even a classical PHY connection. Moreover, the negotiation information on serdes links comes in two varieties - SGMII mode, where the PHY provides its speed/duplex/flow control information to the MAC, and 1000base-X mode where both ends exchange their abilities and each resolve the link capabilities. This means we need a more flexible means to support these arrangements, particularly with the hotpluggable nature of SFP, where the PHY can be attached or detached after the network device has been brought up. Ethtool information can come from multiple sources: - we may have a PHY operating in either SGMII or 1000base-X mode, in which case we take ethtool/mii data directly from the PHY. - we may have a optical SFP module without a PHY, with the MAC operating in 1000base-X mode - the ethtool/mii data needs to come from the MAC. - we may have a copper SFP module with a PHY whic can't be accessed, which means we need to take ethtool/mii data from the MAC. Phylink aims to solve this by providing an intermediary between the MAC and PHY, providing a safe way for PHYs to be hotplugged, and allowing a SFP driver to reconfigure the serdes connection. Phylink also takes over support of fixed link connections, where the speed/duplex/flow control are fixed, but link status may be controlled by a GPIO signal. By avoiding the fixed-phy implementation, phylink can provide a faster response to link events: fixed-phy has to wait for phylib to operate its state machine, which can take several seconds. In comparison, phylink takes milliseconds. Signed-off-by: Russell King - remove sync status - rework supported and advertisment handling - add 1000base-x speed for fixed links - use functionality exported from phy-core, reworking __phylink_ethtool_ksettings_set for it Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: provide a hook for link up/link down events

2017-08-07T03:55:28+00:00

Sometimes, we need to do additional work between the PHY coming up and marking the carrier present - for example, we may need to wait for the PHY to MAC link to finish negotiation. This changes phylib to provide a notification function pointer which avoids the built-in netif_carrier_on() and netif_carrier_off() functions. Standard ->adjust_link functionality is provided by hooking a helper into the new ->phy_link_change method. Reviewed-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: David S. Miller

net: phy: Add phy loopback support in net phy framework

2017-07-03T09:01:15+00:00

This patch add set_loopback in phy_driver, which is used by MAC driver to enable or disable phy loopback. it also add a generic genphy_loopback function, which use BMCR loopback bit to enable or disable loopback. Signed-off-by: Lin Yun Sheng Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: split out 10G genphy support

2017-06-07T01:14:13+00:00

Move the old 10G genphy support to sit beside the new clause 45 library functions, so all the 10G phy code is together. Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: David S. Miller

net: phy: add 802.3 clause 45 support to phylib

2017-06-07T01:14:13+00:00

Add generic helpers for 802.3 clause 45 PHYs for >= 10Gbps support. Reviewed-by: Andrew Lunn Signed-off-by: Russell King Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: Relax error checking on sysfs_create_link()

2017-05-27T23:58:15+00:00

Some Ethernet drivers will attach/connect to a PHY device before calling register_netdevice() which is responsible for calling netdev_register_kobject() which would do the network device's kobject initialization. In such a case, sysfs_create_link() would return -ENOENT because the network device's kobject is not ready yet, and we would fail to connect to the PHY device. In order to keep things simple and symetrical, we just take the success path as indicative of the ability to access the network device's kobject, and create the second link if that's the case. Fixes: 5568363f0cb3 ("net: phy: Create sysfs reciprocal links for attached_dev/phydev") Reported-by: Woojung Hung Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller