kernel/linux.git/drivers/net/macsec.c, branch v6.1.168

macsec: MACsec SCI assignment for ES = 0

2025-06-27T10:07:22+00:00

[ Upstream commit d9816ec74e6d6aa29219d010bba3f780ba1d9d75 ] According to 802.1AE standard, when ES and SC flags in TCI are zero, used SCI should be the current active SC_RX. Current code uses the header MAC address. Without this patch, when ES flag is 0 (using a bridge or switch), header MAC will not fit the SCI and MACSec frames will be discarted. In order to test this issue, MACsec link should be stablished between two interfaces, setting SC and ES flags to zero and a port identifier different than one. For example, using ip macsec tools: ip link add link $ETH0 macsec0 type macsec port 11 send_sci off end_station off ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY ip macsec add macsec0 rx port 11 address $ETH1_MAC ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02 ip link set dev macsec0 up ip link add link $ETH1 macsec1 type macsec port 11 send_sci off end_station off ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY ip macsec add macsec1 rx port 11 address $ETH0_MAC ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02 ip link set dev macsec1 up Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Co-developed-by: Andreu Montiel Signed-off-by: Andreu Montiel Signed-off-by: Carlos Fernandez Reviewed-by: Subbaraya Sundeep Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

macsec: Fix use-after-free while sending the offloading packet

2024-11-08T15:26:41+00:00

[ Upstream commit f1e54d11b210b53d418ff1476c6b58a2f434dfc0 ] KASAN reports the following UAF. The metadata_dst, which is used to store the SCI value for macsec offload, is already freed by metadata_dst_free() in macsec_free_netdev(), while driver still use it for sending the packet. To fix this issue, dst_release() is used instead to release metadata_dst. So it is not freed instantly in macsec_free_netdev() if still referenced by skb. BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core] Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714 [...] Workqueue: mld mld_ifc_work Call Trace: dump_stack_lvl+0x51/0x60 print_report+0xc1/0x600 kasan_report+0xab/0xe0 mlx5e_xmit+0x1e8f/0x4190 [mlx5_core] dev_hard_start_xmit+0x120/0x530 sch_direct_xmit+0x149/0x11e0 __qdisc_run+0x3ad/0x1730 __dev_queue_xmit+0x1196/0x2ed0 vlan_dev_hard_start_xmit+0x32e/0x510 [8021q] dev_hard_start_xmit+0x120/0x530 __dev_queue_xmit+0x14a7/0x2ed0 macsec_start_xmit+0x13e9/0x2340 dev_hard_start_xmit+0x120/0x530 __dev_queue_xmit+0x14a7/0x2ed0 ip6_finish_output2+0x923/0x1a70 ip6_finish_output+0x2d7/0x970 ip6_output+0x1ce/0x3a0 NF_HOOK.constprop.0+0x15f/0x190 mld_sendpack+0x59a/0xbd0 mld_ifc_work+0x48a/0xa80 process_one_work+0x5aa/0xe50 worker_thread+0x79c/0x1290 kthread+0x28f/0x350 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x11/0x20 Allocated by task 3922: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0x77/0x90 __kmalloc_noprof+0x188/0x400 metadata_dst_alloc+0x1f/0x4e0 macsec_newlink+0x914/0x1410 __rtnl_newlink+0xe08/0x15b0 rtnl_newlink+0x5f/0x90 rtnetlink_rcv_msg+0x667/0xa80 netlink_rcv_skb+0x12c/0x360 netlink_unicast+0x551/0x770 netlink_sendmsg+0x72d/0xbd0 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x52e/0x6a0 ___sys_sendmsg+0xeb/0x170 __sys_sendmsg+0xb5/0x140 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4011: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x50 poison_slab_object+0x10c/0x190 __kasan_slab_free+0x11/0x30 kfree+0xe0/0x290 macsec_free_netdev+0x3f/0x140 netdev_run_todo+0x450/0xc70 rtnetlink_rcv_msg+0x66f/0xa80 netlink_rcv_skb+0x12c/0x360 netlink_unicast+0x551/0x770 netlink_sendmsg+0x72d/0xbd0 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x52e/0x6a0 ___sys_sendmsg+0xeb/0x170 __sys_sendmsg+0xb5/0x140 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Signed-off-by: Jianbo Liu Reviewed-by: Patrisious Haddad Reviewed-by: Chris Mi Signed-off-by: Tariq Toukan Reviewed-by: Simon Horman Reviewed-by: Sabrina Dubroca Link: https://patch.msgid.link/20241021100309.234125-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

macsec: don't increment counters for an unrelated SA

2024-11-01T00:55:59+00:00

[ Upstream commit cf58aefb1332db322060cad4a330d5f9292b0f41 ] On RX, we shouldn't be incrementing the stats for an arbitrary SA in case the actual SA hasn't been set up. Those counters are intended to track packets for their respective AN when the SA isn't currently configured. Due to the way MACsec is implemented, we don't keep counters unless the SA is configured, so we can't track those packets, and those counters will remain at 0. The RXSC's stats keeps track of those packets without telling us which AN they belonged to. We could add counters for non-existent SAs, and then find a way to integrate them in the dump to userspace, but I don't think it's worth the effort. Fixes: 91ec9bd57f35 ("macsec: Fix traffic counters/statistics") Reported-by: Paolo Abeni Signed-off-by: Sabrina Dubroca Link: https://patch.msgid.link/f5ac92aaa5b89343232615f4c03f9f95042c6aa0.1728657709.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst

2024-05-02T14:29:32+00:00

commit 642c984dd0e37dbaec9f87bd1211e5fac1f142bf upstream. Can now correctly identify where the packets should be delivered by using md_dst or its absence on devices that provide it. This detection is not possible without device drivers that update md_dst. A fallback pattern should be used for supporting such device drivers. This fallback mode causes multicast messages to be cloned to both the non-macsec and macsec ports, independent of whether the multicast message received was encrypted over MACsec or not. Other non-macsec traffic may also fail to be handled correctly for devices in promiscuous mode. Link: https://lore.kernel.org/netdev/ZULRxX9eIbFiVi7v@hog/ Cc: Sabrina Dubroca Cc: stable@vger.kernel.org Fixes: 860ead89b851 ("net/macsec: Add MACsec skb_metadata_dst Rx Data path support") Signed-off-by: Rahul Rameshbabu Reviewed-by: Benjamin Poirier Reviewed-by: Cosmin Ratiu Reviewed-by: Sabrina Dubroca Link: https://lore.kernel.org/r/20240423181319.115860-4-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: add DEV_STATS_READ() helper

2023-11-20T10:51:55+00:00

[ Upstream commit 0b068c714ca9479d2783cc333fff5bc2d4a6d45c ] Companion of DEV_STATS_INC() & DEV_STATS_ADD(). This is going to be used in the series. Use it in macsec_get_stats64(). Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Stable-dep-of: ff672b9ffeb3 ("ipvlan: properly track tx_errors") Signed-off-by: Sasha Levin

net: macsec: indicate next pn update when offloading

2023-10-19T21:08:53+00:00

[ Upstream commit 0412cc846a1ef38697c3f321f9b174da91ecd3b5 ] Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by: Radu Pirea (NXP OSS) Reviewed-by: Sabrina Dubroca Signed-off-by: Paolo Abeni Stable-dep-of: e0a8c918daa5 ("net: phy: mscc: macsec: reject PN update requests") Signed-off-by: Sasha Levin

Revert "net: macsec: preserve ingress frame ordering"

2023-09-13T07:42:26+00:00

commit d3287e4038ca4f81e02067ab72d087af7224c68b upstream. This reverts commit ab046a5d4be4c90a3952a0eae75617b49c0cb01b. It was trying to work around an issue at the crypto layer by excluding ASYNC implementations of gcm(aes), because a bug in the AESNI version caused reordering when some requests bypassed the cryptd queue while older requests were still pending on the queue. This was fixed by commit 38b2f68b4264 ("crypto: aesni - Fix cryptd reordering problem on gcm"), which pre-dates ab046a5d4be4. Herbert Xu confirmed that all ASYNC implementations are expected to maintain the ordering of completions wrt requests, so we can use them in MACsec. On my test machine, this restores the performance of a single netperf instance, from 1.4Gbps to 4.4Gbps. Link: https://lore.kernel.org/netdev/9328d206c5d9f9239cae27e62e74de40b258471d.1692279161.git.sd@queasysnail.net/T/ Link: https://lore.kernel.org/netdev/1b0cec71-d084-8153-2ba4-72ce71abeb65@byu.edu/ Link: https://lore.kernel.org/netdev/d335ddaa-18dc-f9f0-17ee-9783d3b2ca29@mailbox.tu-dresden.de/ Fixes: ab046a5d4be4 ("net: macsec: preserve ingress frame ordering") Signed-off-by: Sabrina Dubroca Link: https://lore.kernel.org/r/11c952469d114db6fb29242e1d9545e61f52f512.1693757159.git.sd@queasysnail.net Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

macsec: use DEV_STATS_INC()

2023-08-16T16:27:26+00:00

commit 32d0a49d36a2a306c2e47fe5659361e424f0ed3f upstream. syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Sabrina Dubroca Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: macsec: fix double free of percpu stats

2023-06-21T14:01:02+00:00

[ Upstream commit 0c0cf3db83f8c7c9bb141c2771a34043bcf952ef ] Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and macsec->stats on some of the memory allocation failure paths. However, the net_device is already registered to that moment: in macsec_newlink(), just before calling macsec_add_dev(). This means that during unregister process its priv_destructor - macsec_free_netdev() - will be called and will free the stats again. Remove freeing percpu stats inside macsec_add_dev() because macsec_free_netdev() will correctly free the already allocated ones. The pointers to unallocated stats stay NULL, and free_percpu() treats that correctly. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Fedor Pchelkin Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: macsec: fix net device access prior to holding a lock

2022-12-31T12:32:53+00:00

[ Upstream commit f3b4a00f0f62da252c598310698dfc82ef2f2e2e ] Currently macsec offload selection update routine accesses the net device prior to holding the relevant lock. Fix by holding the lock prior to the device access. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Reviewed-by: Raed Salem Signed-off-by: Emeel Hakim Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin