kernel/linux.git/drivers/net/hyperv/hyperv_net.h, branch v5.10.78

hv_netvsc: Add validation for untrusted Hyper-V values

2020-09-17T23:21:26+00:00

For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause indexing off the end of an array, or subvert an existing validation via integer overflow. Ensure that outgoing packets do not have any leftover guest memory that has not been zeroed out. Signed-off-by: Andres Beltran Co-developed-by: Andrea Parri (Microsoft) Signed-off-by: Andrea Parri (Microsoft) Cc: "David S. Miller" Cc: Jakub Kicinski Cc: netdev@vger.kernel.org Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: Cache the current data path to avoid duplicate call and message

2020-09-10T19:55:40+00:00

The previous change "hv_netvsc: Switch the data path at the right time during hibernation" adds the call of netvsc_vf_changed() upon NETDEV_CHANGE, so it's necessary to avoid the duplicate call and message when the VF is brought UP or DOWN. Signed-off-by: Dexuan Cui Signed-off-by: David S. Miller

hv_netvsc: add support for vlans in AF_PACKET mode

2020-07-23T00:58:15+00:00

Vlan tagged packets are getting dropped when used with DPDK that uses the AF_PACKET interface on a hyperV guest. The packet layer uses the tpacket interface to communicate the vlans information to the upper layers. On Rx path, these drivers can read the vlan info from the tpacket header but on the Tx path, this information is still within the packet frame and requires the paravirtual drivers to push this back into the NDIS header which is then used by the host OS to form the packet. This transition from the packet frame to NDIS header is currently missing hence causing the host OS to drop the all vlan tagged packets sent by the drivers that use AF_PACKET (ETH_P_ALL) such as DPDK. Here is an overview of the changes in the vlan header in the packet path: The RX path (userspace handles everything): 1. RX VLAN packet is stripped by HOST OS and placed in NDIS header 2. Guest Kernel RX hv_netvsc packets and moves VLAN info from NDIS header into kernel SKB 3. Kernel shares packets with user space application with PACKET_MMAP. The SKB VLAN info is copied to tpacket layer and indication set TP_STATUS_VLAN_VALID. 4. The user space application will re-insert the VLAN info into the frame The TX path: 1. The user space application has the VLAN info in the frame. 2. Guest kernel gets packets from the application with PACKET_MMAP. 3. The kernel later sends the frame to the hv_netvsc driver. The only way to send VLANs is when the SKB is setup & the VLAN is stripped from the frame. 4. TX VLAN is re-inserted by HOST OS based on the NDIS header. If it sees a VLAN in the frame the packet is dropped. Cc: xe-linux-external@cisco.com Cc: Sriram Krishnan Signed-off-by: Sriram Krishnan Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: Add XDP support

2020-01-25T09:43:19+00:00

This patch adds support of XDP in native mode for hv_netvsc driver, and transparently sets the XDP program on the associated VF NIC as well. Setting / unsetting XDP program on synthetic NIC (netvsc) propagates to VF NIC automatically. Setting / unsetting XDP program on VF NIC directly is not recommended, also not propagated to synthetic NIC, and may be overwritten by setting of synthetic NIC. The Azure/Hyper-V synthetic NIC receive buffer doesn't provide headroom for XDP. We thought about re-use the RNDIS header space, but it's too small. So we decided to copy the packets to a page buffer for XDP. And, most of our VMs on Azure have Accelerated Network (SRIOV) enabled, so most of the packets run on VF NIC. The synthetic NIC is considered as a fallback data-path. So the data copy on netvsc won't impact performance significantly. XDP program cannot run with LRO (RSC) enabled, so you need to disable LRO before running XDP: ethtool -K eth0 lro off XDP actions not yet supported: XDP_REDIRECT Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: Fix unwanted rx_table reset

2019-12-21T05:50:38+00:00

In existing code, the receive indirection table, rx_table, is in struct rndis_device, which will be reset when changing MTU, ringparam, etc. User configured receive indirection table values will be lost. To fix this, move rx_table to struct net_device_context, and check netif_is_rxfh_configured(), so rx_table will be set to default only if no user configured value. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

2019-11-30T22:50:51+00:00

Pull Hyper-V updates from Sasha Levin: - support for new VMBus protocols (Andrea Parri) - hibernation support (Dexuan Cui) - latency testing framework (Branden Bonaby) - decoupling Hyper-V page size from guest page size (Himadri Pandya) * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic drivers/hv: Replace binary semaphore with mutex drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86 HID: hyperv: Add the support of hibernation hv_balloon: Add the support of hibernation x86/hyperv: Implement hv_is_hibernation_supported() Drivers: hv: balloon: Remove dependencies on guest page size Drivers: hv: vmbus: Remove dependencies on guest page size x86: hv: Add function to allocate zeroed page for Hyper-V Drivers: hv: util: Specify ring buffer size using Hyper-V page size Drivers: hv: Specify receive buffer size using Hyper-V page size tools: hv: add vmbus testing tool drivers: hv: vmbus: Introduce latency testing video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host hv_netvsc: Add the support of hibernation hv_sock: Add the support of hibernation video: hyperv_fb: Add the support of hibernation scsi: storvsc: Add the support of hibernation Drivers: hv: vmbus: Add module parameter to cap the VMBus version ...

hv_netvsc: make recording RSS hash depend on feature flag

2019-11-24T02:42:41+00:00

The recording of RSS hash should be controlled by NETIF_F_RXHASH. Fixes: 1fac7ca4e63b ("hv_netvsc: record hardware hash in skb") Suggested-by: Eric Dumazet Signed-off-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Reviewed-by: Michael Kelley Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-11-23T00:27:24+00:00

Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit c8183f548902 ("s390/qeth: fix potential deadlock on workqueue flush"), removed the code which was removed by commit 9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code"). Signed-off-by: Jakub Kicinski

hv_netvsc: Fix offset usage in netvsc_send_table()

2019-11-22T03:32:23+00:00

To reach the data region, the existing code adds offset in struct nvsp_5_send_indirect_table on the beginning of this struct. But the offset should be based on the beginning of its container, struct nvsp_message. This bug causes the first table entry missing, and adds an extra zero from the zero pad after the data region. This can put extra burden on the channel 0. So, correct the offset usage. Also add a boundary check to ensure not reading beyond data region. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: Add the support of hibernation

2019-11-22T01:10:44+00:00

The existing netvsc_detach() and netvsc_attach() APIs make it easy to implement the suspend/resume callbacks. Signed-off-by: Dexuan Cui Reviewed-by: Haiyang Zhang Signed-off-by: Sasha Levin