kernel/linux.git/drivers/net/phy/Kconfig, branch v6.13.6

net: phy: mediatek: Re-organize MediaTek ethernet phy drivers

2024-11-13T13:06:04+00:00

Re-organize MediaTek ethernet phy driver files and get ready to integrate some common functions and add new 2.5G phy driver. mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988 mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988 Reviewed-by: Andrew Lunn Signed-off-by: SkyLake.Huang Signed-off-by: David S. Miller

net: phy: microchip_t1s: add support for Microchip's LAN867X Rev.C2

2024-10-11T22:54:40+00:00

Add support for LAN8670/1/2 Rev.C2 as per the latest configuration note AN1699 released (Revision E (DS60001699F - June 2024)) for Rev.C1 is also applicable for Rev.C2. Refer hardware revisions list in the latest AN1699 Revision E (DS60001699F - June 2024). https://www.microchip.com/en-us/application-notes/an1699 Signed-off-by: Parthiban Veerasooran Link: https://patch.msgid.link/20241010082205.221493-7-parthiban.veerasooran@microchip.com Signed-off-by: Jakub Kicinski

net: phy: microchip_t1s: add support for Microchip's LAN867X Rev.C1

2024-10-11T22:54:39+00:00

Add support for LAN8670/1/2 Rev.C1 as per the latest configuration note AN1699 released (Revision E (DS60001699F - June 2024)). https://www.microchip.com/en-us/application-notes/an1699 Signed-off-by: Parthiban Veerasooran Link: https://patch.msgid.link/20241010082205.221493-6-parthiban.veerasooran@microchip.com Signed-off-by: Jakub Kicinski

net: phy: microchip_t1s: add support for Microchip's LAN865X Rev.B1

2024-10-11T22:54:39+00:00

Add support for LAN8650/1 Rev.B1. As per the latest configuration note AN1760 released (Revision F (DS60001760G - June 2024)) for Rev.B0 is also applicable for Rev.B1. Refer hardware revisions list in the latest AN1760 Revision F (DS60001760G - June 2024). https://www.microchip.com/en-us/application-notes/an1760 Signed-off-by: Parthiban Veerasooran Link: https://patch.msgid.link/20241010082205.221493-4-parthiban.veerasooran@microchip.com Signed-off-by: Jakub Kicinski

net: phy: add Applied Micro QT2025 PHY driver

2024-08-30T09:27:35+00:00

This driver supports Applied Micro Circuits Corporation QT2025 PHY, based on a driver for Tehuti Networks TN40xx chips. The original driver for TN40xx chips supports multiple PHY hardware (AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120, 88X3310, and MV88E2010). This driver is extracted from the original driver and modified to a PHY driver in Rust. This has been tested with Edimax EN-9320SFP+ 10G network adapter. Reviewed-by: Trevor Gross Reviewed-by: Andrew Lunn Signed-off-by: FUJITA Tomonori Signed-off-by: David S. Miller

net: phy: dp83tg720: Add cable testing support

2024-08-16T17:16:26+00:00

Introduce cable testing support for the DP83TG720 PHY. This implementation is based on the "DP83TG720S-Q1: Configuring for Open Alliance Specification Compliance (Rev. B)" application note. The feature has been tested with cables of various lengths: - No cable: 1m till open reported. - 5 meter cable: reported properly. - 20 meter cable: reported as 19m. - 40 meter cable: reported as cable ok. Reviewed-by: Andrew Lunn Signed-off-by: Oleksij Rempel Link: https://patch.msgid.link/20240812073046.1728288-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

phy: Add Open Alliance helpers for the PHY framework

2024-08-16T17:16:26+00:00

Introduce helper functions specific to Open Alliance diagnostics, integrating them into the PHY framework. Currently, these helpers are limited to 1000BaseT1 specific TDR functionality. Signed-off-by: Oleksij Rempel Link: https://patch.msgid.link/20240812073046.1728288-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

net: phy: air_en8811h: Add the Airoha EN8811H PHY driver

2024-03-29T19:06:44+00:00

Add the driver for the Airoha EN8811H 2.5 Gigabit PHY. The phy supports 100/1000/2500 Mbps with auto negotiation only. The driver uses two firmware files, for which updated versions are added to linux-firmware already. Note: At phy-address + 8 there is another device on the mdio bus, that belongs to the EN881H. While the original driver writes to it, Airoha has confirmed this is not needed. Therefore, communication with this device is not included in this driver. Signed-off-by: Eric Woudstra Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240326162305.303598-3-ericwouds@gmail.com Signed-off-by: Jakub Kicinski

net: phy: marvell-88q2xxx: add support for temperature sensor

2024-02-21T22:56:59+00:00

Marvell 88q2xxx devices have an inbuilt temperature sensor. Add hwmon support for this sensor. Reviewed-by: Andrew Lunn Reviewed-by: Guenter Roeck Signed-off-by: Dimitri Fedrau Link: https://lore.kernel.org/r/20240218075753.18067-9-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski

net: phy: move at803x PHY driver to dedicated directory

2024-02-01T00:25:16+00:00

In preparation for addition of other Qcom PHY and to tidy things up, move the at803x PHY driver to dedicated directory. The same order in the Kconfig selection is saved. Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240129141600.2592-2-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski