kernel/linux.git/drivers/net/ethernet, branch v6.1.178

net: lan743x: Initialize eth_syslock spinlock before use

2026-07-24T13:55:09+00:00

commit 39139b1c1c2b614096519b526112c726adb12ff0 upstream. lan743x_hardware_init() calls pci11x1x_strap_get_status() during the PCI11x1x probe sequence. That helper acquires the Ethernet subsystem hardware lock via lan743x_hs_syslock_acquire(), which relies on adapter->eth_syslock_spinlock to serialize access. The spinlock is currently initialized only after the strap status is read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized spinlock can trip the spinlock debug check. Fix by initializing adapter->eth_syslock_spinlock before reading the strap status so the probe path never attempts to lock an uninitialized spinlock. Fixes: 46b777ad9a8c ("net: lan743x: Add support to SGMII 1G and 2.5G") Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Andrea Righi Reviewed-by: David Thompson Reviewed-by: Thangaraj Samynathan Link: https://patch.msgid.link/20260626163218.3591486-1-arighi@nvidia.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

fsl/fman: Free init resources on KeyGen failure in fman_init()

2026-07-24T13:55:09+00:00

commit d288efa2b94abc2e45a061fceb156b4f4e5b37be upstream. fman_muram_alloc() allocates initialization resources before initializing the KeyGen block. If keygen_init() fails, the function returns -EINVAL directly and leaves those resources allocated. Free the initialization resources before returning from the KeyGen failure path. Fixes: 7472f4f281d0 ("fsl/fman: enable FMan Keygen") Cc: stable@kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Pavan Chebbi Reviewed-by: Breno Leitao Link: https://patch.msgid.link/20260625004834.3394389-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net: liquidio: fix BAR resource leak on PF number failure

2026-07-24T13:55:08+00:00

commit c63ee62a3c4ac1a1542f4c1a4b87e2f41df5a496 upstream. If cn23xx_get_pf_num() fails, the function returns without unmapping either BAR. Unmap both BARs before returning from the error path. Found by manual code review. Fixes: 0c45d7fe12c7 ("liquidio: fix use of pf in pass-through mode in a virtual machine") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Larysa Zaremba Link: https://patch.msgid.link/20260624064013.2809570-1-haoxiang_li2024@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()

2026-07-24T13:55:08+00:00

commit a986fde914d88af47eb78fd29c5d1af7952c3500 upstream. If the allocation of fp[i].tpa_info fails, the error path will not free the struct bnx2x_fastpath allocated earlier, as it is not linked to the bp structure yet. Fix that by linking it immediately after allocation. Cc: stable@vger.kernel.org Fixes: 15192a8cf8a8 ("bnx2x: Split the FP structure") Signed-off-by: Abdun Nihaal Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260620062402.89549-1-nihaal@cse.iitm.ac.in Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ena: clean up XDP TX queues when regular TX setup fails

2026-07-24T13:55:07+00:00

commit 1bd6676254b4ab6acd44b662b5e92822c036463a upstream. create_queues_with_size_backoff() creates XDP TX queues before setting up the regular TX path. If the subsequent allocation or creation of regular TX queues fails, the error handling paths omit the teardown of the XDP TX queues, leading to a resource leak. Fix this by explicitly destroying the XDP TX queue subset at the two missing failure points. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an ENA device to test with, no runtime testing was able to be performed. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Cc: stable@vger.kernel.org Signed-off-by: Dawei Feng Reviewed-by: Arthur Kiyanovski Tested-by: Arthur Kiyanovski Link: https://patch.msgid.link/20260616142424.4005130-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net/mlx5e: macsec: fix use-after-free of metadata_dst on RX SC delete

2026-07-24T13:55:07+00:00

commit de74d8fd10291763d97b218f09adcc7513c975e4 upstream. When an offloaded MACsec RX SC is deleted, macsec_del_rxsc_ctx() freed the per-SC metadata_dst with metadata_dst_free(), which kfree()s the object unconditionally and ignores the dst reference count. The RX datapath in mlx5e_macsec_offload_handle_rx_skb() looks up the SC under rcu_read_lock() via xa_load(), takes a reference with dst_hold() and attaches the dst to the skb with skb_dst_set(). A reader that already obtained the rx_sc pointer can race with the delete path and operate on freed memory. Fix the owner side by dropping the reference with dst_release() instead of freeing unconditionally, and convert the RX datapath to dst_hold_safe() so a reader racing the SC delete cannot attach a dst whose last reference was just dropped; only attach it when a reference was actually taken. mlx5e_macsec_add_rxsc() also published sc_xarray_element via xa_alloc() before rx_sc->md_dst was allocated and initialised, so a datapath reader that looked the SC up by fs_id could observe rx_sc with md_dst still NULL or, on weakly-ordered architectures, a non-NULL md_dst pointer whose contents were not yet visible. NULL-check the xa_load() result and md_dst on the datapath, and reorder add_rxsc() so the xa_alloc() publish happens only after md_dst is fully initialised; the xarray RCU publish then pairs with the rcu_read_lock()/xa_load() in the datapath. Note: macsec_del_rxsc_ctx() also kfree()s rx_sc->sc_xarray_element without an RCU grace period while the same datapath reads it under rcu_read_lock(); that is a separate pre-existing issue left to a follow-up patch. Found by 0sec automated security-research tooling (https://0sec.ai). Fixes: b7c9400cbc48 ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst") Cc: stable@vger.kernel.org Signed-off-by: Doruk Tan Ozturk Reviewed-by: Tariq Toukan Link: https://patch.msgid.link/20260627223059.29917-1-doruk@0sec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: sparx5: unregister blocking notifier on init failure

2026-07-24T13:55:05+00:00

commit 483be61b4a9a6df3b7cb277e8f189e082dee4cb8 upstream. sparx5_register_notifier_blocks() registers the switchdev blocking notifier before allocating the ordered workqueue. If the workqueue allocation fails, the error path unregisters the switchdev and netdevice notifiers, but leaves the blocking notifier registered. Add a separate error label for the workqueue allocation failure path and unregister the switchdev blocking notifier there. Fixes: d6fce5141929 ("net: sparx5: add switching support") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260623115714.2192074-1-haoxiang_li2024@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

mlxsw: fix refcount leak in mlxsw_sp_vrs_lpm_tree_replace()

2026-07-24T13:54:57+00:00

commit 21cf8dc478a49e8de039c2739b1646a774cb1944 upstream. When mlxsw_sp_vrs_lpm_tree_replace() fails after replacing some VRs, the error rollback loop does not correctly revert the preceding replacements. The loop decrements the index but fails to update the vr pointer, which still points to the VR that caused the failure. As a result, the condition and the rollback call always operate on the same VR, potentially calling mlxsw_sp_vr_lpm_tree_replace() multiple times on it while never rolling back the earlier VRs. Those VRs continue to hold a reference to new_tree acquired via mlxsw_sp_lpm_tree_hold(), leaking the reference count of new_tree. Fix by reinitializing vr inside the error loop with the updated index: vr = &mlxsw_sp->router->vrs[i]; so that the loop correctly iterates over all VRs that were actually replaced. Cc: stable@vger.kernel.org Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") Signed-off-by: Wentao Liang Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260609084730.215732-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

octeontx2-af: fix VF bringup affecting PF promiscuous state

2026-07-24T13:54:57+00:00

[ Upstream commit fabb881df322da25442f98d23f5fa371e3c78ec4 ] Mbox handling of nix_set_rx_mode for a VF with promiscuous and all_multi flags set to false causes deletion of the PF's promiscuous and allmulti MCAM rules. This occurs because the APIs that enable/disable these rules operate only on the PF, even when the mbox request is made via a VF interface. Guard both rvu_npc_enable_allmulti_entry() and rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so that a VF bringing up or tearing down its interface cannot inadvertently clear the PF's MCAM rules. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Harman Kalra Signed-off-by: Nitin Shetty J Link: https://patch.msgid.link/20260702045616.3002773-2-nshettyj@marvell.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net/mlx5: Fix L3 tunnel entropy refcount leak

2026-07-24T13:54:57+00:00

[ Upstream commit c914307e1d41c2cb7bcdcbfde4cd2f214f6aa027 ] mlx5_tun_entropy_refcount_inc() counts both VXLAN and L2-to-L3 tunnel reformat entries as entropy-enabling users. The matching decrement path only handled VXLAN, leaving L2-to-L3 tunnel entries counted after release. Handle MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL in mlx5_tun_entropy_refcount_dec() as well so the enabling entry refcount remains balanced. Fixes: f828ca6a2fb6 ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP") Signed-off-by: Li RongQing Reviewed-by: Simon Horman Reviewed-by: Tariq Toukan Link: https://patch.msgid.link/20260703141423.1723-1-lirongqing@baidu.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin