kernel/linux.git/drivers/net/phy/Kconfig, branch v6.3

net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy

2023-02-03T09:34:51+00:00

Add a driver for the motorcomm yt8531 gigabit ethernet phy. We have verified the driver on AM335x platform with yt8531 board. On the board, yt8531 gigabit ethernet phy works in utp mode, RGMII interface, supports 1000M/100M/10M speeds, and wol(magic package). Signed-off-by: Frank Sae Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY

2023-01-11T08:35:03+00:00

This patch adds support for the onsemi NCN26000 10BASE-T1S industrial Ethernet PHY. The driver supports Point-to-Multipoint operation without auto-negotiation and with link control handling. The PHY also features PLCA for improving performance in P2MP mode. Signed-off-by: Piergiorgio Beruto Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: remove redundant "depends on" lines

2022-12-09T04:01:21+00:00

Delete a few lines of "depends on PHYLIB" since they are inside an "if PHYLIB / endif # PHYLIB" block, i.e., they are redundant and the other 50+ drivers there don't use "depends on PHYLIB" since it is not needed. Signed-off-by: Randy Dunlap Cc: Andrew Lunn Cc: Heiner Kallweit Cc: Russell King Link: https://lore.kernel.org/r/20221207044257.30036-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski

net: phy: add Motorcomm YT8531S phy id.

2022-11-25T07:54:52+00:00

We added patch for motorcomm.c to support YT8531S. This patch has been tested on AM335x platform which has one YT8531S interface card and passed all test cases. The tested cases indluding: YT8531S UTP function with support of 10M/100M/1000M; YT8531S Fiber function with support of 100M/1000M; and YT8531S Combo function that supports auto detection of media type. Since most functions of YT8531S are similar to YT8521 and we reuse some codes for YT8521 in the patch file. Signed-off-by: Frank Signed-off-by: David S. Miller

net: phy: Add driver for Motorcomm yt8521 gigabit ethernet phy

2022-10-31T10:51:54+00:00

Add a driver for the motorcomm yt8521 gigabit ethernet phy. We have verified the driver on StarFive VisionFive development board, which is developed by Shanghai StarFive Technology Co., Ltd.. On the board, yt8521 gigabit ethernet phy works in utp mode, RGMII interface, supports 1000M/100M/10M speeds, and wol(magic package). Signed-off-by: Frank Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: mxl-gpy: add temperature sensor

2022-06-24T03:55:18+00:00

The GPY115 and GPY2xx PHYs contain an integrated temperature sensor. It accuracy is +/- 5°C. Add support for it. Signed-off-by: Michael Walle Acked-by: Guenter Roeck Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220622141716.3517645-1-michael@walle.cc Signed-off-by: Jakub Kicinski

net: phy: broadcom: Add PTP support for some Broadcom PHYs.

2022-06-24T03:49:02+00:00

This adds PTP support for BCM54210E Broadcom PHYs, in particular, the BCM54213PE, as used in the Rasperry PI CM4. It has only been tested on that hardware. Signed-off-by: Jonathan Lemon Acked-by: Richard Cochran Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY

2022-05-09T11:09:30+00:00

The DP83TD510E is an ultra-low power Ethernet physical layer transceiver that supports 10M single pair cable. This driver was tested with NXP SJA1105, STMMAC and ASIX AX88772B USB Ethernet controller. Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: adin1100: Add initial support for ADIN1100 industrial PHY

2022-05-01T16:45:35+00:00

The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. Signed-off-by: Alexandru Ardelean Signed-off-by: Alexandru Tachici Signed-off-by: David S. Miller

net: phy: Kconfig: micrel_phy: fix dependency issue

2022-03-15T11:28:56+00:00

When building driver CONFIG_MICREL_PHY the follow error shows up: aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0x1764): undefined reference to `ptp_clock_index' micrel.c:(.text+0x1764): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x4720): undefined reference to `ptp_clock_register' micrel.c:(.text+0x4720): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register' Rework Kconfig for MICREL_PHY to depend on 'PTP_1588_CLOCK_OPTIONAL'. Arnd describes in a good way why its needed to add this depends in patch e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies"). Reported-by: kernel test robot Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Anders Roxell Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220314110254.12498-1-anders.roxell@linaro.org Signed-off-by: Paolo Abeni