kernel/linux.git/drivers/net/phy/Makefile, branch v6.1.168

net: phy: broadcom: Add PTP support for some Broadcom PHYs.

2022-06-24T03:49:02+00:00

This adds PTP support for BCM54210E Broadcom PHYs, in particular, the BCM54213PE, as used in the Rasperry PI CM4. It has only been tested on that hardware. Signed-off-by: Jonathan Lemon Acked-by: Richard Cochran Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY

2022-05-09T11:09:30+00:00

The DP83TD510E is an ultra-low power Ethernet physical layer transceiver that supports 10M single pair cable. This driver was tested with NXP SJA1105, STMMAC and ASIX AX88772B USB Ethernet controller. Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: adin1100: Add initial support for ADIN1100 industrial PHY

2022-05-01T16:45:35+00:00

The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. Signed-off-by: Alexandru Ardelean Signed-off-by: Alexandru Tachici Signed-off-by: David S. Miller

net: phy: add Maxlinear GPY115/21x/24x driver

2021-07-20T13:55:20+00:00

Add driver to support the Maxlinear GPY115, GPY211, GPY212, GPY215, GPY241, GPY245 PHYs. Separate from XWAY PHY driver because this series has different register layout and new features not supported in XWAY PHY. Signed-off-by: Xu Liang Acked-by: Hauke Mehrtens Tested-by: Wong Vee Khee Tested-by: Wong Vee Khee Signed-off-by: David S. Miller

net: phy: add driver for Motorcomm yt8511 phy

2021-05-21T20:19:11+00:00

Add a driver for the Motorcomm yt8511 phy that will be used in the production Pine64 rk3566-quartz64 development board. It supports gigabit transfer speeds, rgmii, and 125mhz clk output. Signed-off-by: Peter Geis Signed-off-by: David S. Miller

net: phy: add MediaTek Gigabit Ethernet PHY driver

2021-05-19T20:27:42+00:00

Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and MT7531 switches. The initialization procedure is from the vendor driver, but due to lack of documentation, the function of some register values remains unknown. Signed-off-by: DENG Qingfang Signed-off-by: David S. Miller

phy: nxp-c45: add driver for tja1103

2021-04-19T23:19:44+00:00

Add driver for tja1103 driver and for future NXP C45 PHYs. Signed-off-by: Radu Pirea (NXP OSS) Signed-off-by: David S. Miller

net: phy: add Marvell 88X2222 transceiver support

2021-03-15T21:50:28+00:00

Add basic support for the Marvell 88X2222 multi-speed ethernet transceiver. This PHY provides data transmission over fiber-optic as well as Twinax copper links. The 88X2222 supports 2 ports of 10GBase-R and 1000Base-X on the line-side interface. The host-side interface supports 4 ports of 10GBase-R, RXAUI, 1000Base-X and 2 ports of XAUI. This driver, however, supports only XAUI on the host-side and 1000Base-X/10GBase-R on the line-side, for now. The SGMII is also supported over 1000Base-X. Interrupts are not supported. Internal registers access compliant with the Clause 45 specification. Signed-off-by: Ivan Bornyakov Signed-off-by: David S. Miller

net: phy: Sort Kconfig and Makefile

2020-08-27T13:55:51+00:00

Sort the Kconfig based on the text shown in make menuconfig and sort the Makefile by CONFIG symbol. Acked-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: mdio: Move MDIO drivers into a new subdirectory

2020-08-27T13:55:50+00:00

Move all the MDIO drivers and multiplexers into drivers/net/mdio. The mdio core is however left in the phy directory, due to mutual dependencies between the MDIO core and the PHY core. Take this opportunity to sort the Kconfig based on the menuconfig strings, and move the multiplexers to the end with a separating comment. v2: Fix typo in commit message Acked-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller