kernel/linux.git/drivers/net/ethernet/stmicro, branch v5.19

stmmac: dwmac-mediatek: fix resource leak in probe

2022-07-28T17:43:04+00:00

If mediatek_dwmac_clks_config() fails, then call stmmac_remove_config_dt() before returning. Otherwise it is a resource leak. Fixes: fa4b3ca60e80 ("stmmac: dwmac-mediatek: fix clock issue") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/YuJ4aZyMUlG6yGGa@kili Signed-off-by: Jakub Kicinski

net: stmmac: remove redunctant disable xPCS EEE call

2022-07-19T03:15:45+00:00

Disable is done in stmmac_init_eee() on the event of MAC link down. Since setting enable/disable EEE via ethtool will eventually trigger a MAC down, removing this redunctant call in stmmac_ethtool.c to avoid calling xpcs_config_eee() twice. Fixes: d4aeaed80b0e ("net: stmmac: trigger PCS EEE to turn off on link down") Signed-off-by: Wong Vee Khee Link: https://lore.kernel.org/r/20220715122402.1017470-1-vee.khee.wong@linux.intel.com Signed-off-by: Jakub Kicinski

net: stmmac: fix dma queue left shift overflow issue

2022-07-18T10:30:26+00:00

When queue number is > 4, left shift overflows due to 32 bits integer variable. Mask calculation is wrong for MTL_RXQ_DMA_MAP1. If CONFIG_UBSAN is enabled, kernel dumps below warning: [ 10.363842] ================================================================== [ 10.363882] UBSAN: shift-out-of-bounds in /build/linux-intel-iotg-5.15-8e6Tf4/ linux-intel-iotg-5.15-5.15.0/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:224:12 [ 10.363929] shift exponent 40 is too large for 32-bit type 'unsigned int' [ 10.363953] CPU: 1 PID: 599 Comm: NetworkManager Not tainted 5.15.0-1003-intel-iotg [ 10.363956] Hardware name: ADLINK Technology Inc. LEC-EL/LEC-EL, BIOS 0.15.11 12/22/2021 [ 10.363958] Call Trace: [ 10.363960] [ 10.363963] dump_stack_lvl+0x4a/0x5f [ 10.363971] dump_stack+0x10/0x12 [ 10.363974] ubsan_epilogue+0x9/0x45 [ 10.363976] __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e [ 10.363979] ? wake_up_klogd+0x4a/0x50 [ 10.363983] ? vprintk_emit+0x8f/0x240 [ 10.363986] dwmac4_map_mtl_dma.cold+0x42/0x91 [stmmac] [ 10.364001] stmmac_mtl_configuration+0x1ce/0x7a0 [stmmac] [ 10.364009] ? dwmac410_dma_init_channel+0x70/0x70 [stmmac] [ 10.364020] stmmac_hw_setup.cold+0xf/0xb14 [stmmac] [ 10.364030] ? page_pool_alloc_pages+0x4d/0x70 [ 10.364034] ? stmmac_clear_tx_descriptors+0x6e/0xe0 [stmmac] [ 10.364042] stmmac_open+0x39e/0x920 [stmmac] [ 10.364050] __dev_open+0xf0/0x1a0 [ 10.364054] __dev_change_flags+0x188/0x1f0 [ 10.364057] dev_change_flags+0x26/0x60 [ 10.364059] do_setlink+0x908/0xc40 [ 10.364062] ? do_setlink+0xb10/0xc40 [ 10.364064] ? __nla_validate_parse+0x4c/0x1a0 [ 10.364068] __rtnl_newlink+0x597/0xa10 [ 10.364072] ? __nla_reserve+0x41/0x50 [ 10.364074] ? __kmalloc_node_track_caller+0x1d0/0x4d0 [ 10.364079] ? pskb_expand_head+0x75/0x310 [ 10.364082] ? nla_reserve_64bit+0x21/0x40 [ 10.364086] ? skb_free_head+0x65/0x80 [ 10.364089] ? security_sock_rcv_skb+0x2c/0x50 [ 10.364094] ? __cond_resched+0x19/0x30 [ 10.364097] ? kmem_cache_alloc_trace+0x15a/0x420 [ 10.364100] rtnl_newlink+0x49/0x70 This change fixes MTL_RXQ_DMA_MAP1 mask issue and channel/queue mapping warning. Fixes: d43042f4da3e ("net: stmmac: mapping mtl rx to dma channel") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216195 Reported-by: Cedric Wassenaar Signed-off-by: Junxiao Chang Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: stmmac: switch to use interrupt for hw crosstimestamping

2022-07-18T10:14:35+00:00

Using current implementation of polling mode, there is high chances we will hit into timeout error when running phc2sys. Hence, update the implementation of hardware crosstimestamping to use the MAC interrupt service routine instead of polling for TSIS bit in the MAC Timestamp Interrupt Status register to be set. Cc: Richard Cochran Signed-off-by: Wong Vee Khee Signed-off-by: David S. Miller

net: stmmac: fix unbalanced ptp clock issue in suspend/resume flow

2022-07-15T11:06:56+00:00

Current stmmac driver will prepare/enable ptp_ref clock in stmmac_init_tstamp_counter(). The stmmac_pltfr_noirq_suspend will disable it once in suspend flow. But in resume flow, stmmac_pltfr_noirq_resume --> stmmac_init_tstamp_counter stmmac_resume --> stmmac_hw_setup --> stmmac_init_ptp --> stmmac_init_tstamp_counter ptp_ref clock reference counter increases twice, which leads to unbalance ptp clock when resume back. Move ptp_ref clock prepare/enable out of stmmac_init_tstamp_counter to fix it. Fixes: 0735e639f129d ("net: stmmac: skip only stmmac_ptp_register when resume from suspend") Signed-off-by: Biao Huang Signed-off-by: David S. Miller

net: stmmac: fix pm runtime issue in stmmac_dvr_remove()

2022-07-15T11:06:56+00:00

If netif is running when stmmac_dvr_remove is invoked, the unregister_netdev will call ndo_stop(stmmac_release) and vlan_kill_rx_filter(stmmac_vlan_rx_kill_vid). Currently, stmmac_dvr_remove() will disable pm runtime before unregister_netdev. When stmmac_vlan_rx_kill_vid is invoked, pm_runtime_resume_and_get in it returns EACCESS error number, and reports: dwmac-mediatek 11021000.ethernet eth0: stmmac_dvr_remove: removing driver dwmac-mediatek 11021000.ethernet eth0: FPE workqueue stop dwmac-mediatek 11021000.ethernet eth0: failed to kill vid 0081/0 Move the pm_runtime_disable to the end of stmmac_dvr_remove to fix this issue. Fixes: 6449520391dfc ("net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()") Signed-off-by: Biao Huang Signed-off-by: David S. Miller

stmmac: dwmac-mediatek: fix clock issue

2022-07-15T11:06:55+00:00

The pm_runtime takes care of the clock handling in current stmmac drivers, and dwmac-mediatek implement the mediatek_dwmac_clks_config() as the callback for pm_runtime. Then, stripping duplicated clocks handling in old init()/exit() to fix clock issue in suspend/resume test. As to clocks in probe/remove, vendor need symmetric handling to ensure clocks balance. Test pass, including suspend/resume and ko insertion/remove. Fixes: 3186bdad97d5 ("stmmac: dwmac-mediatek: add platform level clocks management") Signed-off-by: Biao Huang Reviewed-by: Matthias Brugger Signed-off-by: David S. Miller

net: stmmac: fix leaks in probe

2022-07-13T13:21:42+00:00

These two error paths should clean up before returning. Fixes: 2bb4b98b60d7 ("net: stmmac: Add Ingenic SoCs MAC support.") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller

net: stmmac: dwc-qos: Disable split header for Tegra194

2022-07-08T00:05:01+00:00

There is a long-standing issue with the Synopsys DWC Ethernet driver for Tegra194 where random system crashes have been observed [0]. The problem occurs when the split header feature is enabled in the stmmac driver. In the bad case, a larger than expected buffer length is received and causes the calculation of the total buffer length to overflow. This results in a very large buffer length that causes the kernel to crash. Why this larger buffer length is received is not clear, however, the feedback from the NVIDIA design team is that the split header feature is not supported for Tegra194. Therefore, disable split header support for Tegra194 to prevent these random crashes from occurring. [0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/ Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jon Hunter Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.com Signed-off-by: Jakub Kicinski

stmmac: intel: Fix an error handling path in intel_eth_pci_probe()

2022-06-07T09:56:29+00:00

When the managed API is used, there is no need to explicitly call pci_free_irq_vectors(). This looks to be a left-over from the commit in the Fixes tag. Only the .remove() function had been updated. So remove this unused function call and update goto label accordingly. Fixes: 8accc467758e ("stmmac: intel: use managed PCI function on probe and resume") Signed-off-by: Christophe JAILLET Reviewed-by: Wong Vee Khee Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni