kernel/linux.git/drivers/net/hamradio/6pack.c, branch v6.4

hamradio: 6pack: fix array-index-out-of-bounds in decode_std_command()

2022-06-17T10:39:46+00:00

Hulk Robot reports incorrect sp->rx_count_cooked value in decode_std_command(). This should be caused by the subtracting from sp->rx_count_cooked before. It seems that sp->rx_count_cooked value is changed to 0, which bypassed the previous judgment. The situation is shown below: (Thread 1) | (Thread 2) decode_std_command() | resync_tnc() ... | if (rest == 2) | sp->rx_count_cooked -= 2; | else if (rest == 3) | ... | sp->rx_count_cooked = 0; sp->rx_count_cooked -= 1; | for (i = 0; i < sp->rx_count_cooked; i++) // report error checksum += sp->cooked_buf[i]; sp->rx_count_cooked is a shared variable but is not protected by a lock. The same applies to sp->rx_count. This patch adds a lock to fix the bug. The fail log is shown below: ======================================================================= UBSAN: array-index-out-of-bounds in drivers/net/hamradio/6pack.c:925:31 index 400 is out of range for type 'unsigned char [400]' CPU: 3 PID: 7433 Comm: kworker/u10:1 Not tainted 5.18.0-rc5-00163-g4b97bac0756a #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound flush_to_ldisc Call Trace: dump_stack_lvl+0xcd/0x134 ubsan_epilogue+0xb/0x50 __ubsan_handle_out_of_bounds.cold+0x62/0x6c sixpack_receive_buf+0xfda/0x1330 tty_ldisc_receive_buf+0x13e/0x180 tty_port_default_receive_buf+0x6d/0xa0 flush_to_ldisc+0x213/0x3f0 process_one_work+0x98f/0x1620 worker_thread+0x665/0x1080 kthread+0x2e9/0x3a0 ret_from_fork+0x1f/0x30 ... Reported-by: Hulk Robot Signed-off-by: Xu Jia Signed-off-by: David S. Miller

drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()

2022-02-18T10:58:17+00:00

When a 6pack device is detaching, the sixpack_close() will act to cleanup necessary resources. Although del_timer_sync() in sixpack_close() won't return if there is an active timer, one could use mod_timer() in sp_xmit_on_air() to wake up timer again by calling userspace syscall such as ax25_sendmsg(), ax25_connect() and ax25_ioctl(). This unexpected waked handler, sp_xmit_on_air(), realizes nothing about the undergoing cleanup and may still call pty_write() to use driver layer resources that have already been released. One of the possible race conditions is shown below: (USE) | (FREE) ax25_sendmsg() | ax25_queue_xmit() | ... | sp_xmit() | sp_encaps() | sixpack_close() sp_xmit_on_air() | del_timer_sync(&sp->tx_t) mod_timer(&sp->tx_t,...) | ... | unregister_netdev() | ... (wait a while) | tty_release() | tty_release_struct() | release_tty() sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE pty_write(tty_struct) //USE | ... The corresponding fail log is shown below: =============================================================== BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470 Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0 ... Call Trace: ... queue_work_on+0x3f/0x50 pty_write+0xcd/0xe0pty_write+0xcd/0xe0 sp_xmit_on_air+0xb2/0x1f0 call_timer_fn+0x28/0x150 __run_timers.part.0+0x3c2/0x470 run_timer_softirq+0x3b/0x80 __do_softirq+0xf1/0x380 ... This patch reorders the del_timer_sync() after the unregister_netdev() to avoid UAF bugs. Because the unregister_netdev() is well synchronized, it flushs out any pending queues, waits the refcount of net_device decreases to zero and removes net_device from kernel. There is not any running routines after executing unregister_netdev(). Therefore, we could not arouse timer from userspace again. Signed-off-by: Duoming Zhou Reviewed-by: Lin Ma Signed-off-by: David S. Miller

tty: remove file from tty_ldisc_ops::ioctl and compat_ioctl

2021-11-25T17:36:27+00:00

After the previous patches, noone needs 'file' parameter in neither ioctl hook from tty_ldisc_ops. So remove 'file' from both of them. Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Andreas Koensgen Cc: Paul Mackerras Acked-by: Krzysztof Kozlowski [NFC] Acked-by: Dmitry Torokhov Acked-by: Marc Kleine-Budde Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20211122094529.24171-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

hamradio: remove needs_free_netdev to avoid UAF

2021-11-13T03:56:47+00:00

The former patch "defer 6pack kfree after unregister_netdev" reorders the kfree of two buffer after the unregister_netdev to prevent the race condition. It also adds free_netdev() function in sixpack_close(), which is a direct copy from the similar code in mkiss_close(). However, in sixpack driver, the flag needs_free_netdev is set to true in sp_setup(), hence the unregister_netdev() will free the netdev automatically. Therefore, as the sp is netdev_priv, use-after-free occurs. This patch removes the needs_free_netdev = true and just let the free_netdev to finish this deallocation task. Fixes: 0b9111922b1f ("hamradio: defer 6pack kfree after unregister_netdev") Signed-off-by: Lin Ma Link: https://lore.kernel.org/r/20211111141402.7551-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski

Merge tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-11-11T17:49:36+00:00

Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, can and netfilter. Current release - regressions: - bpf: do not reject when the stack read size is different from the tracked scalar size - net: fix premature exit from NAPI state polling in napi_disable() - riscv, bpf: fix RV32 broken build, and silence RV64 warning Current release - new code bugs: - net: fix possible NULL deref in sock_reserve_memory - amt: fix error return code in amt_init(); fix stopping the workqueue - ax88796c: use the correct ioctl callback Previous releases - always broken: - bpf: stop caching subprog index in the bpf_pseudo_func insn - security: fixups for the security hooks in sctp - nfc: add necessary privilege flags in netlink layer, limit operations to admin only - vsock: prevent unnecessary refcnt inc for non-blocking connect - net/smc: fix sk_refcnt underflow on link down and fallback - nfnetlink_queue: fix OOB when mac header was cleared - can: j1939: ignore invalid messages per standard - bpf, sockmap: - fix race in ingress receive verdict with redirect to self - fix incorrect sk_skb data_end access when src_reg = dst_reg - strparser, and tls are reusing qdisc_skb_cb and colliding - ethtool: fix ethtool msg len calculation for pause stats - vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to access an unregistering real_dev - udp6: make encap_rcv() bump the v6 not v4 stats - drv: prestera: add explicit padding to fix m68k build - drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge - drv: mvpp2: fix wrong SerDes reconfiguration order Misc & small latecomers: - ipvs: auto-load ipvs on genl access - mctp: sanity check the struct sockaddr_mctp padding fields - libfs: support RENAME_EXCHANGE in simple_rename() - avoid double accounting for pure zerocopy skbs" * tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits) selftests/net: udpgso_bench_rx: fix port argument net: wwan: iosm: fix compilation warning cxgb4: fix eeprom len when diagnostics not implemented net: fix premature exit from NAPI state polling in napi_disable() net/smc: fix sk_refcnt underflow on linkdown and fallback net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer() gve: fix unmatched u64_stats_update_end() net: ethernet: lantiq_etop: Fix compilation error selftests: forwarding: Fix packet matching in mirroring selftests vsock: prevent unnecessary refcnt inc for nonblocking connect net: marvell: mvpp2: Fix wrong SerDes reconfiguration order net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory net: stmmac: allow a tc-taprio base-time of zero selftests: net: test_vxlan_under_vrf: fix HV connectivity test net: hns3: allow configure ETS bandwidth of all TCs net: hns3: remove check VF uc mac exist when set by PF net: hns3: fix some mac statistics is always 0 in device version V2 net: hns3: fix kernel crash when unload VF while it is being reset net: hns3: sync rx ring head in echo common pull net: hns3: fix pfc packet number incorrect after querying pfc parameters ...

hamradio: defer 6pack kfree after unregister_netdev

2021-11-09T11:49:12+00:00

There is a possible race condition (use-after-free) like below (USE) | (FREE) dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | 6pack_close sp_xmit | kfree sp_encaps | | According to the patch "defer ax25 kfree after unregister_netdev", this patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by: Lin Ma Signed-off-by: David S. Miller

Merge tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-11-04T16:09:37+00:00

Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.16-rc1. Nothing major in here at all, just lots of tiny serial and tty driver updates for various reported things, and some good cleanups. These include: - more good tty api cleanups from Jiri - stm32 serial driver updates - softlockup fix for non-preempt systems under high serial load - rpmsg serial driver update - 8250 drivers updates and fixes - n_gsm line discipline fixes and updates as people are finally starting to use it. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits) tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE tty: rpmsg: Define tty name via constant string literal tty: rpmsg: Add pr_fmt() to prefix messages tty: rpmsg: Use dev_err_probe() in ->probe() tty: rpmsg: Unify variable used to keep an error code tty: rpmsg: Assign returned id to a local variable serial: stm32: push DMA RX data before suspending serial: stm32: terminate / restart DMA transfer at suspend / resume serial: stm32: rework RX dma initialization and release serial: 8250_pci: Remove empty stub pci_quatech_exit() serial: 8250_pci: Replace custom pci_match_id() implementation serial: xilinx_uartps: Fix race condition causing stuck TX serial: sunzilog: Mark sunzilog_putchar() __maybe_unused Revert "tty: hvc: pass DMA capable memory to put_chars()" Revert "virtio-console: remove unnecessary kmemdup()" serial: 8250_pci: Replace dev_*() by pci_*() macros serial: 8250_pci: Get rid of redundant 'else' keyword serial: 8250_pci: Refactor the loop in pci_ite887x_init() tty: add rpmsg driver ...

hamradio: use dev_addr_set() for setting device address

2021-10-13T16:41:37+00:00

Use dev_addr_set() instead of writing to netdev->dev_addr directly in hamradio drivers. Signed-off-by: Jakub Kicinski

Merge 5.15-rc3 into tty-next

2021-09-27T14:36:09+00:00

We need the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman

tty: remove file from tty_mode_ioctl

2021-09-22T14:59:13+00:00

The only user of 'file' parameter in tty_mode_ioctl is a BUG_ON check. Provided it never crashed for anyone, it's an overkill to pass the parameter to tty_mode_ioctl only for this check. If we wanted to check 'file' there, we should handle it in more graceful way anyway. Not by a BUG == crash. Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Andreas Koensgen Cc: Paul Mackerras Acked-by: Marc Kleine-Budde Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210914091134.17426-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman