kernel/linux.git/drivers/net/phy/phy.c, branch v4.14.85

net: phy: consider PHY_IGNORE_INTERRUPT in phy_start_aneg_priv

2018-07-28T05:55:42+00:00

[ Upstream commit 215d08a85b9acf5e1fe9dbf50f1774cde333efef ] The situation described in the comment can occur also with PHY_IGNORE_INTERRUPT, therefore change the condition to include it. Fixes: f555f34fdc58 ("net: phy: fix auto-negotiation stall due to unavailable interrupt") Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: Tell caller result of phy_change()

2018-03-31T16:10:39+00:00

[ Upstream commit a2c054a896b8ac794ddcfc7c92e2dc7ec4ed4ed5 ] In 664fcf123a30e (net: phy: Threaded interrupts allow some simplification) the phy_interrupt system was changed to use a traditional threaded interrupt scheme instead of a workqueue approach. With this change, the phy status check moved into phy_change, which did not report back to the caller whether or not the interrupt was handled. This means that, in the case of a shared phy interrupt, only the first phydev's interrupt registers are checked (since phy_interrupt() would always return IRQ_HANDLED). This leads to interrupt storms when it is a secondary device that's actually the interrupt source. Signed-off-by: Brad Mouring Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: Restore phy_resume() locking assumption

2018-03-19T07:42:44+00:00

commit 9c2c2e62df3fa30fb13fbeb7512a4eede729383b upstream. commit f5e64032a799 ("net: phy: fix resume handling") changes the locking semantics for phy_resume() such that the caller now needs to hold the phy mutex. Not all call sites were adopted to this new semantic, resulting in warnings from the added WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the semantics, add a __phy_resume() and restore the old behavior of phy_resume(). Reported-by: Heiner Kallweit Fixes: f5e64032a799 ("net: phy: fix resume handling") Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: fix resume handling

2018-03-19T07:42:43+00:00

[ Upstream commit f5e64032a799d4f54decc7eb6aafcdffb67f9ad9 ] When a PHY has the BMCR_PDOWN bit set, it may decide to ignore writes to other registers, or reset the registers to power-on defaults. Micrel PHYs do this for their interrupt registers. The current structure of phylib tries to enable interrupts before resuming (and releasing) the BMCR_PDOWN bit. This fails, causing Micrel PHYs to stop working after a suspend/resume sequence if they are using interrupts. Fix this by ensuring that the PHY driver resume methods do not take the phydev->lock mutex themselves, but the callers of phy_resume() take that lock. This then allows us to move the call to phy_resume() before we enable interrupts in phy_start(). Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: phy: fix phy_start to consider PHY_IGNORE_INTERRUPT

2018-03-09T06:41:12+00:00

[ Upstream commit 08f5138512180a479ce6b9d23b825c9f4cd3be77 ] This condition wasn't adjusted when PHY_IGNORE_INTERRUPT (-2) was added long ago. In case of PHY_IGNORE_INTERRUPT the MAC interrupt indicates also PHY state changes and we should do what the symbol says. Fixes: 84a527a41f38 ("net: phylib: fix interrupts re-enablement in phy_start") Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phy: Keep reporting transceiver type

2017-09-21T22:20:40+00:00

With commit 2d55173e71b0 ("phy: add generic function to support ksetting support"), we lost the ability to report the transceiver type like we used to. Now that we have added back the transceiver type to ethtool_link_settings, we can report it back like we used to and have no loss of information. Fixes: 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-09-02T00:42:05+00:00

Three cases of simple overlapping changes. Signed-off-by: David S. Miller

Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"

2017-08-31T01:47:25+00:00

This reverts commit 7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()") because it is creating the possibility for a NULL pointer dereference. David Daney provide the following call trace and diagram of events: When ndo_stop() is called we call: phy_disconnect() +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL; +---> phy_stop_machine() | +---> phy_state_machine() | +----> queue_delayed_work(): Work queued. +--->phy_detach() implies: phydev->attached_dev = NULL; Now at a later time the queued work does: phy_state_machine() +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL: CPU 12 Unable to handle kernel paging request at virtual address 0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c Oops[#1]: CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1 Workqueue: events_power_efficient phy_state_machine task: 80000004021ed100 task.stack: 8000000409d70000 $ 0 : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004 $ 4 : 0000000000000000 0000000000000001 0000000000000004 0000000000000000 $ 8 : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000 $12 : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b $16 : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800 $20 : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008 $24 : 0000000000000061 ffffffff808637b0 $28 : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c Hi : 000000000000002a Lo : 000000000000003f epc : ffffffff80de37ec netif_carrier_off+0xc/0x58 ra : ffffffff80c7804c phy_state_machine+0x48c/0x4f8 Status: 14009ce3 KX SX UX KERNEL EXL IE Cause : 00800008 (ExcCode 02) BadVA : 0000000000000048 PrId : 000d9501 (Cavium Octeon III) Modules linked in: Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000, task=80000004021ed100, tls=0000000000000000) Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00 0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300 80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001 ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000 8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000 ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240 0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00 8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8 8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08 8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080 ... Call Trace: [] netif_carrier_off+0xc/0x58 [] phy_state_machine+0x48c/0x4f8 [] process_one_work+0x158/0x368 [] worker_thread+0x150/0x4c0 [] kthread+0xc8/0xe0 [] ret_from_kernel_thread+0x14/0x1c The original motivation for this change originated from Marc Gonzales indicating that his network driver did not have its adjust_link callback executing with phydev->link = 0 while he was expecting it. PHYLIB has never made any such guarantees ever because phy_stop() merely just tells the workqueue to move into PHY_HALTED state which will happen asynchronously. Reported-by: Geert Uytterhoeven Reported-by: David Daney Fixes: 7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: export phy_start_machine() for phylink

2017-08-07T03:55:28+00:00

phylink will need phy_start_machine exported, so lets export it as a GPL symbol. Documentation/networking/phy.txt indicates that this should be a PHY API function. Reviewed-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: David S. Miller

net: phy: provide a hook for link up/link down events

2017-08-07T03:55:28+00:00

Sometimes, we need to do additional work between the PHY coming up and marking the carrier present - for example, we may need to wait for the PHY to MAC link to finish negotiation. This changes phylib to provide a notification function pointer which avoids the built-in netif_carrier_on() and netif_carrier_off() functions. Standard ->adjust_link functionality is provided by hooking a helper into the new ->phy_link_change method. Reviewed-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: David S. Miller