kernel/linux.git/drivers/net/phy/amd.c, branch v6.18.21

net: phy: Constify struct mdio_device_id

2025-01-14T23:01:32+00:00

'struct mdio_device_id' is not modified in these drivers. Constifying these structures moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 27014 12792 0 39806 9b7e drivers/net/phy/broadcom.o After: ===== text data bss dec hex filename 27206 12600 0 39806 9b7e drivers/net/phy/broadcom.o Signed-off-by: Christophe JAILLET Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/403c381b7d9156b67ad68ffc44b8eee70c5e86a9.1736691226.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski

net: phy: amd: Support the Altima AMI101L

2023-10-03T09:44:09+00:00

The Altima AC101L is obviously compatible with the AMD PHY, as seen by reading the datasheet. Datasheet: https://docs.broadcom.com/doc/AC101L-DS05-405-RDS.pdf Signed-off-by: Linus Walleij Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20230924-ac101l-phy-v1-1-5e6349e28aa4@linaro.org Signed-off-by: Paolo Abeni

net: phy: amd: remove the use of .ack_interrupt()

2020-11-17T19:37:00+00:00

In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Signed-off-by: Ioana Ciornei Signed-off-by: Jakub Kicinski

net: phy: amd: implement generic .handle_interrupt() callback

2020-11-17T19:37:00+00:00

In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Signed-off-by: Ioana Ciornei Signed-off-by: Jakub Kicinski

net: phy: switch drivers to use dynamic feature detection

2019-04-16T00:19:54+00:00

Recently genphy_read_abilities() has been added that dynamically detects clause 22 PHY abilities. I *think* this detection should work with all supported PHY's, at least for the ones with basic features sets, i.e. PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these features explicitly and rely on phylib feature detection. I don't have access to most of these PHY's, therefore I'd appreciate regression testing. v2: - make the feature constant a comment so that readers know which features are supported by the respective PHY Signed-off-by: Heiner Kallweit Tested-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: Convert some PHY and MDIO driver files to SPDX headers

2019-01-23T04:53:08+00:00

Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: remove flag PHY_HAS_INTERRUPT from driver configs

2018-11-11T17:36:56+00:00

Now that flag PHY_HAS_INTERRUPT has been replaced with a check for callbacks config_intr and ack_interrupt, we can remove setting this flag from all driver configs. Last but not least remove flag PHY_HAS_INTERRUPT completely. Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: remove generic settings for callbacks config_aneg and read_status from drivers

2017-12-01T20:42:21+00:00

Remove generic settings for callbacks config_aneg and read_status from drivers. Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

phy: Centralize setting driver module owner

2016-01-07T19:31:27+00:00

Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: replace phy_driver_register calls

2014-11-12T18:52:53+00:00

Replace module init/exit which only calls phy_driver_register with module_phy_driver macro. Compile tested only. Signed-off-by: Johan Hovold Signed-off-by: David S. Miller