kernel/linux.git/drivers/net/hyperv, branch v6.1.87

hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed

2024-02-23T08:12:46+00:00

commit 9cae43da9867412f8bd09aee5c8a8dc5e8dc3dc2 upstream. If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER handler cannot perform VF register successfully as the register call is received before netvsc_probe is finished. This is because we register register_netdevice_notifier() very early( even before vmbus_driver_register()). To fix this, we try to register each such matching VF( if it is visible as a netdevice) at the end of netvsc_probe. Cc: stable@vger.kernel.org Fixes: 85520856466e ("hv_netvsc: Fix race of register_netdevice_notifier and VF register") Suggested-by: Dexuan Cui Signed-off-by: Shradha Gupta Reviewed-by: Haiyang Zhang Reviewed-by: Dexuan Cui Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove

2024-02-23T08:12:42+00:00

commit e0526ec5360a48ad3ab2e26e802b0532302a7e11 upstream. In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus] Cc: stable@vger.kernel.org Fixes: ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel") Signed-off-by: Souradeep Chakrabarti Reviewed-by: Dexuan Cui Reviewed-by: Haiyang Zhang Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes

2024-02-01T00:17:07+00:00

commit 6941f67ad37d5465b75b9ffc498fcf6897a3c00e upstream. Current code in netvsc_drv_init() incorrectly assumes that PAGE_SIZE is 4 Kbytes, which is wrong on ARM64 with 16K or 64K page size. As a result, the default VMBus ring buffer size on ARM64 with 64K page size is 8 Mbytes instead of the expected 512 Kbytes. While this doesn't break anything, a typical VM with 8 vCPUs and 8 netvsc channels wastes 120 Mbytes (8 channels * 2 ring buffers/channel * 7.5 Mbytes/ring buffer). Unfortunately, the module parameter specifying the ring buffer size is in units of 4 Kbyte pages. Ideally, it should be in units that are independent of PAGE_SIZE, but backwards compatibility prevents changing that now. Fix this by having netvsc_drv_init() hardcode 4096 instead of using PAGE_SIZE when calculating the ring buffer size in bytes. Also use the VMBUS_RING_SIZE macro to ensure proper alignment when running with page size larger than 4K. Cc: # 5.15.x Fixes: 7aff79e297ee ("Drivers: hv: Enable Hyper-V code to be built on ARM64") Signed-off-by: Michael Kelley Link: https://lore.kernel.org/r/20240122162028.348885-1-mhklinux@outlook.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

hv_netvsc: rndis_filter needs to select NLS

2023-12-13T17:39:06+00:00

[ Upstream commit 6c89f49964375c904cea33c0247467873f4daf2c ] rndis_filter uses utf8s_to_utf16s() which is provided by setting NLS, so select NLS to fix the build error: ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined! Fixes: 1ce09e899d28 ("hyperv: Add support for setting MAC from within guests") Signed-off-by: Randy Dunlap Cc: Haiyang Zhang Cc: K. Y. Srinivasan Cc: Wei Liu Cc: Dexuan Cui Reviewed-by: Simon Horman Tested-by: Simon Horman # build-tested Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

hv_netvsc: Mark VF as slave before exposing it to user-mode

2023-12-03T06:32:11+00:00

commit c807d6cd089d2f4951baa838081ec5ae3e2360f8 upstream. When a VF is being exposed form the kernel, it should be marked as "slave" before exposing to the user-mode. The VF is not usable without netvsc running as master. The user-mode should never see a VF without the "slave" flag. This commit moves the code of setting the slave flag to the time before VF is exposed to user-mode. Cc: stable@vger.kernel.org Fixes: 0c195567a8f6 ("netvsc: transparent VF management") Signed-off-by: Long Li Signed-off-by: Haiyang Zhang Acked-by: Stephen Hemminger Acked-by: Dexuan Cui Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Fix race of register_netdevice_notifier and VF register

2023-12-03T06:32:11+00:00

commit 85520856466ed6bc3b1ccb013cddac70ceb437db upstream. If VF NIC is registered earlier, NETDEV_REGISTER event is replayed, but NETDEV_POST_INIT is not. Move register_netdevice_notifier() earlier, so the call back function is set before probing. Cc: stable@vger.kernel.org Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by: Dexuan Cui Signed-off-by: Haiyang Zhang Reviewed-by: Wojciech Drewek Reviewed-by: Dexuan Cui Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

hv_netvsc: fix race of netvsc and VF register_netdevice

2023-12-03T06:32:11+00:00

commit d30fb712e52964f2cf9a9c14cf67078394044837 upstream. The rtnl lock also needs to be held before rndis_filter_device_add() which advertises nvsp_2_vsc_capability / sriov bit, and triggers VF NIC offering and registering. If VF NIC finished register_netdev() earlier it may cause name based config failure. To fix this issue, move the call to rtnl_lock() before rndis_filter_device_add(), so VF will be registered later than netvsc / synthetic NIC, and gets a name numbered (ethX) after netvsc. Cc: stable@vger.kernel.org Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by: Dexuan Cui Signed-off-by: Haiyang Zhang Reviewed-by: Wojciech Drewek Reviewed-by: Simon Horman Reviewed-by: Dexuan Cui Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Check status in SEND_RNDIS_PKT completion message

2023-03-10T08:33:53+00:00

[ Upstream commit dca5161f9bd052e9e73be90716ffd57e8762c697 ] Completion responses to SEND_RNDIS_PKT messages are currently processed regardless of the status in the response, so that resources associated with the request are freed. While this is appropriate, code bugs that cause sending a malformed message, or errors on the Hyper-V host, go undetected. Fix this by checking the status and outputting a rate-limited message if there is an error. Signed-off-by: Michael Kelley Reviewed-by: Haiyang Zhang Link: https://lore.kernel.org/r/1676264881-48928-1-git-send-email-mikelley@microsoft.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC

2023-02-14T18:11:40+00:00

commit c6aa9d3b43cd11ac13a8220368a3b0483c6751d4 upstream. Memory allocations in the network transmit path must use GFP_ATOMIC so they won't sleep. Reported-by: Paolo Abeni Link: https://lore.kernel.org/lkml/8a4d08f94d3e6fe8b6da68440eaa89a088ad84f9.camel@redhat.com/ Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley Link: https://lore.kernel.org/r/1675714317-48577-1-git-send-email-mikelley@microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()

2023-02-09T10:28:15+00:00

commit 99f1c46011cc0feb47d4f4f7bee70a0341442d14 upstream. netvsc_dma_map() and netvsc_dma_unmap() currently check the cp_partial flag and adjust the page_count so that pagebuf entries for the RNDIS portion of the message are skipped when it has already been copied into a send buffer. But this adjustment has already been made by code in netvsc_send(). The duplicate adjustment causes some pagebuf entries to not be mapped. In a normal VM, this doesn't break anything because the mapping doesn’t change the PFN. But in a Confidential VM, dma_map_single() does bounce buffering and provides a different PFN. Failing to do the mapping causes the wrong PFN to be passed to Hyper-V, and various errors ensue. Fix this by removing the duplicate adjustment in netvsc_dma_map() and netvsc_dma_unmap(). Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley Reviewed-by: Haiyang Zhang Link: https://lore.kernel.org/r/1675135986-254490-1-git-send-email-mikelley@microsoft.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman