kernel/linux.git/drivers/net/ethernet/sun, branch v6.2

treewide: Convert del_timer() to timer_shutdown()

2022-12-25T21:38:09+00:00

Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) Acked-by: Pavel Machek [ LED ] Acked-by: Kalle Valo [ wireless ] Acked-by: Paolo Abeni [ networking ] Signed-off-by: Linus Torvalds

sunvnet: Use kmap_local_page() instead of kmap_atomic()

2022-11-25T10:44:01+00:00

kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local() respectively. Note that kmap_atomic() disables preemption and page-fault processing, but kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has to check if the code being executed between the map/unmap implicitly depends on page-faults and/or preemption being disabled. If yes, then code to disable page-faults and/or preemption should also be added for functional correctness. That however doesn't appear to be the case here, so just kmap_local_page() is used. Also note that the page being mapped is not allocated by the driver, and so the driver doesn't know if the page is in normal memory. This is the reason kmap_local_page() is used as opposed to page_address(). I don't have hardware, so this change has only been compile tested. Cc: Ira Weiny Cc: Fabio M. De Francesco Signed-off-by: Anirudh Venkataramanan Signed-off-by: David S. Miller

cassini: Use memcpy_from_page() instead of k[un]map_atomic()

2022-11-25T10:44:01+00:00

kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace the map-memcpy-unmap usage pattern (done using k[un]map_atomic()) with memcpy_from_page(), which internally uses kmap_local_page() and kunmap_local(). This renders the variable 'vaddr' unnecessary, and so remove this too. Note that kmap_atomic() disables preemption and page-fault processing, but kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has to check if the code being executed between the map/unmap implicitly depends on page-faults and/or preemption being disabled. If yes, then code to disable page-faults and/or preemption should also be added for functional correctness. That however doesn't appear to be the case here, so just memcpy_from_page() is used. Also note that the page being mapped is not allocated by the driver, and so the driver doesn't know if the page is in normal memory. This is the reason kmap_local_page() is used (via memcpy_from_page()) as opposed to page_address(). I don't have hardware, so this change has only been compile tested. Cc: Ira Weiny Cc: Fabio M. De Francesco Suggested-by: Fabio M. De Francesco Signed-off-by: Anirudh Venkataramanan Signed-off-by: David S. Miller

cassini: Use page_address() instead of kmap_atomic()

2022-11-25T10:44:01+00:00

Pages for Rx buffers are allocated in cas_page_alloc() using either GFP_ATOMIC or GFP_KERNEL. Memory allocated with GFP_KERNEL/GFP_ATOMIC can't come from highmem and so there's no need to kmap() them. Just use page_address() instead. This makes the variable 'addr' unnecessary, so remove it too. Note that kmap_atomic() disables preemption and page-fault processing, but page_address() doesn't. When removing uses of kmap_atomic(), one has to check if the code being executed between the map/unmap implicitly depends on page-faults and/or preemption being disabled. If yes, then code to disable page-faults and/or preemption should also be added for functional correctness. That however doesn't appear to be the case here, so just page_address() is used. I don't have hardware, so this change has only been compile tested. Cc: Ira Weiny Cc: Fabio M. De Francesco Signed-off-by: Anirudh Venkataramanan Signed-off-by: David S. Miller

sunhme: Uninitialized variable in happy_meal_init()

2022-10-15T10:14:24+00:00

The "burst" string is only initialized for CONFIG_SPARC. It should be set to "64" because that's what is used by PCI. Fixes: 24cddbc3ef11 ("sunhme: Combine continued messages") Signed-off-by: Dan Carpenter Reviewed-by: Sean Anderson Signed-off-by: David S. Miller

sunhme: fix an IS_ERR() vs NULL check in probe

2022-10-13T16:34:09+00:00

The devm_request_region() function does not return error pointers, it returns NULL on error. Fixes: 914d9b2711dd ("sunhme: switch to devres") Signed-off-by: Dan Carpenter Reviewed-by: Sean Anderson Reviewed-by: Rolf Eike Beer Link: https://lore.kernel.org/r/Y0bWzJL8JknX8MUf@kili Signed-off-by: Jakub Kicinski

net: sunhme: Fix undersized zeroing of quattro->happy_meals

2022-09-29T02:18:42+00:00

Just use kzalloc instead. Fixes: d6f1e89bdbb8 ("sunhme: Return an ERR_PTR from quattro_pci_find") Reported-by: kernel test robot Signed-off-by: Sean Anderson Link: https://lore.kernel.org/r/20220928004157.279731-1-seanga2@gmail.com Signed-off-by: Jakub Kicinski

net: drop the weight argument from netif_napi_add

2022-09-29T01:57:14+00:00

We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

sunhme: Use vdbg for spam-y prints

2022-09-27T00:45:38+00:00

The SXD, TXD, and RXD macros are used only once (or twice). Just use the vdbg print, which seems to have been devised for these sorts of very verbose messages. Signed-off-by: Sean Anderson Signed-off-by: Jakub Kicinski

sunhme: Combine continued messages

2022-09-27T00:45:38+00:00

This driver seems to have been written under the assumption that messages can be continued arbitrarily. I'm not when this changed (if ever), but such ad-hoc continuations are liable to be rudely interrupted. Convert all such instances to single prints. This loses a bit of timing information (such as when a line was constructed piecemeal as the function executed), but it's easy to add a few prints if necessary. This also adds newlines to the ends of any prints without them. Since (almost every) debug print included the name of the function, include it automatically. Signed-off-by: Sean Anderson Signed-off-by: Jakub Kicinski

kernel/linux.git/drivers/net/ethernet/sun, branch v6.2

treewide: Convert del_timer*() to timer_shutdown*()

sunvnet: Use kmap_local_page() instead of kmap_atomic()

cassini: Use memcpy_from_page() instead of k[un]map_atomic()

cassini: Use page_address() instead of kmap_atomic()

sunhme: Uninitialized variable in happy_meal_init()

sunhme: fix an IS_ERR() vs NULL check in probe

net: sunhme: Fix undersized zeroing of quattro->happy_meals

net: drop the weight argument from netif_napi_add

sunhme: Use vdbg for spam-y prints

sunhme: Combine continued messages

treewide: Convert del_timer() to timer_shutdown()