kernel/linux.git/drivers/net/macvlan.c, branch v6.12.107

macvlan: inherit needed_headroom and needed_tailroom from lowerdev

2026-08-23T12:22:50+00:00

[ Upstream commit cef51860becd9700217c81732ca1eb1ea6ed6fe1 ] macvlan devices inherit hard_header_len from lowerdev during macvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying lowerdev requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached macvlans in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. Fixes: b863ceb7ddce ("[NET]: Add macvlan driver") Reported-by: Tangxin Xie Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#m16adf0ff972cbfd8066c3a8e656e75eaeb12d021 Signed-off-by: Eric Dumazet Reviewed-by: Hangbin Liu Link: https://patch.msgid.link/20260806141938.287660-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF

2026-05-23T11:04:47+00:00

[ Upstream commit fa92a77b0ed4d5f11a71665a232ac5a54a4b055d ] macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1. This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb runs out of space, triggering a WARN_ON in rtnetlink and preventing the interface from being dumped. The bug can be reproduced with: ip link add macvlan0 link eth0 type macvlan mode bridge ip link set macvlan0 type macvlan bc_cutoff 0 ip -d link show macvlan0 # fails with -EMSGSIZE The bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff"), which added the nla_put_s32() call in macvlan_fill_info() but missed adding the corresponding nla_total_size(4) in macvlan_get_size(). A follow-up commit 55cef78c244d ("macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still did not fix the size calculation. Fixes: 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") Signed-off-by: Dudu Lu Reviewed-by: Vadim Fedorenko Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260413085349.73977-1-phx0fer@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

macvlan: annotate data-races around port->bc_queue_len_used

2026-05-23T11:04:23+00:00

[ Upstream commit 1ef5789d9906df3771c99b7f413caaf2bf473ca5 ] port->bc_queue_len_used is read and written locklessly, add READ_ONCE()/WRITE_ONCE() annotations. While WRITE_ONCE() in macvlan_fill_info() is not yet needed, it is a prereq for future RTNL avoidance. Fixes: d4bff72c8401 ("macvlan: Support for high multicast packet rate") Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260401103809.3038139-2-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

macvlan: observe an RCU grace period in macvlan_common_newlink() error path

2026-03-04T12:20:39+00:00

[ Upstream commit e3f000f0dee1bfab52e2e61ca6a3835d9e187e35 ] valis reported that a race condition still happens after my prior patch. macvlan_common_newlink() might have made @dev visible before detecting an error, and its caller will directly call free_netdev(dev). We must respect an RCU period, either in macvlan or the core networking stack. After adding a temporary mdelay(1000) in macvlan_forward_source_one() to open the race window, valis repro was: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source (ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4 PING 1.2.3.4 (1.2.3.4): 56 data bytes RTNETLINK answers: Invalid argument BUG: KASAN: slab-use-after-free in macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) Read of size 8 at addr ffff888016bb89c0 by task e/175 CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) kasan_report (mm/kasan/report.c:597) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) ? tasklet_init (kernel/softirq.c:983) macvlan_handle_frame (drivers/net/macvlan.c:501) Allocated by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) __kasan_kmalloc (mm/kasan/common.c:419) __kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657 mm/slub.c:7140) alloc_netdev_mqs (net/core/dev.c:12012) rtnl_create_link (net/core/rtnetlink.c:3648) rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Freed by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kfree (mm/slub.c:6674 mm/slub.c:6882) rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Fixes: f8db6475a836 ("macvlan: fix error recovery in macvlan_common_newlink()") Signed-off-by: Eric Dumazet Reported-by: valis Link: https://patch.msgid.link/20260213142557.3059043-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

macvlan: fix error recovery in macvlan_common_newlink()

2026-02-11T12:40:26+00:00

[ Upstream commit f8db6475a83649689c087a8f52486fcc53e627e9 ] valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, ¶ms, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue. Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.") Signed-off-by: Eric Dumazet Reported-by: valis Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com Closes: https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u Cc: Boudewijn van der Heide Link: https://patch.msgid.link/20260129204359.632556-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

macvlan: fix possible UAF in macvlan_forward_source()

2026-01-23T10:18:37+00:00

[ Upstream commit 7470a7a63dc162f07c26dbf960e41ee1e248d80e ] Add RCU protection on (struct macvlan_source_entry)->vlan. Whenever macvlan_hash_del_source() is called, we must clear entry->vlan pointer before RCU grace period starts. This allows macvlan_forward_source() to skip over entries queued for freeing. Note that macvlan_dev are already RCU protected, as they are embedded in a standard netdev (netdev_priv(ndev)). Fixes: 79cf79abce71 ("macvlan: add source mode") Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260108133651.1130486-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

netdev_features: convert NETIF_F_LLTX to dev->lltx

2024-09-03T09:36:43+00:00

NETIF_F_LLTX can't be changed via Ethtool and is not a feature, rather an attribute, very similar to IFF_NO_QUEUE (and hot). Free one netdev_features_t bit and make it a "hot" private flag. Signed-off-by: Alexander Lobakin Signed-off-by: Paolo Abeni

netdevice: convert private flags > BIT(31) to bitfields

2024-09-03T09:36:43+00:00

Make dev->priv_flags `u32` back and define bits higher than 31 as bitfield booleans as per Jakub's suggestion. This simplifies code which accesses these bits with no optimization loss (testb both before/after), allows to not extend &netdev_priv_flags each time, but also scales better as bits > 63 in the future would only add a new u64 to the structure with no complications, comparing to that extending ::priv_flags would require converting it to a bitmap. Note that I picked `unsigned long :1` to not lose any potential optimizations comparing to `bool :1` etc. Suggested-by: Jakub Kicinski Signed-off-by: Alexander Lobakin Signed-off-by: Paolo Abeni

net: Add struct kernel_ethtool_ts_info

2024-07-15T15:02:26+00:00

In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson Acked-by: Alexandra Winter Signed-off-by: Kory Maincent Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski

net: annotate writes on dev->mtu from ndo_change_mtu()

2024-05-07T23:19:14+00:00

Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet Reported-by: Simon Horman Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller Reviewed-by: Sabrina Dubroca Reviewed-by: Simon Horman Acked-by: Shannon Nelson Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski