kernel/linux.git/drivers/net/ipa/ipa_uc.c, branch v6.1.168

net: ipa: update copyrights

2022-10-03T23:49:20+00:00

Some source files state copyright dates that are earlier than the last modification of the file. Change the copyright year to 2022 in all such cases. Signed-off-by: Alex Elder Link: https://lore.kernel.org/r/20220930224549.3503434-1-elder@linaro.org Signed-off-by: Jakub Kicinski

net: ipa: define remaining IPA register fields

2022-09-28T01:42:52+00:00

Define the fields for the ENDP_INIT_DEAGGR, ENDP_INIT_RSRC_GRP, ENDP_INIT_SEQ, ENDP_STATUS, and ENDP_FILTER_ROUTER_HSH_CFG, and IPA_IRQ_UC IPA registers for all supported IPA versions. Create enumerated types to identify fields for these IPA registers. Use IPA_REG_FIELDS() and IPA_REG_STRIDE_FIELDS() to specify the field mask values defined for these registers, for each supported version of IPA. Use ipa_reg_encode() and ipa_reg_bit() to build up the values to be written to these registers, remove an inline function and all the *_FMASK symbols that are now no longer used. Signed-off-by: Alex Elder Signed-off-by: Jakub Kicinski

net: ipa: introduce ipa_reg()

2022-09-28T01:42:50+00:00

Create a new function that returns a register descriptor given its ID. Change ipa_reg_offset() and ipa_reg_n_offset() so they take a register descriptor argument rather than an IPA pointer and register ID. Have them accept null pointers (and return an invalid 0 offset), to avoid the need for excessive error checking. (A warning is issued whenever ipa_reg() returns 0). Call ipa_reg() or ipa_reg_n() to look up information about the register before calls to ipa_reg_offset() and ipa_reg_n_offset(). Delay looking up offsets until they're needed to read or write registers. Signed-off-by: Alex Elder Signed-off-by: Jakub Kicinski

net: ipa: use IPA register IDs to determine offsets

2022-09-28T01:42:49+00:00

Expose two inline functions that return the offset for a register whose ID is provided; one of them takes an additional argument that's used for registers that are parameterized. These both use a common helper function __ipa_reg_offset(), which just uses the offset symbols already defined. Replace all references to the offset macros defined for IPA registers with calls to ipa_reg_offset() or ipa_reg_n_offset(). Signed-off-by: Alex Elder Signed-off-by: Jakub Kicinski

net: ipa: request IPA register values be retained

2022-02-03T16:03:43+00:00

In some cases, the IPA hardware needs to request the always-on subsystem (AOSS) to coordinate with the IPA microcontroller to retain IPA register values at power collapse. This is done by issuing a QMP request to the AOSS microcontroller. A similar request ondoes that request. We must get and hold the "QMP" handle early, because we might get back EPROBE_DEFER for that. But the actual request should be sent while we know the IPA clock is active, and when we know the microcontroller is operational. Fixes: 1aac309d3207 ("net: ipa: use autosuspend") Signed-off-by: Alex Elder Signed-off-by: Jakub Kicinski

net: ipa: rename ipa_clock_* symbols

2021-08-22T08:44:17+00:00

Rename a number of functions to clarify that there is no longer a notion of an "IPA clock," but rather that the functions are more generally related to IPA power management. ipa_clock_enable() -> ipa_power_enable() ipa_clock_disable() -> ipa_power_disable() ipa_clock_rate() -> ipa_core_clock_rate() ipa_clock_init() -> ipa_power_init() ipa_clock_exit() -> ipa_power_exit() Rename the ipa_clock structure to be ipa_power. Rename all variables and fields using that structure type "power" rather than "clock". Rename the ipa_clock_data structure to be ipa_power_data, and more broadly, just substitute "power" for "clock" in places that previously represented things related to the "IPA clock". Update comments throughout. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: use autosuspend

2021-08-22T08:44:17+00:00

Use runtime power management autosuspend. Up until this point, we only suspended the IPA hardware for system suspend; now we'll suspend it aggressively using runtime power management, setting the initial autosuspend delay to half a second of inactivity. Replace pm_runtime_put() calls with pm_runtime_put_autosuspend(), call pm_runtime_mark_last_busy() before each of those. In places where we're shutting things down, or decrementing power references for errors, use pm_runtime_put_noidle() instead. Finally, remove ipa_runtime_idle(), so the ->runtime_suspend callback will occur if idle. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: don't use ipa_clock_get() in "ipa_uc.c"

2021-08-20T13:45:47+00:00

Replace the ipa_clock_get() call in ipa_uc_clock() when taking the "proxy" clock reference for the microcontroller with a call to pm_runtime_get_sync(). Replace calls of ipa_clock_put() for the microcontroller with pm_runtime_put() calls instead. There is a chance we get an error when taking the microcontroller power reference. This is an unlikely scenario, where system suspend is initiated just before we learn the modem is booting. For now we'll just accept that this could occur, and report it if it does. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: have ipa_clock_get() return a value

2021-08-11T12:31:55+00:00

We currently assume no errors occur when enabling or disabling the IPA core clock and interconnects. And although this commit exposes errors that could occur, we generally assume this won't happen in practice. This commit changes ipa_clock_get() and ipa_clock_put() so each returns a value. The values returned are meant to mimic what the runtime power management functions return, so we can set up error handling here before we make the switch. Have ipa_clock_get() increment the reference count even if it returns an error, to match the behavior of pm_runtime_get(). More details follow. When taking a reference in ipa_clock_get(), return 0 for the first reference, 1 for subsequent references, or a negative error code if an error occurs. Note that if ipa_clock_get() returns an error, we must not touch hardware; in some cases such errors now cause entire blocks of code to be skipped. When dropping a reference in ipa_clock_put(), we return 0 or an error code. The error would come from ipa_clock_disable(), which now returns what ipa_interconnect_disable() returns (either 0 or a negative error code). For now, callers ignore the return value; if an error occurs, a message will have already been logged, and little more can actually be done to improve the situation. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: introduce ipa_uc_clock()

2021-07-26T22:09:18+00:00

The first time it's booted, the modem loads and starts the IPA-resident microcontroller. Once the microcontroller has completed its initialization, it notifies the AP it's "ready" by sending an INIT_COMPLETED response message. Until it receives that microcontroller message, the AP must ensure the IPA core clock remains operational. Currently, a "proxy" clock reference is taken in ipa_uc_config(), dropping it again once the message is received. However there could be a long delay between when ipa_config() completes and when modem actually starts. And because the microcontroller gets loaded by the modem, there's no need to get the modem "proxy clock" until the first time it starts. Create a new function ipa_uc_clock() which takes the "proxy" clock reference for the microcontroller. Call it when we get remoteproc SSR notification that the modem is about to start. Keep an additional flag to record whether this proxy clock reference needs to be dropped at shutdown time, and issue a warning if we get the microcontroller message either before the clock reference is taken, or after it has already been dropped. Drop the nearby use of "hh" length modifiers, which are no longer encouraged in the kernel. Signed-off-by: Alex Elder Signed-off-by: David S. Miller