kernel/linux.git/drivers/net/ethernet, branch v6.1.124

sky2: Add device ID 11ab:4373 for Marvell 88E8075

2025-01-09T12:30:06+00:00

commit 03c8d0af2e409e15c16130b185e12b5efba0a6b9 upstream. A Marvell 88E8075 ethernet controller has this device ID instead of 11ab:4370 and works fine with the sky2 driver. Signed-off-by: Pascal Hambourg Cc: stable@vger.kernel.org Link: https://patch.msgid.link/10165a62-99fb-4be6-8c64-84afd6234085@plouf.fr.eu.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: mv643xx_eth: fix an OF node reference leak

2025-01-09T12:30:01+00:00

[ Upstream commit ad5c318086e2e23b577eca33559c5ebf89bc7eb9 ] Current implementation of mv643xx_eth_shared_of_add_port() calls of_parse_phandle(), but does not release the refcount on error. Call of_node_put() in the error path and in mv643xx_eth_shared_of_remove(). This bug was found by an experimental verification tool that I am developing. Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support") Signed-off-by: Joe Hattori Link: https://patch.msgid.link/20241221081448.3313163-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

eth: bcmsysport: fix call balance of priv->clk handling routines

2025-01-09T12:30:01+00:00

[ Upstream commit b255ef45fcc2141c1bf98456796abb956d843a27 ] Check the return value of clk_prepare_enable to ensure that priv->clk has been successfully enabled. If priv->clk was not enabled during bcm_sysport_probe, bcm_sysport_resume, or bcm_sysport_open, it must not be disabled in any subsequent execution paths. Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources") Signed-off-by: Vitalii Mordan Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20241227123007.2333397-1-mordan@ispras.ru Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: Fix netns for ip_tunnel_init_flow()

2025-01-09T12:30:00+00:00

[ Upstream commit b5a7b661a073727219fedc35f5619f62418ffe72 ] The device denoted by tunnel->parms.link resides in the underlay net namespace. Therefore pass tunnel->net to ip_tunnel_init_flow(). Fixes: db53cd3d88dc ("net: Handle l3mdev in ip_tunnel_init_flow") Signed-off-by: Xiao Liang Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20241219130336.103839-1-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: stmmac: restructure the error path of stmmac_probe_config_dt()

2025-01-09T12:29:59+00:00

[ Upstream commit 2b6ffcd7873b7e8a62c3e15a6f305bfc747c466b ] Current implementation of stmmac_probe_config_dt() does not release the OF node reference obtained by of_parse_phandle() in some error paths. The problem is that some error paths call stmmac_remove_config_dt() to clean up but others use and unwind ladder. These two types of error handling have not kept in sync and have been a recurring source of bugs. Re-write the error handling in stmmac_probe_config_dt() to use an unwind ladder. Consequently, stmmac_remove_config_dt() is not needed anymore, thus remove it. This bug was found by an experimental verification tool that I am developing. Fixes: 4838a5405028 ("net: stmmac: Fix wrapper drivers not detecting PHY") Signed-off-by: Joe Hattori Link: https://patch.msgid.link/20241219024119.2017012-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: stmmac: don't create a MDIO bus if unnecessary

2025-01-09T12:29:59+00:00

[ Upstream commit f3c2caacee824ce4a331cdafb0b8dc8e987f105e ] Currently a MDIO bus is created if the devicetree description is either: 1. Not fixed-link 2. fixed-link but contains a MDIO bus as well The "1" case above isn't always accurate. If there's a phy-handle, it could be referencing a phy on another MDIO controller's bus[1]. In this case, where the MDIO bus is not described at all, currently stmmac will make a MDIO bus and scan its address space to discover phys (of which there are none). This process takes time scanning a bus that is known to be empty, delaying time to complete probe. There are also a lot of upstream devicetrees[2] that expect a MDIO bus to be created, scanned for phys, and the first one found connected to the MAC. This case can be inferred from the platform description by not having a phy-handle && not being fixed-link. This hits case "1" in the current driver's logic, and must be handled in any logic change here since it is a valid legacy dt-binding. Let's improve the logic to create a MDIO bus if either: - Devicetree contains a MDIO bus - !fixed-link && !phy-handle (legacy handling) This way the case where no MDIO bus should be made is handled, as well as retaining backwards compatibility with the valid cases. Below devicetree snippets can be found that explain some of the cases above more concretely. Here's[0] a devicetree example where the MAC is both fixed-link and driving a switch on MDIO (case "2" above). This needs a MDIO bus to be created: &fec1 { phy-mode = "rmii"; fixed-link { speed = <100>; full-duplex; }; mdio1: mdio { switch0: switch0@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; }; }; }; Here's[1] an example where there is no MDIO bus or fixed-link for the ethernet1 MAC, so no MDIO bus should be created since ethernet0 is the MDIO master for ethernet1's phy: ðernet0 { phy-mode = "sgmii"; phy-handle = <&sgmii_phy0>; mdio { compatible = "snps,dwmac-mdio"; sgmii_phy0: phy@8 { compatible = "ethernet-phy-id0141.0dd4"; reg = <0x8>; device_type = "ethernet-phy"; }; sgmii_phy1: phy@a { compatible = "ethernet-phy-id0141.0dd4"; reg = <0xa>; device_type = "ethernet-phy"; }; }; }; ðernet1 { phy-mode = "sgmii"; phy-handle = <&sgmii_phy1>; }; Finally there's descriptions like this[2] which don't describe the MDIO bus but expect it to be created and the whole address space scanned for a phy since there's no phy-handle or fixed-link described: &gmac { phy-supply = <&vcc_lan>; phy-mode = "rmii"; snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; }; [0] https://elixir.bootlin.com/linux/v6.5-rc5/source/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts [1] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/qcom/sa8775p-ride.dts [2] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/rockchip/rk3368-r88.dts#L164 Reviewed-by: Serge Semin Co-developed-by: Bartosz Golaszewski Signed-off-by: Bartosz Golaszewski Signed-off-by: Andrew Halaney Signed-off-by: David S. Miller Stable-dep-of: 2b6ffcd7873b ("net: stmmac: restructure the error path of stmmac_probe_config_dt()") Signed-off-by: Sasha Levin

net: stmmac: platform: provide devm_stmmac_probe_config_dt()

2025-01-09T12:29:59+00:00

[ Upstream commit d74065427374da6659a2d7fad4ec55c8926d43c4 ] Provide a devres variant of stmmac_probe_config_dt() that allows users to skip calling stmmac_remove_config_dt() at driver detach. Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20230623100417.93592-9-brgl@bgdev.pl Signed-off-by: Jakub Kicinski Stable-dep-of: 2b6ffcd7873b ("net: stmmac: restructure the error path of stmmac_probe_config_dt()") Signed-off-by: Sasha Levin

net/mlx5e: Don't call cleanup on profile rollback failure

2025-01-02T09:30:53+00:00

[ Upstream commit 4dbc1d1a9f39c3711ad2a40addca04d07d9ab5d0 ] When profile rollback fails in mlx5e_netdev_change_profile, the netdev profile var is left set to NULL. Avoid a crash when unloading the driver by not calling profile->cleanup in such a case. This was encountered while testing, with the original trigger that the wq rescuer thread creation got interrupted (presumably due to Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by mlx5e_priv_init, the profile rollback also fails for the same reason (signal still active) so the profile is left as NULL, leading to a crash later in _mlx5e_remove. [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2) [ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12 [ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 745.538222] #PF: supervisor read access in kernel mode [ 745.551290] Call Trace: [ 745.551590] [ 745.551866] ? __die+0x20/0x60 [ 745.552218] ? page_fault_oops+0x150/0x400 [ 745.555307] ? exc_page_fault+0x79/0x240 [ 745.555729] ? asm_exc_page_fault+0x22/0x30 [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core] [ 745.556698] auxiliary_bus_remove+0x18/0x30 [ 745.557134] device_release_driver_internal+0x1df/0x240 [ 745.557654] bus_remove_device+0xd7/0x140 [ 745.558075] device_del+0x15b/0x3c0 [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core] [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core] [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core] [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core] [ 745.560694] pci_device_remove+0x39/0xa0 [ 745.561112] device_release_driver_internal+0x1df/0x240 [ 745.561631] driver_detach+0x47/0x90 [ 745.562022] bus_remove_driver+0x84/0x100 [ 745.562444] pci_unregister_driver+0x3b/0x90 [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core] [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0 [ 745.563886] ? kmem_cache_free+0x1b0/0x460 [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190 [ 745.564825] do_syscall_64+0x6d/0x140 [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 745.565725] RIP: 0033:0x7f1579b1288b Fixes: 3ef14e463f6e ("net/mlx5e: Separate between netdev objects and mlx5e profiles initialization") Signed-off-by: Cosmin Ratiu Reviewed-by: Dragos Tatulea Signed-off-by: Tariq Toukan Signed-off-by: Paolo Abeni Signed-off-by: Jianqi Ren Signed-off-by: Sasha Levin

chelsio/chtls: prevent potential integer overflow on 32bit

2024-12-27T12:52:55+00:00

commit fbbd84af6ba70334335bdeba3ae536cf751c14c6 upstream. The "gl->tot_len" variable is controlled by the user. It comes from process_responses(). On 32bit systems, the "gl->tot_len + sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition could have an integer wrapping bug. Use size_add() to prevent this. Fixes: a08943947873 ("crypto: chtls - Register chtls with net tls") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Reviewed-by: Simon Horman Link: https://patch.msgid.link/c6bfb23c-2db2-4e1b-b8ab-ba3925c82ef5@stanley.mountain Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ethernet: bgmac-platform: fix an OF node reference leak

2024-12-27T12:52:55+00:00

[ Upstream commit 0cb2c504d79e7caa3abade3f466750c82ad26f01 ] The OF node obtained by of_parse_phandle() is not freed. Call of_node_put() to balance the refcount. This bug was found by an experimental static analysis tool that I am developing. Fixes: 1676aba5ef7e ("net: ethernet: bgmac: device tree phy enablement") Signed-off-by: Joe Hattori Reviewed-by: Simon Horman Link: https://patch.msgid.link/20241214014912.2810315-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin