kernel/linux.git/drivers/net/hyperv/hyperv_net.h, branch v4.19.112

hv_netvsc: Fix offset usage in netvsc_send_table()

2020-01-27T13:51:20+00:00

[ Upstream commit 71f21959dd5516031db4f011e15e9a9508b93a7d ] To reach the data region, the existing code adds offset in struct nvsp_5_send_indirect_table on the beginning of this struct. But the offset should be based on the beginning of its container, struct nvsp_message. This bug causes the first table entry missing, and adds an extra zero from the zero pad after the data region. This can put extra burden on the channel 0. So, correct the offset usage. Also add a boundary check to ensure not reading beyond data region. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

hv_netvsc: Fix unwanted rx_table reset

2020-01-12T11:17:23+00:00

[ Upstream commit b0689faa8efc5a3391402d7ae93bd373b7248e51 ] In existing code, the receive indirection table, rx_table, is in struct rndis_device, which will be reset when changing MTU, ringparam, etc. User configured receive indirection table values will be lost. To fix this, move rx_table to struct net_device_context, and check netif_is_rxfh_configured(), so rx_table will be set to default only if no user configured value. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

hv_netvsc: Fix unwanted wakeup after tx_disable

2019-04-17T06:38:39+00:00

[ Upstream commit 1b704c4a1ba95574832e730f23817b651db2aa59 ] After queue stopped, the wakeup mechanism may wake it up again when ring buffer usage is lower than a threshold. This may cause send path panic on NULL pointer when we stopped all tx queues in netvsc_detach and start removing the netvsc device. This patch fix it by adding a tx_disable flag to prevent unwanted queue wakeup. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Reported-by: Mohammed Gamal Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

hv_netvsc: Fix hash key value reset after other ops

2019-03-05T16:58:51+00:00

[ Upstream commit 17d91256898402daf4425cc541ac9cbf64574d9a ] Changing mtu, channels, or buffer sizes ops call to netvsc_attach(), rndis_set_subchannel(), which always reset the hash key to default value. That will override hash key changed previously. This patch fixes the problem by save the hash key, then restore it when we re- add the netvsc device. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang Reviewed-by: Michael Kelley [sl: fix up subject line] Signed-off-by: Sasha Levin

hv_netvsc: Add per-cpu ethtool stats for netvsc

2018-07-30T19:35:04+00:00

This patch implements following ethtool stats fields for netvsc: cpu_tx/rx_packets/bytes cpu_vf_tx/rx_packets/bytes Corresponding per-cpu counters already exist in current code. Exposing these counters will help troubleshooting performance issues. for_each_present_cpu() was used instead of for_each_possible_cpu(). for_each_possible_cpu() would create very long and useless output. It is still being used for internal buffer, but not for ethtool output. There could be an overflow if cpu was added between ethtool call netvsc_get_sset_count() and netvsc_get_ethtool_stats() and netvsc_get_strings(). (still safe if cpu was removed) ethtool makes these three function calls separately. As long as we use ethtool, I can't see any clean solution. Currently and in foreseeable short term, Hyper-V doesn't support cpu hot-plug. Plus, ethtool is for admin use. Unlikely the admin would perform such combo operations. Changes in v2: - Remove cpp style comment - Resubmit after freeze Changes in v3: - Reimplemented with kvmalloc instead of alloc_percpu Changes in v4: - Fixed inconsistent array size - Use kvmalloc_array instead of kvmalloc Signed-off-by: Yidong Ren Reviewed-by: Stephen Hemminger Signed-off-by: David S. Miller

hv_netvsc: split sub-channel setup into async and sync

2018-06-30T12:28:36+00:00

When doing device hotplug the sub channel must be async to avoid deadlock issues because device is discovered in softirq context. When doing changes to MTU and number of channels, the setup must be synchronous to avoid races such as when MTU and device settings are done in a single ip command. Reported-by: Thomas Walker Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Fixes: 732e49850c5e ("netvsc: fix race on sub channel creation") Signed-off-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload

2018-06-15T03:15:44+00:00

These fields in struct ndis_ipsecv2_offload and struct ndis_rsc_offload are one byte according to the specs. This patch defines them with the right size. These structs are not in use right now, but will be used soon. Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller

hv_netvsc: fix network namespace issues with VF support

2018-06-12T22:22:28+00:00

When finding the parent netvsc device, the search needs to be across all netvsc device instances (independent of network namespace). Find parent device of VF using upper_dev_get routine which searches only adjacent list. Fixes: e8ff40d4bff1 ("hv_netvsc: improve VF device matching") Signed-off-by: Stephen Hemminger netns aware byref Signed-off-by: David S. Miller

hv_netvsc: drop common code until callback model fixed

2018-06-12T22:22:28+00:00

The callback model of handling network failover is not suitable in the current form. 1. It was merged without addressing all the review feedback. 2. It was merged without approval of any of the netvsc maintainers. 3. Design discussion on how to handle PV/VF fallback is still not complete. 4. IMHO the code model using callbacks is trying to make something common which isn't. Revert the netvsc specific changes for now. Does not impact ongoing development of failover model for virtio. Revisit this after a simpler library based failover kernel routines are extracted. This reverts commit 9c6ffbacdb57 ("hv_netvsc: fix error return code in netvsc_probe()") and commit 1ff78076d8dd ("netvsc: refactor notifier/event handling code to use the failover framework") Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-06-10T20:01:12+00:00

Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...