kernel/linux.git/drivers/net/ethernet, branch v4.19.39

net: ethernet: ti: fix possible object reference leak

2019-05-04T07:20:19+00:00

[ Upstream commit 75eac7b5f68b0a0671e795ac636457ee27cc11d8 ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. ./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Wingman Kwok Cc: Murali Karicheri Cc: "David S. Miller" Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

net: ibm: fix possible object reference leak

2019-05-04T07:20:19+00:00

[ Upstream commit be693df3cf9dd113ff1d2c0d8150199efdba37f6 ] The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Douglas Miller Cc: "David S. Miller" Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

net: xilinx: fix possible object reference leak

2019-05-04T07:20:18+00:00

[ Upstream commit fa3a419d2f674b431d38748cb58fb7da17ee8949 ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Anirudha Sarangi Cc: John Linn Cc: "David S. Miller" Cc: Michal Simek Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

net: macb: Add null check for PCLK and HCLK

2019-05-04T07:20:17+00:00

[ Upstream commit cd5afa91f078c0787be0a62b5ef90301c00b0271 ] Both PCLK and HCLK are "required" clocks according to macb devicetree documentation. There is a chance that devm_clk_get doesn't return a negative error but just a NULL clock structure instead. In such a case the driver proceeds as usual and uses pclk value 0 to calculate MDC divisor which is incorrect. Hence fix the same in clock initialization. Signed-off-by: Harini Katakam Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

net: ks8851: Set initial carrier state to down

2019-05-04T07:20:16+00:00

[ Upstream commit 9624bafa5f6418b9ca5b3f66d1f6a6a2e8bf6d4c ] The ks8851 chip's initial carrier state is down. A Link Change Interrupt is signaled once interrupts are enabled if the carrier is up. The ks8851 driver has it backwards by assuming that the initial carrier state is up. The state is therefore misrepresented if the interface is opened with no cable attached. Fix it. The Link Change interrupt is sometimes not signaled unless the P1MBSR register (which contains the Link Status bit) is read on ->ndo_open(). This might be a hardware erratum. Read the register by calling mii_check_link(), which has the desirable side effect of setting the carrier state to down if the cable was detached while the interface was closed. Signed-off-by: Lukas Wunner Cc: Frank Pavlic Cc: Ben Dooks Cc: Tristram Ha Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

net: ks8851: Delay requesting IRQ until opened

2019-05-04T07:20:16+00:00

[ Upstream commit d268f31552794abf5b6aa5af31021643411f25f5 ] The ks8851 driver currently requests the IRQ before registering the net_device. Because the net_device name is used as IRQ name and is still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs apart if multiple ks8851 chips are present. Most other drivers delay requesting the IRQ until the net_device is opened. Do the same. The driver doesn't enable interrupts on the chip before opening the net_device and disables them when closing it, so there doesn't seem to be a need to request the IRQ already on probe. Signed-off-by: Lukas Wunner Cc: Frank Pavlic Cc: Ben Dooks Cc: Tristram Ha Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

net: ks8851: Reassert reset pin if chip ID check fails

2019-05-04T07:20:15+00:00

[ Upstream commit 761cfa979a0c177d6c2d93ef5585cd79ae49a7d5 ] Commit 73fdeb82e963 ("net: ks8851: Add optional vdd_io regulator and reset gpio") amended the ks8851 driver to briefly assert the chip's reset pin on probe. It also amended the probe routine's error path to reassert the reset pin if a subsequent initialization step fails. However the commit misplaced reassertion of the reset pin in the error path such that it is not performed if the check of the Chip ID and Enable Register (CIDER) fails. The error path is therefore slightly asymmetrical to the probe routine's body. Fix it. Signed-off-by: Lukas Wunner Cc: Frank Pavlic Cc: Stephen Boyd Cc: Nishanth Menon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

net: ks8851: Dequeue RX packets explicitly

2019-05-04T07:20:15+00:00

[ Upstream commit 536d3680fd2dab5c39857d62a3e084198fc74ff9 ] The ks8851 driver lets the chip auto-dequeue received packets once they have been read in full. It achieves that by setting the ADRFE flag in the RXQCR register ("Auto-Dequeue RXQ Frame Enable"). However if allocation of a packet's socket buffer or retrieval of the packet over the SPI bus fails, the packet will not have been read in full and is not auto-dequeued. Such partial retrieval of a packet confuses the chip's RX queue management: On the next RX interrupt, the first packet read from the queue will be the one left there previously and this one can be retrieved without issues. But for any newly received packets, the frame header status and byte count registers (RXFHSR and RXFHBCR) contain bogus values, preventing their retrieval. The chip allows explicitly dequeueing a packet from the RX queue by setting the RRXEF flag in the RXQCR register ("Release RX Error Frame"). This could be used to dequeue the packet in case of an error, but if that error is a failed SPI transfer, it is unknown if the packet was transferred in full and was auto-dequeued or if it was only transferred in part and requires an explicit dequeue. The safest approach is thus to always dequeue packets explicitly and forgo auto-dequeueing. Without this change, I've witnessed packet retrieval break completely when an SPI DMA transfer fails, requiring a chip reset. Explicit dequeueing magically fixes this and makes packet retrieval absolutely robust for me. The chip's documentation suggests auto-dequeuing and uses the RRXEF flag only to dequeue error frames which the driver doesn't want to retrieve. But that seems to be a fair-weather approach. Signed-off-by: Lukas Wunner Cc: Frank Pavlic Cc: Ben Dooks Cc: Tristram Ha Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

qlcnic: Avoid potential NULL pointer dereference

2019-05-04T07:20:12+00:00

[ Upstream commit 5bf7295fe34a5251b1d241b9736af4697b590670 ] netdev_alloc_skb can fail and return a NULL pointer which is dereferenced without a check. The patch avoids such a scenario. Signed-off-by: Aditya Pakki Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

net: stmmac: don't set own bit too early for jumbo frames

2019-05-04T07:20:11+00:00

[ Upstream commit 80acbed9f8fca1db3fbe915540b756f048aa0fd7 ] Commit 0e80bdc9a72d ("stmmac: first frame prep at the end of xmit routine") overlooked jumbo frames when re-ordering the code, and as a result the own bit was not getting set anymore for the first jumbo frame descriptor. Commit 487e2e22ab79 ("net: stmmac: Set OWN bit for jumbo frames") tried to fix this, but now the bit is getting set too early and the DMA may start while we are still setting up the remaining descriptors. And with the chain mode the own bit remains still unset. Fix by setting the own bit at the end of xmit also with jumbo frames. Fixes: 0e80bdc9a72d ("stmmac: first frame prep at the end of xmit routine") Fixes: 487e2e22ab79 ("net: stmmac: Set OWN bit for jumbo frames") Signed-off-by: Aaro Koskinen Acked-by: Jose Abreu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)