kernel/linux.git/drivers/net/phy/Makefile, branch v6.12.80

net: phy: add Applied Micro QT2025 PHY driver

2024-08-30T09:27:35+00:00

This driver supports Applied Micro Circuits Corporation QT2025 PHY, based on a driver for Tehuti Networks TN40xx chips. The original driver for TN40xx chips supports multiple PHY hardware (AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120, 88X3310, and MV88E2010). This driver is extracted from the original driver and modified to a PHY driver in Rust. This has been tested with Edimax EN-9320SFP+ 10G network adapter. Reviewed-by: Trevor Gross Reviewed-by: Andrew Lunn Signed-off-by: FUJITA Tomonori Signed-off-by: David S. Miller

net: phy: Introduce ethernet link topology representation

2024-08-23T12:04:34+00:00

Link topologies containing multiple network PHYs attached to the same net_device can be found when using a PHY as a media converter for use with an SFP connector, on which an SFP transceiver containing a PHY can be used. With the current model, the transceiver's PHY can't be used for operations such as cable testing, timestamping, macsec offload, etc. The reason being that most of the logic for these configuration, coming from either ethtool netlink or ioctls tend to use netdev->phydev, which in multi-phy systems will reference the PHY closest to the MAC. Introduce a numbering scheme allowing to enumerate PHY devices that belong to any netdev, which can in turn allow userspace to take more precise decisions with regard to each PHY's configuration. The numbering is maintained per-netdev, in a phy_device_list. The numbering works similarly to a netdevice's ifindex, with identifiers that are only recycled once INT_MAX has been reached. This prevents races that could occur between PHY listing and SFP transceiver removal/insertion. The identifiers are assigned at phy_attach time, as the numbering depends on the netdevice the phy is attached to. The PHY index can be re-used for PHYs that are persistent. Signed-off-by: Maxime Chevallier Reviewed-by: Christophe Leroy Tested-by: Christophe Leroy Signed-off-by: David S. Miller

phy: Add Open Alliance helpers for the PHY framework

2024-08-16T17:16:26+00:00

Introduce helper functions specific to Open Alliance diagnostics, integrating them into the PHY framework. Currently, these helpers are limited to 1000BaseT1 specific TDR functionality. Signed-off-by: Oleksij Rempel Link: https://patch.msgid.link/20240812073046.1728288-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

net: revert partially applied PHY topology series

2024-05-14T01:35:02+00:00

The series is causing issues with PHY drivers built as modules. Since it was only partially applied and the merge window has opened let's revert and try again for v6.11. Revert 6916e461e793 ("net: phy: Introduce ethernet link topology representation") Revert 0ec5ed6c130e ("net: sfp: pass the phy_device when disconnecting an sfp module's PHY") Revert e75e4e074c44 ("net: phy: add helpers to handle sfp phy connect/disconnect") Revert fdd353965b52 ("net: sfp: Add helper to return the SFP bus name") Revert 841942bc6212 ("net: ethtool: Allow passing a phy index for some commands") Link: https://lore.kernel.org/all/171242462917.4000.9759453824684907063.git-patchwork-notify@kernel.org/ Link: https://lore.kernel.org/all/20240507102822.2023826-1-maxime.chevallier@bootlin.com/ Link: https://lore.kernel.org/r/20240513154156.104281-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: phy: Introduce ethernet link topology representation

2024-04-06T17:25:14+00:00

net: phy: air_en8811h: Add the Airoha EN8811H PHY driver

2024-03-29T19:06:44+00:00

Add the driver for the Airoha EN8811H 2.5 Gigabit PHY. The phy supports 100/1000/2500 Mbps with auto negotiation only. The driver uses two firmware files, for which updated versions are added to linux-firmware already. Note: At phy-address + 8 there is another device on the mdio bus, that belongs to the EN881H. While the original driver writes to it, Airoha has confirmed this is not needed. Therefore, communication with this device is not included in this driver. Signed-off-by: Eric Woudstra Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240326162305.303598-3-ericwouds@gmail.com Signed-off-by: Jakub Kicinski

net: phy: move at803x PHY driver to dedicated directory

2024-02-01T00:25:16+00:00

In preparation for addition of other Qcom PHY and to tidy things up, move the at803x PHY driver to dedicated directory. The same order in the Kconfig selection is saved. Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240129141600.2592-2-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski

Revert "Introduce PHY listing and link_topology tracking"

2024-01-05T00:05:47+00:00

This reverts commit 32bb4515e34469975abc936deb0a116c4a445817. This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a. This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1. This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8. This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf. This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6. This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b. This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5. This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113. This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e. This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a. This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34. This reverts commit 02018c544ef113e980a2349eba89003d6f399d22. Looks like we need more time for reviews, and incremental changes will be hard to make sense of. So revert. Link: https://lore.kernel.org/all/ZZP6FV5sXEf+xd58@shell.armlinux.org.uk/ Signed-off-by: Jakub Kicinski

net: phy: Introduce ethernet link topology representation

2024-01-01T18:38:56+00:00

Link topologies containing multiple network PHYs attached to the same net_device can be found when using a PHY as a media converter for use with an SFP connector, on which an SFP transceiver containing a PHY can be used. With the current model, the transceiver's PHY can't be used for operations such as cable testing, timestamping, macsec offload, etc. The reason being that most of the logic for these configuration, coming from either ethtool netlink or ioctls tend to use netdev->phydev, which in multi-phy systems will reference the PHY closest to the MAC. Introduce a numbering scheme allowing to enumerate PHY devices that belong to any netdev, which can in turn allow userspace to take more precise decisions with regard to each PHY's configuration. The numbering is maintained per-netdev, in a phy_device_list. The numbering works similarly to a netdevice's ifindex, with identifiers that are only recycled once INT_MAX has been reached. This prevents races that could occur between PHY listing and SFP transceiver removal/insertion. The identifiers are assigned at phy_attach time, as the numbering depends on the netdevice the phy is attached to. Signed-off-by: Maxime Chevallier Signed-off-by: David S. Miller

net: phy: nxp-c45-tja11xx: add MACsec support

2023-12-27T13:08:10+00:00

Add MACsec support. The MACsec block has four TX SCs and four RX SCs. The driver supports up to four SecY. Each SecY with one TX SC and one RX SC. The RX SCs can have two keys, key A and key B, written in hardware and enabled at the same time. The TX SCs can have two keys written in hardware, but only one can be active at a given time. On TX, the SC is selected using the MAC source address. Due of this selection mechanism, each offloaded netdev must have a unique MAC address. On RX, the SC is selected by SCI(found in SecTAG or calculated using MAC SA), or using RX SC 0 as implicit. Signed-off-by: Radu Pirea (NXP OSS) Signed-off-by: David S. Miller