kernel/linux.git/drivers/net/ipa/ipa_cmd.c, branch v6.6.132

net: ipa: generalize register offset functions

2023-02-10T08:06:32+00:00

Rename ipa_reg_offset() to be reg_offset() and move its definition to "reg.h". Rename ipa_reg_n_offset() to be reg_n_offset() also. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: start generalizing "ipa_reg"

2023-02-10T08:06:32+00:00

IPA register definitions have evolved with each new version. The changes required to support more than 32 endpoints in IPA v5.0 made it best to define a unified mechanism for defining registers and their fields. GSI register definitions, meanwhile, have remained fairly stable. And even as the total number of IPA endpoints goes beyond 32, the number of GSI channels on a given EE that underly endpoints still remains 32 or less. Despite that, GSI v3.0 (which is used with IPA v5.0) extends the number of channels (and events) it supports to be about 256, and as a result, many GSI register definitions must change significantly. To address this, we'll use the same "ipa_reg" mechanism to define the GSI registers. As a first step in generalizing the "ipa_reg" to also support GSI registers, isolate the definitions of the "ipa_reg" and "ipa_regs" structure types (and some supporting macros) into a new header file, and remove the "ipa_" and "IPA_" from symbol names. Separate the IPA register ID validity checking from the generic check that a register ID is in range. Aside from that, this is intended to have no functional effect on the code. Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: update table cache flushing

2023-02-01T05:45:51+00:00

Update the code that causes filter and router table caches to be flushed so that it supports IPA versions 5.0+. It adds a comment in ipa_hardware_config_hashing() that explains that cacheing does not need to be enabled, just as before, because it's enabled by default. (For the record, the FILT_ROUT_CACHE_CFG register would have been used if we wanted to explicitly enable these.) Signed-off-by: Alex Elder Reviewed-by: Leon Romanovsky Signed-off-by: Jakub Kicinski

net: ipa: extend endpoints in packet init command

2023-02-01T05:45:51+00:00

The IP_PACKET_INIT immediate command defines the destination endpoint to which a packet should be sent. Prior to IPA v5.0, a 5 bit field in that command represents the endpoint, but starting with IPA v5.0, the field is extended to 8 bits to support more than 32 endpoints. Signed-off-by: Alex Elder Reviewed-by: Leon Romanovsky Signed-off-by: Jakub Kicinski

net: ipa: support more endpoints

2023-02-01T05:45:51+00:00

Increase the number of endpoints supported by the driver to 36, which IPA v5.0 supports. This makes it impossible to check at build time whether the supported number is too big to fit within the (5-bit) PACKET_INIT destination endpoint field. Instead, convert the build time check to compare against what fits in 8 bits. Add a check in ipa_endpoint_config() to also ensure the hardware reports an endpoint count that's in the expected range. Just open-code 32 as the limit (the PACKET_INIT field mask is not available where we'd want to use it). Signed-off-by: Alex Elder Reviewed-by: Leon Romanovsky Signed-off-by: Jakub Kicinski

net: ipa: determine filter table size from memory region

2022-10-27T11:38:13+00:00

Currently we assume that any filter table contains a fixed number of entries. Like routing tables, the number of entries in a filter table is limited only by the size of the IPA-local memory region used to hold the table. Stop assuming that a filter table has exactly 14 entries. Instead, determine the number of entries in a routing table by dividing its memory region size by the size of an entry. (Note that the first "entry" in a filter table contains an endpoint bitmap.) Signed-off-by: Alex Elder Signed-off-by: Paolo Abeni

net: ipa: determine route table size from memory region

2022-10-27T11:38:12+00:00

Currently we assume that any routing table contains a fixed number of entries. The number of entries in a routing table can actually vary, depending only on the size of the IPA-local memory region used to hold the table. Stop assuming that a routing table has exactly 15 entries. Instead, determine the number of entries in a routing table by dividing its memory region size by the size of an entry. The number of entries is computed early, when ipa_table_mem_valid() is called by ipa_table_init(). Signed-off-by: Alex Elder Signed-off-by: Paolo Abeni

net: ipa: introduce ipa_cmd_init()

2022-10-25T09:15:19+00:00

Currently, ipa_cmd_data_valid() is called by ipa_mem_config(). Nothing it does requires access to hardware though, so it can be done during the init phase of IPA driver startup. Create a new function ipa_cmd_init(), whose purpose is to do early initialization related to IPA immediate commands. It will call the build-time validation function, then will make the two calls made previously by ipa_cmd_data_valid(). This make ipa_cmd_data_valid() unnecessary, so get rid of it. Rename ipa_cmd_header_valid() to be ipa_cmd_header_init_local_valid(), so its name is clearer about which IPA immediate command it is associated with. Signed-off-by: Alex Elder Signed-off-by: Paolo Abeni

net: ipa: verify table sizes fit in commands early

2022-10-25T09:15:18+00:00

We currently verify the table size and offset fit in the immediate command fields that must encode them in ipa_table_valid_one(). We can now make this check earlier, in ipa_table_mem_valid(). The non-hashed IPv4 filter and route tables will always exist, and their sizes will match the IPv6 tables, as well as the hashed tables (if supported). So it's sufficient to verify the offset and size of the IPv4 non-hashed tables fit into these fields. Rename the function ipa_cmd_table_init_valid(), to reinforce that it is the TABLE_INIT immediate command fields we're checking. Signed-off-by: Alex Elder Signed-off-by: Paolo Abeni

net: ipa: remove two memory region checks

2022-10-25T09:15:18+00:00

There's no need to ensure table memory regions fit within the IPA-local memory range. And there's no need to ensure the modem header memory region is in range either. These are verified for all memory regions in ipa_mem_size_valid(), once we have settled on the size of IPA memory. Signed-off-by: Alex Elder Signed-off-by: Paolo Abeni