kernel/linux.git/drivers/net/phy/broadcom.c, branch v4.11.5

net: phy: broadcom: rehook BCM54612E specific init

2017-02-01T19:20:20+00:00

This extra BCM54612E code in PHY driver isn't really aneg specific. Even without it aneg works OK but the problem is no packets pass through PHY. Moreover putting this code inside config_aneg callback didn't allow resuming PHY correctly. When driver called phy_stop and phy_start it was putting PHY machine into RESUMING state. After that machine was switching into AN and NOLINK without ever calling phy_start_aneg. This prevented this extra setup from being called and PHY didn't work. This change has been verified to fix network on BCM47186B0 SoC device with BCM54612E. Signed-off-by: Rafał Miłecki Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: broadcom: add support for BCM54210E

2017-01-27T16:29:18+00:00

It's Broadcom PHY simply described as single-port RGMII 10/100/1000BASE-T PHY. It requires disabling delay skew and GTXCLK bits. Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller

net: phy: broadcom: drop duplicated define for RGMII SKEW delay

2017-01-26T04:13:44+00:00

We had two defines for the same bit (both were used with the MII_BCM54XX_AUXCTL_SHDWSEL_MISC register). Signed-off-by: Rafał Miłecki Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: broadcom: use auxctl reading helper in BCM54612E code

2017-01-26T04:13:44+00:00

Starting with commit 5b4e29005123 ("net: phy: broadcom: add bcm54xx_auxctl_read") we have a reading helper so use it and avoid code duplication. It also means we don't need MII_BCM54XX_AUXCTL_SHDWSEL_MISC define as it's the same as MII_BCM54XX_AUXCTL_SHDWSEL_MISC just for reading needs (same value shifted by 12 bits). Signed-off-by: Rafał Miłecki Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause

2016-12-11T04:31:19+00:00

Instead of having individual PHY drivers set the SUPPORTED_Pause and SUPPORTED_Asym_Pause flags, phylib itself should set those flags, unless there is a hardware erratum or other special case. During autonegotiation, the PHYs will determine whether to enable pause frame support. Pause frames are a feature that is supported by the MAC. It is the MAC that generates the frames and that processes them. The PHY can only be configured to allow them to pass through. This commit also effectively reverts the recently applied c7a61319 ("net: phy: dp83848: Support ethernet pause frames"). So the new process is: 1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause and SUPPORTED_AsymPause bits in phydev->supported. This indicates that the PHY supports pause frames. 2) The MAC driver checks phydev->supported before it calls phy_start(). If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver sets those bits in phydev->advertising, if it wants to enable pause frame support. 3) When the link state changes, the MAC driver checks phydev->pause and phydev->asym_pause, If the bits are set, then it enables the corresponding features in the MAC. The algorithm is: if (phydev->pause) The MAC should be programmed to receive and honor pause frames it receives, i.e. enable receive flow control. if (phydev->pause != phydev->asym_pause) The MAC should be programmed to transmit pause frames when needed, i.e. enable transmit flow control. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller

net: phy: broadcom: Move bcm54xx_auxctl_{read, write} to common library

2016-11-24T20:45:53+00:00

We are going to need these functions to implement support for Broadcom Wirespeed, aka downshift. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: broadcom: Add BCM54810 PHY entry

2016-11-07T18:11:22+00:00

The BCM54810 PHY requires some semi-unique configuration, which results in some additional configuration in addition to the standard config. Also, some users of the BCM54810 require the PHY lanes to be swapped. Since there is no way to detect this, add a device tree query to see if it is applicable. Inspired-by: Vikas Soni Signed-off-by: Jon Mason Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: broadcom: add bcm54xx_auxctl_read

2016-11-07T18:11:21+00:00

Add a helper function to read the AUXCTL register for the BCM54xx. This mirrors the bcm54xx_auxctl_write function already present in the code. Signed-off-by: Jon Mason Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: broadcom: Add support for BCM54612E

2016-10-26T21:15:26+00:00

This PHY has internal delays enabled after reset. This clears the internal delay enables unless the interface specifically requests them. Signed-off-by: Xo Wang Reviewed-by: Florian Fainelli Reviewed-by: Joel Stanley Signed-off-by: David S. Miller

phy: Centralize setting driver module owner

2016-01-07T19:31:27+00:00

Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller