kernel/linux.git/drivers/net/phy/bcm-phy-lib.c, branch v5.10.264

net: phy: broadcom: Only advertise EEE for supported modes

2021-04-14T06:42:08+00:00

[ Upstream commit c056d480b40a68f2520ccc156c7fae672d69d57d ] We should not be advertising EEE for modes that we do not support, correct that oversight by looking at the PHY device supported linkmodes. Fixes: 99cec8a4dda2 ("net: phy: broadcom: Allow enabling or disabling of EEE") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: broadcom: don't export RDB/legacy access methods

2020-06-01T19:02:57+00:00

Don't export __bcm_phy_enable_rdb_access() and __bcm_phy_enable_legacy_access() functions. They aren't used outside this module and it was forgotten to provide a prototype for these functions. Just make them static for now. Fixes: 11ecf8c55b91 ("net: phy: broadcom: add cable test support") Reported-by: kbuild test robot Signed-off-by: Michael Walle Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: broadcom: add cable test support

2020-05-13T19:52:38+00:00

Most modern broadcom PHYs support ECD (enhanced cable diagnostics). Add support for it in the bcm-phy-lib so they can easily be used in the PHY driver. There are two access methods for ECD: legacy by expansion registers and via the new RDB registers which are exclusive. Provide functions in two variants where the PHY driver can choose from. To keep things simple for now, we just switch the register access to expansion registers in the RDB variant for now. On the flipside, we have to keep a bus lock to prevent any other non-legacy access on the PHY. The results of the intra-pair tests are inconclusive (at least for the BCM54140). Most of the times half the length is reported but sometimes the length is correct. Signed-off-by: Michael Walle Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: broadcom: add bcm_phy_modify_exp()

2020-05-13T19:52:38+00:00

Add the convenience function to do a read-modify-write. This has the additional benefit of saving one write to the selection register. Signed-off-by: Michael Walle Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: broadcom: add exp register access methods without buslock

2020-05-13T19:52:38+00:00

Add helper to read and write expansion registers without taking the mdio lock. Please note, that this changes the semantics of the read and write. Before there was no lock between selecting the expansion register and the actual read/write. This may lead to access failures if there are parallel accesses. Instead take the bus lock during the whole access cycle. Signed-off-by: Michael Walle Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: broadcom: add helper to write/read RDB registers

2020-04-22T19:14:18+00:00

RDB (Register Data Base) registers are used on newer Broadcom PHYs. Add helper to read, write and modify these registers. Signed-off-by: Michael Walle Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: bcm7xx: add jumbo frame configuration to PHY

2020-03-27T23:07:24+00:00

The BCM7XX PHY family requires special configuration to pass jumbo frames. Do that during initial PHY setup. Signed-off-by: Murali Krishna Policharla Reviewed-by: Scott Branden Signed-off-by: Vladimir Oltean Acked-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: Prepare for moving Omega out of bcm7xxx

2019-03-21T20:41:26+00:00

The Omega PHY entry was added to bcm7xxx.c out of convenience and this breaks the one driver per product line paradigm that was applied up until now. Since the AFE initialization is shared between Omega and BCM7xxx move the relevant functions to bcm-phy-lib.[ch]. No functional changes introduced. Signed-off-by: Florian Fainelli Reviewed-by: Scott Branden Signed-off-by: David S. Miller

net: phy: Remove redundent License text when SPDX header is present

2019-01-23T04:53:08+00:00

The SPDX header makes any license text redundent. Remove it. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: Convert some PHY and MDIO driver files to SPDX headers

2019-01-23T04:53:08+00:00

Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller