kernel/linux.git/drivers/net/ethernet, branch v6.1.186

net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG

2026-08-23T12:18:36+00:00

[ Upstream commit 36a05d2820077bb3955acb8111e1041d39148037 ] On the packet reception path, the ID of the MAC Port on which the packet was received, is embedded in the RX DMA Descriptor's metadata. The ID is extracted using the helper function cppi5_desc_get_tags_ids() which fills in the 16-bit Source Tag into the 'port_id' variable. However, it is only the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID, while the upper 8-bits are Hardware-Reserved and carry an arbitrary value. With the existing logic, sporadic kernel crash is observed due to the subsequent driver code accessing out-of-bound memory because of an invalid port_id. Hence, fix the port_id extraction logic to use only the lower 8-bits of the Source Tag as the MAC Port ID. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Siddharth Vadapalli Reviewed-by: Chintan Vankar Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260807111738.2055900-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ice: fix memory leak in ice_lbtest_prepare_rings()

2026-08-23T12:18:33+00:00

[ Upstream commit 3a9de5590da4ffd9e9c541c4c4d492aa2b54cf6e ] ice_lbtest_prepare_rings() frees Rx rings only when ice_vsi_start_all_rx_rings() fails. If ice_vsi_setup_rx_rings() fails after allocating some descriptors, or if ice_vsi_cfg_lan() fails after the Rx rings were prepared, the function reaches the Tx cleanup path without releasing the initialized Rx resources. Fix this by adding separate unwind paths for Rx setup failure and LAN configuration failure. The Rx setup failure path releases the partially prepared Rx rings before freeing Tx rings, while later failures first undo the LAN Tx configuration and then release the Rx rings in reverse setup order. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an Intel E800 Series adapter available to run the ethtool offline loopback selftest, no runtime testing was able to be performed. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Cc: stable@vger.kernel.org Signed-off-by: Dawei Feng Reviewed-by: Jacob Keller Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ice: fix VF interrupts cleanup

2026-08-23T12:18:33+00:00

[ Upstream commit fb096882095e5a8d6b5159e43793d4a38a0c5b1f ] When a virtual function sends an IRQ map command, the PF will set up interrupts according to that request. However, because these interrupts are never reset, the next time Virtual Function initializes, the interrupts are still enabled for a given VF, which leads to performance degradation in certain cases due to interrupts being unexpectedly enabled and thus causing interrupt floods. Cc: stable@vger.kernel.org Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Suggested-by: Vladimir Medvedkin Reviewed-by: Aleksandr Loktionov Signed-off-by: Dawid Osuchowski Reviewed-by: Simon Horman Tested-by: Patryk Holda Signed-off-by: Tony Nguyen [ changed the file path for the `ice_vf_ena_rxq_interrupt` hunk from `ice/virt/queues.c` to `ice_virtchnl.c`, which predates the upstream directory split ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

igc: remove napi_synchronize() in igc_down()

2026-08-23T12:18:33+00:00

[ Upstream commit 5ffab5b9589c50e4cfc0cf36ffd76c89422d4019 ] When an AF_XDP zero-copy application is killed abruptly, the XSK pool is torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the full budget on every poll, so napi_complete_done() never clears NAPI_STATE_SCHED. igc_down() calls napi_synchronize() before napi_disable(), so it spins forever waiting for that bit and the interface never goes down. Drop the napi_synchronize() and let napi_disable() do the job -- it sets NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after polling has stopped, matching the recent igb fix b1e067240379. Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy") Suggested-by: Maciej Fijalkowski Cc: stable@vger.kernel.org Signed-off-by: David Carlier Reviewed-by: Maciej Fijalkowski Reviewed-by: Dima Ruinskiy Tested-by: Moriya Kadosh Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

octeontx2-pf: fix SQB pointer leak on init failure

2026-08-23T12:18:28+00:00

[ Upstream commit 62e7df6d042aeebd5efb581074e28865c04477be ] otx2_init_hw_resources() initializes SQ aura and pool resources before several later setup steps. On failure, err_free_sq_ptrs only frees SQB pages, leaving the per-SQ sqb_ptrs arrays behind. Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs even when sq->sqe has not been allocated yet. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an OcteonTX2 PF device and the corresponding AF mailbox setup to test with, no runtime testing was able to be performed. Fixes: caa2da34fd25 ("octeontx2-pf: Initialize and config queues") Cc: stable@vger.kernel.org Reviewed-by: Ratheesh Kannoth Signed-off-by: Dawei Feng Link: https://patch.msgid.link/20260630071625.349996-1-dawei.feng@seu.edu.cn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: macb: drop in-flight Tx SKBs on close

2026-08-23T12:18:27+00:00

[ Upstream commit 27f575836cfebbf872dec020428742b10650a955 ] The MACB driver has since forever leaked the outgoing SKBs that have not yet been marked as completed. They live in queue->tx_skb which gets freed without remorse nor checking. macb_free_consistent() gets called in a few codepaths, but only close will trigger the added expressions. In macb_open() and macb_alloc_consistent() failure cases, queues' tx_skb just got allocated and are empty. Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver") Cc: stable@vger.kernel.org Reviewed-by: Nicolai Buchwitz Signed-off-by: Théo Lebrun Link: https://patch.msgid.link/20260702-macb-drop-tx-v4-1-1c833eebdbc8@bootlin.com Signed-off-by: Paolo Abeni [ adjusted context to free each queue's Tx/Rx rings individually since 6.12 lacks the single-dma_alloc_coherent refactor ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF

2026-08-23T12:18:27+00:00

[ Upstream commit 8cdcf3d2caacdee7ddd363705fb4d93b0c1a0915 ] rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct index into the LMT map table to read another function's LMTLINE physical base address and copy it into the caller's own LMT map table entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the IRQ source, but req->base_pcifunc is a separate payload field and is not sanitized. Reject the request with -EPERM when a VF caller's base_pcifunc is not a valid function under its own PF. is_pf_func_valid() bounds the FUNC field to the PF's configured VF count, keeping the computed index inside the caller's own slot block. Fixes: 893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions") Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Link: https://patch.msgid.link/SYBPR01MB78811656934E713B77DA6CEDAFE62@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Jakub Kicinski [ Dropped `rvu->pdev` argument from `rvu_get_pf()` calls and folded in the `is_pf_func_valid()` de-static plus its `rvu.h` declaration from commit 2156a29aecff. ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: mana: Validate the packet length reported by the NIC

2026-08-23T12:18:26+00:00

[ Upstream commit 2e2a83b4998af4384e677d3b2ac08565274279bf ] Validate the packet length reported in the RX CQE before passing it to skb processing. The CQE is supplied by the NIC device and should not be blindly trusted. Cc: stable@vger.kernel.org Reviewed-by: Haiyang Zhang Signed-off-by: Dexuan Cui Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Link: https://patch.msgid.link/20260702041237.617719-2-decui@microsoft.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

octeontx2-vf: clear stale mailbox IRQ state before request_irq()

2026-08-23T12:18:22+00:00

[ Upstream commit 0b352f04b9be2c83c0240aa6dae7257fefa90464 ] otx2vf_register_mbox_intr() currently installs the VF mailbox IRQ handler before clearing stale mailbox interrupt state. The code then says that local interrupt bits should be cleared first to avoid spurious interrupts, but that clear still happens only after request_irq() has already made the handler reachable. A running system can reach this during VF mailbox interrupt registration while stale or latched RVU_VF_INT state is still present. If delivery happens in the request_irq()-to-clear window, otx2vf_vfaf_mbox_intr_handler() can run before local quiesce and touch the same vf->mbox and vf->mbox_wq carrier that probe and teardown later reuse or destroy. Move the stale mailbox interrupt clear ahead of request_irq(), but keep interrupt enabling after the handler is installed. This closes the pre-clear early-IRQ window without creating a new enable-before-handler window. Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Reviewed-by: Simon Horman Reviewed-by: Ratheesh Kannoth Link: https://patch.msgid.link/20260611160014.3202224-3-runyu.xiao@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

octeontx2-pf: clear stale mailbox IRQ state before request_irq()

2026-08-23T12:18:22+00:00

[ Upstream commit f918554fb7246e89b98ef90abe80801f038258b3 ] otx2_register_mbox_intr() currently installs the PF mailbox IRQ handler before clearing stale mailbox interrupt state. The function itself then comments that the local interrupt bits must be cleared first to avoid spurious interrupts, but that clear happens only after request_irq() has already exposed the handler to irq delivery. A running system can reach this during PF mailbox interrupt registration while stale or latched RVU_PF_INT state is still present. If delivery happens in the request_irq()-to-clear window, otx2_pfaf_mbox_intr_handler() can run before local quiesce and touch the same pf->mbox and pf->mbox_wq carrier that probe and teardown later reuse or destroy. Move the stale mailbox interrupt clear ahead of request_irq(), but keep interrupt enabling after the handler is installed. This closes the pre-clear early-IRQ window without creating a new enable-before-handler window. Fixes: 5a6d7c9daef3 ("octeontx2-pf: Mailbox communication with AF") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Reviewed-by: Simon Horman Reviewed-by: Ratheesh Kannoth Link: https://patch.msgid.link/20260611160014.3202224-2-runyu.xiao@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman