kernel/linux.git/drivers/net/hyperv/hyperv_net.h, branch v4.14.286

hv_netvsc: Fix unwanted rx_table reset

2020-01-12T11:12:01+00:00

[ Upstream commit b0689faa8efc5a3391402d7ae93bd373b7248e51 ] In existing code, the receive indirection table, rx_table, is in struct rndis_device, which will be reset when changing MTU, ringparam, etc. User configured receive indirection table values will be lost. To fix this, move rx_table to struct net_device_context, and check netif_is_rxfh_configured(), so rx_table will be set to default only if no user configured value. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

hv_netvsc: Fix unwanted wakeup after tx_disable

2019-04-17T06:37:51+00:00

[ Upstream commit 1b704c4a1ba95574832e730f23817b651db2aa59 ] After queue stopped, the wakeup mechanism may wake it up again when ring buffer usage is lower than a threshold. This may cause send path panic on NULL pointer when we stopped all tx queues in netvsc_detach and start removing the netvsc device. This patch fix it by adding a tx_disable flag to prevent unwanted queue wakeup. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Reported-by: Mohammed Gamal Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: fix network namespace issues with VF support

2018-08-03T05:50:22+00:00

[ Upstream commit 7bf7bb37f16a80465ee3bd7c6c966f96f5a075a6 ] When finding the parent netvsc device, the search needs to be across all netvsc device instances (independent of network namespace). Find parent device of VF using upper_dev_get routine which searches only adjacent list. Fixes: e8ff40d4bff1 ("hv_netvsc: improve VF device matching") Signed-off-by: Stephen Hemminger netns aware byref Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

hv_netvsc: split sub-channel setup into async and sync

2018-07-22T12:28:43+00:00

[ Upstream commit 3ffe64f1a641b80a82d9ef4efa7a05ce69049871 ] When doing device hotplug the sub channel must be async to avoid deadlock issues because device is discovered in softirq context. When doing changes to MTU and number of channels, the setup must be synchronous to avoid races such as when MTU and device settings are done in a single ip command. Reported-by: Thomas Walker Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Fixes: 732e49850c5e ("netvsc: fix race on sub channel creation") Signed-off-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: common detach logic

2018-05-25T14:17:29+00:00

[ Commit 7b2ee50c0cd513a176a26a71f2989facdd75bfea upstream. ] Make common function for detaching internals of device during changes to MTU and RSS. Make sure no more packets are transmitted and all packets have been received before doing device teardown. Change the wait logic to be common and use usleep_range(). Changes transmit enabling logic so that transmit queues are disabled during the period when lower device is being changed. And enabled only after sub channels are setup. This avoids issue where it could be that a packet was being sent while subchannel was not initialized. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: empty current transmit aggregation if flow blocked

2018-05-25T14:17:27+00:00

[ Commit cfd8afd986cdb59ea9adac873c5082498a1eb7c0 upstream. ] If the transmit queue is known full, then don't keep aggregating data. And the cp_partial flag which indicates that the current aggregation buffer is full can be folded in to avoid more conditionals. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: preserve hw_features on mtu/channels/ringparam changes

2018-05-25T14:17:27+00:00

[ Commit aefd80e874e98a864915df5b7d90824a4340b450 upstream. ] rndis_filter_device_add() is called both from netvsc_probe() when we initially create the device and from set channels/mtu/ringparam routines where we basically remove the device and add it back. hw_features is reset in rndis_filter_device_add() and filled with host data. However, we lose all additional flags which are set outside of the driver, e.g. register_netdevice() adds NETIF_F_SOFT_FEATURES and many others. Unfortunately, calls to rndis_{query_hwcaps(), _set_offload_params()} calls cannot be avoided on every RNDIS reset: host expects us to set required features explicitly. Moreover, in theory hardware capabilities can change and we need to reflect the change in hw_features. Reset net->hw_features bits according to host data in rndis_netdev_set_hwcaps(), clear corresponding feature bits from net->features in case some features went missing (will never happen in real life I guess but let's be consistent). Signed-off-by: Vitaly Kuznetsov Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Rename tx_send_table to tx_table

2018-05-25T14:17:26+00:00

[ Commit 39e91cfbf6f5fb26ba64cc2e8874372baf1671e7 upstream. ] Simplify the variable name: tx_send_table Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Rename ind_table to rx_table

2018-05-25T14:17:26+00:00

[ Commit 47371300dfc269dd8d150e5b872bdbbda98ba809 upstream. ] Rename this variable because it is the Receive indirection table. Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Fix the TX/RX buffer default sizes

2018-03-24T10:01:22+00:00

[ Upstream commit 41f61db2cd24d5ad802386719cccde1479aa82a6 ] The values were not computed correctly. There are no significant visible impact, though. The intended size of RX buffer is 16 MB, and the default slot size is 1728. So, NETVSC_DEFAULT_RX should be 16*1024*1024 / 1728 = 9709. The intended size of TX buffer is 1 MB, and the slot size is 6144. So, NETVSC_DEFAULT_TX should be 1024*1024 / 6144 = 170. The patch puts the formula directly into the macro, and moves them to hyperv_net.h, together with related macros. Fixes: 5023a6db73196 ("netvsc: increase default receive buffer size") Signed-off-by: Haiyang Zhang Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman