kernel/linux.git/drivers/net/pcs, branch v5.15.7

net: pcs: xpcs: fix incorrect steps on disable EEE

2021-10-06T10:18:27+00:00

When Energy-Efficient Ethernet(EEE) is disable from the MAC side, we need to clear the DW_VR_MII_EEE_TRN_LPI bit of DW_VR_MII_EEE_MCTRL1 register. Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong Signed-off-by: Wong Vee Khee Signed-off-by: David S. Miller

net: pcs: xpcs: fix incorrect CL37 AN sequence

2021-10-05T12:10:24+00:00

According to Synopsys DesignWare Cores Ethernet PCS databook, it is required to disable Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 0 if it is already enabled, before programming various fields of VR_MII_AN_CTRL registers. After all these programming are done, it is then required to enable Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 1. Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller") Cc: Vladimir Oltean Signed-off-by: Wong Vee Khee Reviewed-by: Vladimir Oltean Tested-by: Vladimir Oltean Signed-off-by: David S. Miller

net: update NXP copyright text

2021-09-17T12:52:17+00:00

NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: pcs: xpcs: Add Pause Mode support for SGMII and 2500BaseX

2021-08-16T10:03:22+00:00

SGMII/2500BaseX supports Pause frame as defined in the IEEE802.3x Flow Control standardization. Add this as a supported feature under the xpcs_sgmii_features struct. Cc: Vladimir Oltean Signed-off-by: Wong Vee Khee Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: pcs: xpcs: fix error handling on failed to allocate memory

2021-08-11T21:50:54+00:00

Drivers such as sja1105 and stmmac that call xpcs_create() expects an error returned by the pcs-xpcs module, but this was not the case on failed to allocate memory. Fixed this by returning an -ENOMEM instead of a NULL pointer. Fixes: 3ad1d171548e ("net: dsa: sja1105: migrate to xpcs for SGMII") Signed-off-by: Wong Vee Khee Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20210810085812.1808466-1-vee.khee.wong@linux.intel.com Signed-off-by: Jakub Kicinski

net: pcs: xpcs: Fix a less than zero u16 comparison error

2021-06-17T18:14:06+00:00

Currently the check for the u16 variable val being less than zero is always false because val is unsigned. Fix this by using the int variable for the assignment and less than zero check. Addresses-Coverity: ("Unsigned compared against 0") Fixes: f7380bba42fd ("net: pcs: xpcs: add support for NXP SJA1110") Signed-off-by: Colin Ian King Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller

net: pcs: xpcs: export xpcs_do_config and xpcs_link_up

2021-06-11T20:43:56+00:00

The sja1105 hardware has a quirk in that some changes require a switch reset, which loses all configuration. When the reset is initiated, everything needs to be reprogrammed, including the MACs and the PCS. This is currently done in sja1105_static_config_reload() - we manually call sja1105_adjust_port_config(), sja1105_sgmii_pcs_config() and sja1105_sgmii_pcs_force_speed() which are all internal functions. There is a desire for sja1105 to use the common xpcs driver, and that means that the equivalents of those functions, xpcs_do_config() and xpcs_link_up() respectively, will no longer be local functions. Forcing phylink to retrigger a resolve somehow, say by doing dev_close() followed by dev_open() is not really an option, because the CPU port might have a PCS as well, and there is no net device which we can close and reopen for that. Additionally, the dev_close/dev_open sequence might force a renegotiation of the copper-side link for SGMII ports connected to a PHY, and this is undesirable as well, because the switch reset is much quicker than a PHY autoneg, so we would have a lot more downtime. The only solution I see is for the sja1105 driver to keep doing what it's doing, and that means we need to export the equivalents from xpcs for sja1105_sgmii_pcs_config and sja1105_sgmii_pcs_force_speed, and call them directly in sja1105_static_config_reload(). This will be done during the conversion patch. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: pcs: xpcs: add support for NXP SJA1110

2021-06-11T20:43:56+00:00

The NXP SJA1110 switch integrates its own, non-Synopsys PMA, but it manages it through the register space of the XPCS itself, in a small register window inside MDIO_MMD_VEND2 from address 0x8030 to 0x806e. This coincides with where the registers for the default Synopsys PMA are, but the register definitions are of course not the same. This situation is an odd hardware quirk, but the simplest way to manage it is to drive the SJA1110's PMA from within the XPCS driver. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: pcs: xpcs: add support for NXP SJA1105

2021-06-11T20:43:56+00:00

The NXP SJA1105 DSA switch integrates a Synopsys SGMII XPCS on port 4. The generic code works fine, except there is an integration issue which needs to be dealt with: in this switch, the XPCS is integrated with a PMA that has the TX lane polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain normal non-inverted behavior, the TX lane polarity must be inverted in the PCS, via the DIGITAL_CONTROL_2 register. We introduce a pma_config() method in xpcs_compat which is called by the phylink_pcs_config() implementation. Also, the NXP SJA1105 returns all zeroes in the PHY ID registers 2 and 3. We need to hack up an ad-hoc PHY ID (OUI is zero, device ID is 1) in order for the XPCS driver to recognize it. This PHY ID is added to the public include/linux/pcs/pcs-xpcs.h for that reason (for the sja1105 driver to be able to use it in a later patch). Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: pcs: xpcs: also ignore phy id if it's all ones

2021-06-11T20:43:55+00:00

xpcs_get_id() searches multiple MMDs for a known PHY ID, starting with MDIO_MMD_PCS (3). However not all integrators might have implemented that MMD on their MDIO bus. For example, the NXP SJA1105 and SJA1110 switches only implement vendor-specific MMD 1 and 2. When there is nothing on an MDIO bus at a certain address, traditionally the bus returns 0xffff, which means that the bus remained in its default pull-up state for the duration of the MDIO transaction. The 0xffff value is widely used in drivers/net/phy/phy_device.c (see get_phy_c22_id for example) to denote a missing device. So it makes sense for the xpcs to ignore this value as well, and continue its search, eventually finding the proper PHY ID in the vendor-specific MMDs. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller