kernel/linux.git/drivers/net/phy/phy.c, branch v5.10.78

phy: phy_ethtool_ksettings_set: Lock the PHY while changing settings

2021-11-02T18:48:24+00:00

commit af1a02aa23c37045e6adfcf074cf7dbac167a403 upstream. There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll Suggested-by: Walter Stoll Tested-by: Walter Stoll Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

phy: phy_start_aneg: Add an unlocked version

2021-11-02T18:48:24+00:00

commit 707293a56f95f8e7e0cfae008010c7933fb68973 upstream. Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

phy: phy_ethtool_ksettings_set: Move after phy_start_aneg

2021-11-02T18:48:23+00:00

commit 64cd92d5e8180c2ded3fdea76862de6f596ae2c9 upstream. This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

phy: phy_ethtool_ksettings_get: Lock the phy for consistency

2021-11-02T18:48:23+00:00

commit c10a485c3de5ccbf1fff65a382cebcb2730c6b06 upstream. The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: introduce phydev->port

2021-03-30T12:32:05+00:00

[ Upstream commit 4217a64e18a1647a0dbc68cb3169a5a06f054ec8 ] At the moment, PORT_MII is reported in the ethtool ops. This is odd because it is an interface between the MAC and the PHY and no external port. Some network card drivers will overwrite the port to twisted pair or fiber, though. Even worse, the MDI/MDIX setting is only used by ethtool if the port is twisted pair. Set the port to PORT_TP by default because most PHY drivers are copper ones. If there is fibre support and it is enabled, the PHY driver will set it to PORT_FIBRE. This will change reporting PORT_MII to either PORT_TP or PORT_FIBRE; except for the genphy fallback driver. Suggested-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: fix save wrong speed and duplex problem if autoneg is on

2021-03-17T16:06:12+00:00

commit d9032dba5a2b2bbf0fdce67c8795300ec9923b43 upstream. If phy uses generic driver and autoneg is on, enter command "ethtool -s eth0 speed 50" will not change phy speed actually, but command "ethtool eth0" shows speed is 50Mb/s because phydev->speed has been set to 50 and no update later. And duplex setting has same problem too. However, if autoneg is on, phy only changes speed and duplex according to phydev->advertising, but not phydev->speed and phydev->duplex. So in this case, phydev->speed and phydev->duplex don't need to be set in function phy_ethtool_ksettings_set() if autoneg is on. Fixes: 51e2a3846eab ("PHY: Avoid unnecessary aneg restarts") Signed-off-by: Guangbin Huang Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: Document core PHY structures

2020-09-24T01:02:49+00:00

Add kerneldoc for the core PHY data structures, a few inline functions and exported functions which are not already documented. v2 Typos g/phy/PHY/s Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: Do not warn in phy_stop() on PHY_DOWN

2020-09-17T23:55:35+00:00

When phy_is_started() was added to catch incorrect PHY states, phy_stop() would not be qualified against PHY_DOWN. It is possible to reach that state when the PHY driver has been unbound and the network device is then brought down. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

net: phy: Uninline PHY ethtool statistics operations

2020-07-08T19:39:05+00:00

Now that we have moved the PHY ethtool statistics to be dynamically registered, we no longer need to inline those for ethtool. This used to be done to avoid cross symbol referencing and allow ethtool to be decoupled from PHYLIB entirely. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller