kernel/linux.git/drivers/net/ipvlan/ipvlan_main.c, branch v5.10.264

ipvlan: Make the addrs_lock be per port

2026-02-06T15:40:04+00:00

[ Upstream commit d3ba32162488283c0a4c5bedd8817aec91748802 ] Make the addrs_lock be per port, not per ipvlan dev. Initial code seems to be written in the assumption, that any address change must occur under RTNL. But it is not so for the case of IPv6. So 1) Introduce per-port addrs_lock. 2) It was needed to fix places where it was forgotten to take lock (ipvlan_open/ipvlan_close) This appears to be a very minor problem though. Since it's highly unlikely that ipvlan_add_addr() will be called on 2 CPU simultaneously. But nevertheless, this could cause: 1) False-negative of ipvlan_addr_busy(): one interface iterated through all port->ipvlans + ipvlan->addrs under some ipvlan spinlock, and another added IP under its own lock. Though this is only possible for IPv6, since looks like only ipvlan_addr6_event() can be called without rtnl_lock. 2) Race since ipvlan_ht_addr_add(port) is called under different ipvlan->addrs_lock locks This should not affect performance, since add/remove IP is a rare situation and spinlock is not taken on fast paths. Fixes: 8230819494b3 ("ipvlan: use per device spinlock to protect addrs list updates") Signed-off-by: Dmitry Skorodumov Reviewed-by: Paolo Abeni Link: https://patch.msgid.link/20260112142417.4039566-2-skorodumov.dmitry@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ipvlan: properly track tx_errors

2023-11-20T10:06:46+00:00

[ Upstream commit ff672b9ffeb3f82135488ac16c5c5eb4b992999b ] Both ipvlan_process_v4_outbound() and ipvlan_process_v6_outbound() increment dev->stats.tx_errors in case of errors. Unfortunately there are two issues : 1) ipvlan_get_stats64() does not propagate dev->stats.tx_errors to user. 2) Increments are not atomic. KCSAN would complain eventually. Use DEV_STATS_INC() to not miss an update, and change ipvlan_get_stats64() to copy the value back to user. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Eric Dumazet Cc: Mahesh Bandewar Link: https://lore.kernel.org/r/20231026131446.3933175-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ipvlan: Fix a reference count leak warning in ipvlan_ns_exit()

2023-08-30T14:23:12+00:00

[ Upstream commit 043d5f68d0ccdda91029b4b6dce7eeffdcfad281 ] There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with L3S mode and ipvlan2 with L2 mode are created based on them as figure (1). In this case, ipvlan_register_nf_hook() will be called to register nf hook which is needed by ipvlans in L3S mode in ns1 and value of ipvl_nf_hook_refcnt is set to 1. (1) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) veth3--ipvlan2 (L2) (2) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) ipvlan2 (L2) veth3 | | |------->-------->--------->-------- migrate When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event: dev_change_net_namespace call_netdevice_notifiers ipvlan_device_event ipvlan_migrate_l3s_hook ipvlan_register_nf_hook(newnet) (I) ipvlan_unregister_nf_hook(oldnet) (II) In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0 since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to register nf_hook in ns2 and unregister nf_hook in ns1. As a result, ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2 is increased incorrectly. When the second net namespace is removed, a reference count leak warning in ipvlan_ns_exit() will be triggered. This patch add a check before ipvlan_migrate_l3s_hook() is called. The warning can be triggered as follows: $ ip netns add ns1 $ ip netns add ns2 $ ip netns exec ns1 ip link add veth1 type veth peer name veth2 $ ip netns exec ns1 ip link add veth3 type veth peer name veth4 $ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s $ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2 $ ip netns exec ns1 ip link set veth3 netns ns2 $ ip net del ns2 Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns") Signed-off-by: Lu Wei Reviewed-by: Florian Westphal Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ipvlan: advertise link netns via netlink

2020-08-24T22:53:33+00:00

Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Test commands: ip netns add nst ip link add dummy0 type dummy ip link add ipvlan0 link dummy0 type ipvlan ip link set ipvlan0 netns nst ip netns exec nst ip link show ipvlan0 Result: ---Before--- 6: ipvlan0@if5: ... link/ether 82:3a:78:ab:60:50 brd ff:ff:ff:ff:ff:ff ---After--- 12: ipvlan0@if11: ... link/ether 42:b1:ad:57:4e:27 brd ff:ff:ff:ff:ff:ff link-netnsid 0 ~~~~~~~~~~~~~~ Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

ipvlan: fix device features

2020-08-16T22:15:00+00:00

Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose NETIF_F_LLTX feature because of the incorrect handling of features in ipvlan_fix_features(). --before-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Actual changes: vlan-challenged: off [fixed] tx-lockless: off [fixed] lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: off [fixed] lpaa10:~# --after-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Could not change any device features lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar Cc: Eric Dumazet Signed-off-by: David S. Miller

net: partially revert dynamic lockdep key changes

2020-05-04T19:05:56+00:00

This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in " commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov Cc: Taehee Yoo Signed-off-by: Cong Wang Acked-by: Taehee Yoo Signed-off-by: David S. Miller

ipvlan: do not add hardware address of master to its unicast filter list

2020-03-09T04:13:50+00:00

There is a problem when ipvlan slaves are created on a master device that is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not support unicast address filtering. When an ipvlan device is brought up in ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware address of the vmxnet3 master device to the unicast address list of the master device, phy_dev->uc. This inevitably leads to the vmxnet3 master device being forced into promiscuous mode by __dev_set_rx_mode(). Promiscuous mode is switched on the master despite the fact that there is still only one hardware address that the master device should use for filtering in order for the ipvlan device to be able to receive packets. The comment above struct net_device describes the uc_promisc member as a "counter, that indicates, that promiscuous mode has been enabled due to the need to listen to additional unicast addresses in a device that does not implement ndo_set_rx_mode()". Moreover, the design of ipvlan guarantees that only the hardware address of a master device, phy_dev->dev_addr, will be used to transmit and receive all packets from its ipvlan slaves. Thus, the unicast address list of the master device should not be modified by ipvlan_open() and ipvlan_stop() in order to make ipvlan a workable option on masters that do not support unicast address filtering. Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver") Reported-by: Per Sundstrom Signed-off-by: Jiri Wiesner Reviewed-by: Eric Dumazet Acked-by: Mahesh Bandewar Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-11-02T20:54:56+00:00

The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller

net: core: add generic lockdep keys

2019-10-24T21:53:48+00:00

Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

ipvlan: consolidate TSO flags using NETIF_F_ALL_TSO

2019-10-11T01:03:29+00:00

This will ensure that any new TSO related flags added (which would be part of ALL_TSO mask and IPvlan driver doesn't need to update every time new flag gets added. Signed-off-by: Mahesh Bandewar Suggested-by: Eric Dumazet Signed-off-by: Jakub Kicinski