kernel/linux.git/drivers/net/phy/Makefile, branch v4.3.1

net: phy: dp83848: Add TI DP83848 Ethernet PHY

2015-10-22T13:37:19+00:00

Add support for the TI DP83848 Ethernet PHY device. The DP83848 is a highly reliable, feature rich, IEEE 802.3 compliant single port 10/100 Mb/s Ethernet Physical Layer Transceiver supporting the MII and RMII interfaces. Signed-off-by: Andrew F. Davis Signed-off-by: Dan Murphy Reviewed-by: Florian Fainelli Acked-by: Dan Murphy Signed-off-by: David S. Miller

add microchip LAN88xx phy driver

2015-09-10T00:19:14+00:00

Add Microchip LAN88XX phy driver for phylib. Signed-off-by: Woojung Huh Signed-off-by: David S. Miller

net: phy: add driver for aquantia phy

2015-07-31T22:28:19+00:00

This patch added driver to support Aquantia PHYs AQ1202, AQ2104, AQR105, AQR405, which accessed through clause 45. Signed-off-by: Shaohui Xie Signed-off-by: David S. Miller

phylib: add driver for Teranetics TN2020

2015-07-21T06:59:41+00:00

Teranetics TN2020 is compliant with IEEE 802.3an 10 Gigabit. Signed-off-by: Shaohui Xie Signed-off-by: David S. Miller

net: phy: dp83867: Add TI dp83867 phy

2015-06-04T02:41:04+00:00

Add support for the TI dp83867 Gigabit ethernet phy device. The DP83867 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: Dan Murphy Signed-off-by: David S. Miller

amd-xgbe: Move the PHY support into amd-xgbe

2015-05-15T19:21:43+00:00

The AMD XGBE device is intended to work with a specific integrated PHY and that PHY is not meant to be a standalone PHY for use by other devices. As such this patch removes the phylib driver and implements the PHY support in the amd-xgbe driver (the majority of the logic from the phylib driver is moved into the amd-xgbe driver). Update the driver version to 1.0.1. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

net: Allow FIXED_PHY to be modular.

2014-12-16T20:02:23+00:00

Otherwise we get things like: warning: (NET_DSA_BCM_SF2 && BCMGENET && SYSTEMPORT) selects FIXED_PHY which has unmet direct dependencies (NETDEVICES && PHYLIB=y) In order to make this work we have to rename fixed.c to fixed_phy.c because the regulator drivers already have a module named "fixed.o". Signed-off-by: David S. Miller

net: phy: add generic UniMAC MDIO bus driver

2014-08-28T05:59:39+00:00

Add a generic UniMAC MDIO bus driver and its Device Tree binding, which can be used by the BCMGENET driver as-is, and the upcoming Starfighter 2 Ethernet switch MDIO bus controller. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

amd-xgbe: Configuration and build support

2014-06-05T22:26:51+00:00

This patch provides the Kconfig and Makefile changes needed to configure and build the AMD 10GbE platform driver and the AMD 10GbE phylib driver. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

net: phy: add Broadcom BCM7xxx internal PHY driver

2014-02-14T05:27:58+00:00

This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs internal PHYs. This driver supports the following generation of SoCs: - BCM7366, BCM7439, BCM7445 (28nm process) - all 40nm and 65nm (older MIPS-based SoCs) The PHYs on these SoCs require a bunch of workarounds to operate correctly, both during configuration time and at suspend/resume time, the driver handles that for us. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller